Fractal analysis of hydroxyapatite from nitrogen isotherms

Samples of calcium hydroxyapatite, CaHap, were prepared via a wet method and subjected to thermal treatment in air in the temperature range 100-900 degrees C. Nitrogen adsorption-desorption isotherms were obtained on different samples, and their data points were used to analyze the fractal properties of the obtained solids. Both FHH and Neimark's equations were used for such purpose, and the agreement or disagreements between obtained results on using both equations are discussed. Considering the appropriate values of the obtained surface fractal dimensions D, it was concluded that an appreciable defractalization of the prepared hydroxyapatite is only noted upon calcinations at 900 degrees C. Below this temperature the loss in surface area and pore volume result from simultaneous bulk and surface mass transport, which conserve the initial surface roughness and average pore radius. Calcination at 900 degrees C caused sintering to proceed via bulk mass transport, with a consequent pore widening and a decrease in surface roughness.     

Synthesis of ferrocenyl-1,2-diketones and related compounds: Crystal and molecular structures of 1,2-diferrocenylethanedione and 1-ferrocenyl-2-(4-biphenylyl) ethanedione

Ferrocenyl-1,2-diketones FcCOCOR, 3, [Fc = (C₅H₅)Fe(C₅H₄)] can be prepared by oxidation of acylferrocenes FcCOCH₂R or, more efficiently, by oxidation of the isomeric ketones FcCH₂COR, 2. The ketones 2 are in turn readily synthesized from the salt (FcCH₂PPh₃)⁺I⁻ via the acylated salts [FcCH(COR)PPh₃]⁺I⁻. The haloacylferocenes FcCOCCl_x H_3−x (x = 1, 2, 3, of which the x = 2 example is synthetically equivalent to a diketone) are synthesized by Friedel—Crafts acylation of ferrocene using CCl_xH_3−xCOCl/AlCl₃, but the reaction proceeds via two parallel pathways, one giving the normal acyl derivatives FcCOCCl_xH_3−x and the other giving the reduced products FcCOCCl_x−1H_4−x. Two diketones FcCOCOFc 3b and FcCOCOC₆H₄Ph 3c have been structurally characterised by single-crystal X-ray diffraction.     

Novel correlations between the critical constants of the noble gases

For any particular fluid, the set of three critical constants (CC) – pressure P_c, temperature T_c and molar volume V_c – has a central importance in defining the physical behaviour of the fluid in the gas and liquid states. However, little attention seems to have been paid in the past to the relations between the CC of different substances. In the present paper, some simple and apparently novel relations have been found between the three CC for the set of four noble gases: Ne, Ar, Kr, Xe. Defining the critical quotient Q_c ≡ RT_c/P_c (where R is the Gas Constant) the correlations may be summarised by the dual equation: (V_c/cm³ mol⁻¹) = 27 + 0.31 (T_c/K) = 3.3 + 0.280 (Q_c/cm³ mol⁻¹), which describes the CC data for the quartet Ne–Xe with an average uncertainty of 0.5%. Regarding the other two noble gases, the two isotopes of the lightest member, ³He and ⁴He, show the deviations from these relations that are expected from quantal effects and their low molar masses; while for the heaviest member, Rn, the correlations enable a value of 145(5) cm³ mol⁻¹ to be estimated for V_c that is not otherwise well defined in the literature. By contrast, and contrary to the general assumption, the second lightest member, Ne, apparently does not show appreciable quantal effects in the area, so that Ne–Xe may be considered together as a group. These correlations are compared with the behaviour of a selection of polyatomic fluids; in these comparisons, the NG dual correlation equation provides a reference line defining the presumed simplest behaviour. This and related areas show a “Residual Volume Effect”, in that extrapolating the equivalent temperature and energy parameters to zero for the state of zero-mass point particles, referred to here as the hypothetical element zeronium (Ze), the system in each case still has a finite intercept; this intercept amounts to essentially 34% of the average volume for the present quartet Ne–Xe, rather than the zero volume expected for this condition.     

3-MCPD in food other than soy sauce or hydrolysed vegetable protein (HVP)

This review gives an overview of current knowledge about 3-monochloropropane-1,2-diol (3-MCPD) formation and detection. Although 3-MCPD is often mentioned with regard to soy sauce and acid-hydrolysed vegetable protein (HVP), and much research has been done in that area, the emphasis here is placed on other foods. This contaminant can be found in a great variety of foodstuffs and is difficult to avoid in our daily nutrition. Despite its low concentration in most foods, its carcinogenic properties are of general concern. Its formation is a multivariate problem influenced by factors such as heat, moisture and sugar/lipid content, depending on the type of food and respective processing employed. Understanding the formation of this contaminant in food is fundamental to not only preventing or reducing it, but also developing efficient analytical methods of detecting it. Considering the differences between 3-MCPD-containing foods, and the need to test for the contaminant at different levels of food processing, one would expect a variety of analytical approaches. In this review, an attempt is made to provide an up-to-date list of available analytical methods and to highlight the differences among these techniques. Finally, the emergence of 3-MCPD esters and analytical techniques for them are also discussed here, although they are not the main focus of this review.     

Chemical Proteomics and Phenotypic Profiling Identifies the Aryl Hydrocarbon Receptor as a Molecular Target of the Utrophin Modulator Ezutromid

Duchenne muscular dystrophy (DMD) is a fatal muscle‐wasting disease arising from mutations in the dystrophin gene. Upregulation of utrophin to compensate for the missing dystrophin offers a potential therapy independent of patient genotype. The first‐in‐class utrophin modulator ezutromid/SMT C1100 was developed from a phenotypic screen through to a Phase 2 clinical trial. Promising efficacy and evidence of target engagement was observed in DMD patients after 24 weeks of treatment, however trial endpoints were not met after 48 weeks. The objective of this study was to understand the mechanism of action of ezutromid which could explain the lack of sustained efficacy and help development of new generations of utrophin modulators. Using chemical proteomics and phenotypic profiling we show that the aryl hydrocarbon receptor (AhR) is a target of ezutromid. Several lines of evidence demonstrate that ezutromid binds AhR with an apparent K_D of 50 nm  and behaves as an AhR antagonist. Furthermore, other reported AhR antagonists also upregulate utrophin, showing that this pathway, which is currently being explored in other clinical applications including oncology and rheumatoid arthritis, could also be exploited in future DMD therapies.     

Bimodal Fluorescence/Magnetic Resonance Molecular Probes with Extended Spin Lifetimes

Bimodal molecular probes combining nuclear magnetic resonance (NMR) and fluorescence have been widely studied in basic science, as well as clinical research. The investigation of spin phenomena holds promise to broaden the scope of available probes allowing deeper insights into physiological processes. Herein, a class of molecules with a bimodal character with respect to fluorescence and nuclear spin singlet states is introduced. Singlet states are NMR silent but can be probed indirectly. Symmetric, perdeuterated molecules, in which the singlet states can be populated by vanishingly small electron-mediated couplings (below 1 Hz) are reported. The lifetimes of these states are an order of magnitude longer than the longitudinal relaxation times and up to four minutes at 7 T. Moreover, these molecules show either aggregation induced emission (AIE) or aggregation caused quenching (ACQ) with respect to their fluorescence. In the latter case, the existence of excited dimers, which are proposed to use in a switchable manner in combination with the quenching of nuclear spin singlet states, is observed     

Gas-Phase studies of valinomycin-alkali metal cation complexes: attachment rates and cation affinities

Reactions of laser-desorbed Na⁺, K⁺, Rb⁺, and Cs⁺ with thermally vaporized valinomycin generate metal-ligand complexes in a Fourier transform ion cyclotron resonance trapping cell, proving that complexes can form via gas-phase ion-molecule reactions. Although desorption of intact pre-formed complexes cannot be ruled out, this route appears minor. Relative rate constants for the complexation reactions show strong dependence on the charge densities of the cations. Competition experiments between valinomycin and the synthetic ionophores 18-crown-6 (18C6) and [2.2.2]-cryptand ([2.2.2]) show that valinomycin has a higher intrinsic alkali metal cation affinity than either 18C6 or [2.2.2], in contrast to the complex formation constants observed in methanol, where K+ affinities are in the order [2.2.2] > 18C6 > valinomycin.     

Advances in ultra-high load polymer-supported peptide synthesis with phenolic supports: 2. Use of ‘hydrazinolysis-hplc’ to check for racemization on c-terminal amino acid loading and to determine peptide homogeneity during synthesis with selectively labile c-terminal anchoring linkages

2, 4-Dinitrophenyl-L-phenylalanine has been coupled to L-, D-, and DL-amino acid phenyl esters pendant upon a polymer matrix. The esters had been prepared by di-isopropylcarbodiimide-mediated condensation, catalyzed by 4-dimethylaminopyridine. Reverse phase high pressure liquid chromatography (HPLC), using elution solvents consisting of 10 vol.-% trifluoroacetic acid in water/acetonitrile mixtures, has been used to investigate the 2,4-dinitrophenyl L-L and L-D dipeptide mixtures obtained on hydrazinolysis of each of the dipeptide-matrix assemblies. ‘Hydrazinolysis-HPLC’ has been used also to determine intermediate peptide homogeneity in ultra-high load solid (gel) phase synthesis with Boc amino acids. Cross-linked poly(N-[2-(4-hydroxyphenyl)ethyl]acrylamide) and two derived polymers incorporating spacer groups have been used as supports. The spacer groups made possible peptide C-terminal attachment by either HF-labile benzyl ester or HF-labile cyclohexyl ester bonds, while still incorporating the phenolic ester linkage susceptible to rapid hydrazinolytic scission.     

Matching subsequences in trees

Given two rooted, labeled trees P and T the tree path subsequence problem is to determine which paths in P are subsequences of which paths in T. Here a path begins at the root and ends at a leaf. In this paper we propose this problem as a useful query primitive for XML data, and provide new algorithms improving the previously best known time and space bounds.