Recent improvements of the ion analyzer and typical examples of applications

Improvements of a CAMECA IMS 300 ion microanalyzer are described: ion source, resolution, ion detector and counting system. Comparison with the performances of an electron microprobe is presented. Examples of application are given.     

Ultraviolet protection factors for clothing: an intercomparison of measurement systems

In recent years the need to standardize measurement protocols for quantifying the degree of ultraviolet radiation (UVR) protection provided by clothing has led to the introduction of a number of standards around the world. To date, these standards have specified spectral measurements of UVR transmission by clothing and fabrics. Development of a standard test method has become an important part of the testing process, and this article presents results from an intercomparison involving 10 independent testing laboratories and 11 different UVR transmission measurement instruments. In addition to comparing the measured ultraviolet protection factors (UPF), this intercomparison also incorporates detailed scan results from all 10 laboratories and highlights differences in performance of the various instruments in different wavelength regions. Careful examination of these differences can indicate where changes to the systems could be made to allow improvements both in equipment performance and in agreement of the final results. The variability in the measurements of UPF in this study suggest that the protection categories in standards may need to be broadened.     

Effect of trace amounts of water on organic solvent transport through gamma-alumina membranes with varying pore sizes

The transport behavior of toluene and n-hexane in gamma-alumina membranes with different pore diameters was studied. It was shown that the permeability of water-lean hexane and toluene is in agreement with Darcy's law down to membrane pore diameters of 3.5 nm. The presence of molar water fractions of 5-8 x 10(-4) in these solvents led to a permeability decrease of the gamma-alumina layer by a factor of 2-4 depending on pore size. In general, a lower permeability was found for hexane than for toluene. Moreover, in the presence of water a minimum applied pressure of 0.5-1.5 bar was required to induce net liquid flow through the membrane. These phenomena were interpreted in terms of capillary condensation of water in membrane pores with a size below a certain critical diameter. This is thought to lead to substantial blocking of these pores for transport, so that the effective tortuosity of the membrane for transport of hydrophobic solvents increases.     

Loss of metallicity in metal rich lithium oxide clusters

Mixed lithium-lithium oxide aggregates are experimentally obtained from unimolecular evaporative cascades starting at metal rich Li _p ⁺ (Li₂O)_n species and ending with the stoichiometric limit Li⁺(Li₂O)_n, for several sizes of the oxide part (Li₂O)_n with 0 ≤ n ≤ 8. The results show evidence of the vanishing of the properties of the quantum metallic droplet i.e. shell closing and odd-even alternation, portrayed in the dissociation energy, with increasing size of the oxide component. The competition between monomer and dimer lithium evaporation from the heated metal rich Li _p ⁺ (Li₂O)_n species points out the influence of the perturbation induced by the oxide component on the mixed metal oxide clusters.     

Automated determination of verapamil and norverapamil in human plasma with on-line coupling of dialysis to high-performance liquid chromatography and fluorometric detection

A fully automated method for the simultaneous determination of verapamil and its main metabolite norverapamil in human plasma is described. This method is based on on-line sample preparation using dialysis followed by clean-up and enrichment of the dialysate on a precolumn and subsequent HPLC analysis with fluorometric detection. All sample handling operations were performed automatically by a sample processor equipped with a robotic arm (ASTED system). The plasma samples were dialysed on a cellulose acetate membrane (cut-off: 15 kD) and the dialysate was purified and enriched on a short pre-column filled with cyanopropyl silica. Before starting dialysis, this trace enrichment column (TEC) was first conditioned with the HPLC mobile phase and then with pH 3.0 acetate buffer. 370 μl of plasma sample spiked with the internal standard (gallopamil) were dialysed in the static-pulsed mode. The solution at the donor side was pH 3.0 acetate buffer containing Triton X-100 while the acceptor solution was made of the same acetate buffer. When dialysis was discontinued, the analytes were desorbed from the TEC by the HPLC mobile phase and transferred to the C₁₈ analytical column by means of a switching valve. This mobile phase consisted of a mixture of acetonitrile, pH 3.0 acetate buffer and 2-aminoheptane. The influence of different parameters of the dialysis process on the recovery of verapamil and norverapamil has been studied. The effect of the volume, the aspirating and dispensing flow-rates of the dialysis solution has been investigated. The recoveries of verapamil and norverapamil in plasma were close to 75% and the limits of quantification were 5 ng/ml for both analytes. The method was found to be linear in the concentration range from 5 to 500 ng/ml (r²: 0.9996 for both analytes). The intra-day and inter-day reproducibilities at a concentration of 100 ng/ml were 2.3% and 5.6% for verapamil and 1.7% and 5.1% for norverapamil, respectively.     

Determination of weak (2.0–2.5) dissociation constants of non-UV absorbing solutes by capillary electrophoresis

Summary Capillary electrophoresis (CE) has proved to be a fast and convenient method for the determination of the dissociation constants of non-UV absorbing solutes in the acidic pK _A range (2.0–2.5). The electroosmotic flow was reversed by washing the capillary with 0.2% polybren aqueous solution. A series of background electrolytes was prepared with phenylphosphonic acid (pK _A=1.29) and β-alanine (pK _A=3.55) with the same ionic strength and a high buffer capacity in order to improve the repeatability (0.1–0.2 %) of the electrophoretic mobility and to determine the values of pK _A accurately. This procedure was applied to the determination of the dissociation constants of several alkyl-alkylphosphonic acids whose pK _A values have not yet been published in the literature. In this work, their dissociation constants have been found to vary between 1.91 and 2.34 for alkyl-methylphosphonic acids and between 2.10 and 2.38 for alkyl-ethylphosphonic acids.     

Supramolecular organization of alpha,alpha'-disubstituted sexithiophenes

The self-assembly of alpha,alpha'-linked sexithiophenes with chiral and achiral penta(ethylene glycol) chains attached at the alpha-positions of the terminal rings, that is, 2,2':5',2':5',2':5',2':5',2'-sexithiophene-5,5'-dicarboxylic acid-2S)-2-methyl-3,6,9,12,15-pentaoxahexadecyl ester (1) and 2,2':5',2':5',2':5',2':5',2'-sexithiophene-5,5'-dicarboxylic acid-3,6,9,12,15-pentaoxahexadecyl ester (2), respectively is described. Analysis of the UV/vis, fluorescence, circular dichroism, and circular polarization of luminescence spectroscopic data shows that these compounds form chiral aggregates in polar solvents and in the solid state. In n-butanol aggregation occurs at temperatures below 30 degrees C, while above this threshold temperature the aggregates break up without an intermediate disordered state of aggregation, and the compounds are molecularly dissolved. The "melting temperature" of the aggregates depends on the concentration of sexithiophene, indicating that the optical changes observed are a result of intermolecular processes. Mass spectrometric measurements reveal that 1 and 2 can form mixed aggregates. Analysis of the optical spectra reveals that in these mixed aggregates, chiral 1 molecules act as "sergeants" to direct the packing of the "soldiers" 2, illustrating cooperativity within the columns. In water, the same type of chiral aggregates are formed as in n-butanol below 30 degrees C; however, these aggregates are still present, but the chirality is lost above 30 degrees C. In spin-coated films of 1 chiral aggregates are present. AFM studies show that 1 self-organizes into chiral fiberlike structures in the solid state. Furthermore both 1 and 2 display thermotropic liquid crystalline behavior between 180 and 200 degrees C.     

Separation of antimony(III) with iodide and dithizone by sorption on polyurethane foam from sulphuric acid medium for its spectrophotometric determination in glasses

A method for quantitative separation of antimony(III) by sorption on polyether based polyurethane foam and its spectrophotometric determination has been described. The method involves formation of a pink-red complex of antimony(III) with iodide (0.045M) and dithizone (2.3 x 10(-5)M) in 0.25-0.75M H(2)SO(4) medium, sorption of the complex on polyurethane foam (within 45 min) at room temperature followed by its elution with acidified acetone (acetone containing 0.008% H(2)SO(4)) and spectrophotometric measurement at 507.2 nm ( = 2.56 x 10(4) l mol cm). The method obeys Beer's law from 0.1 to 6.0 mug antimony(III). Tolerance limits of other ions are Co (100 mug), Ni (100 mug), Fe (10 mug), Cu (0.5 mug), Sn (20 mug), Zn (100 mug), As (100 mug), Mn (200 mug), Pb (50 mug), Ti (100 mug), V (50 mug), etc. Interference by iron and copper have been eliminated by treating with KOH prior to the extraction of antimony. The method has been standardized with glass samples spiked with known amounts of antimony and applied to the determination of antimony in various glasses.     

Cyclopropane chemistry. Part 5 [1,2]. Hexafluorocyclopropane as a source of difluorocarbene

Thermolysis of hexafluorocyclopropane in the presence of ethylene, propene, vinyl chloride, and vinyl bromide gives good yields of the corresponding 1,1-difluorocyclopropanes, formed by addition of difluorocarbene to the olefin. The tetrafluoroethylene formed dimerises to octafluorocyclobutane, co-dimerises with the olefin, or survives, depending on the reaction conditions. With allene, hexafluorocyclopropane gives 1-(difluoromethylene)cyclopropane, 2,2,3,3-tetrafluorospiropentane, and products derived from tetrafluoroethylene and allene.     

An integrated process for purification of lysozyme, ovalbumin, and ovomucoid from hen egg white

This article describes an integrated process for simultaneous purification of lysozyme, ovalbumin, and ovomucoid from hen egg white. The crude egg white extract was passed through a cation exchanger Streamline trade mark SP and the bound lysozyme was eluted with 5% ammonium carbonate, pH 9.0, containing 1 M NaCl after elution of avidin. This partially purified lysozyme was further purified 639-fold on dye-linked cellulose beads. Ovalbumin and ovomucoid did not bind to Streamline SP. Ovalbumin could be precipitated from this unbound fraction by 5% trichloroacetic acid, and ovomucoid was removed from the supernatant by precipitation with ethanol. The yields of lysozyme, ovomucoid, and ovalbumin were 77, 94, and 98%, respectively. All the purified proteins showed single bands on sodium dodecyl sulfate polyacrylamide gel electrophoresis. All the steps are easily scalable, and the process described here can be used for large-scale simultaneous purification of these proteins in the pure form.