Preparation and Eh--pH diagrams of Fe(II)--Fe(III) green rust compounds; hyperfine interaction characteristics and stoichiometry of hydroxy-chloride, -sulphate and -carbonate

Fe(II)--Fe(III) hydroxy-chloride, -sulphate and -carbonate were prepared by oxidation of a ferrous hydroxide precipitate in anion-containing aqueous solutions. The compounds are characterized by monitoring the redox potential E_h and the pH of stochiometric suspension vs time with the appropriate concentration ratios. X-ray diffraction allows us to characterize the crystal structure by distinguishing “green rust one” (GR1) from “green rust two” (GR2). Since green rusts (GRs) are of a pyroaurite-sjögrenite-like structure, i.e., consisting of intercalated foreign anions and water molecules in the interlayers between the brucite-like layers of Fe(OH)₂, their chemical formulae can be determined from the Mössbauer spectra. Three quadrupole doublets are observed: D₁ and D₂ correspond to a ferrous state with isomershift IS of about 1.27 mm s^-1 and quadrupole splittings QS of about 2.85 and 2.60 mm s^-1, respectively, whereas D₃ corresponds to a ferric state with IS and QS of about 0.4 mm s^-1. The hyperfine parameters of these doublets are similar from one green rust to another but their intensity ratios vary considerably. Finally, E_h and pH equilibrium diagrams of the Fe species in the presence of chloride, sulphate and carbonate anions contained within the water solution are drawn and the thermodynamic conditions of existence and degrees of oxidation of green rusts are discussed.     

Random Classical Fidelity

We introduce a random perturbed version of the classical fidelity and we show that it converges with the same rate of decay of correlations, but not uniformly in the noise. This makes the classical fidelity unstable in the zero-noise limit.     

Quantitative Comparison of REAPDOR and TRAPDOR Experiments by Numerical Simulations and Determination of H–Al Distances in Zeolites

Quantitative H–Al distances in acid sites of two zeolites with MFI and IFR framework topology were obtained by numerical simulation of ¹H{²⁷Al} rotational echo adiabatic passage double resonance (REAPDOR) experiments. A ²⁷Al offset-dependent data set yields for each resolved ¹H NMR line a corresponding nuclear electric quadrupole coupling constant of the neighboring ²⁷Al site. This information is used for analyzing a second data set for on-resonance irradiation, where the dipolar evolution time (number of rotor cycles) was varied, to yield the ¹H–²⁷Al dipolar coupling constant. Numerical simulations indicate that the REAPDOR method does not depend significantly on the polar angles, defining the orientation of the electric field gradient tensor of ²⁷Al with respect to the Al–H dipolar vector. In contrast, the transfer of populations in double resonance sequence is sensitive to these angles, and it can be thus used to measure them.     

The role of alkali content in the devitrification mechanisms of SiO2–Fe2O3–Na2O–PbO SYSTEM

Three batch compositions of pure oxides (SiO₂, Fe₂O₃, PbO, Na₂O) with equivalent SiO₂, Fe₂O₃ and PbO contents and a gradually increased Na₂O content were vitrified through heating in a high temperature electric furnace and subsequent quenching. The resulting vitreous products were thermally treated in order to study the devitrification behaviour, under conditions designated from differential thermal analysis experiments. Depending on the Na₂O content, crystal phase separation gave rise to the growth of acmite and hematite or maghemite. A uniformly phase separated glass-ceramic material, with crystallites of similar size and population density, was produced from devitrification of the vitreous product with the higher Na₂O content.     

Microstructural assessment of InN-on-GaN films grown by plasma-assisted MBE

The structural properties of InN thin films, grown by rf plasma-assisted molecular beam epitaxy on Ga-face GaN/Al₂O₃(0001) substrates, were investigated by means of conventional and high resolution electron microscopy. Our observations showed that a uniform InN film of total thickness up to 1 μm could be readily grown on GaN without any indication of columnar growth. A clear epitaxial orientation relationship of , was determined. The quality of the InN film was rather good, having threading dislocations as the dominant structural defect with a density in the range of 10⁹–10¹⁰ cm⁻². The crystal lattice parameters of wurtzite InN were estimated by electron diffraction analysis to be a=0.354 nm and c=0.569 nm, using Al₂O₃ as the reference crystal. Heteroepitaxial growth of InN on GaN was accomplished by the introduction of a network of three regularly spaced misfit dislocation arrays at the atomically flat interface plane. The experimentally measured distance of misfit dislocations was 2.72 nm. This is in good agreement with the theoretical value derived from the in-plane lattice mismatch of InN and GaN, which indicated that nearly full relaxation of the interfacial strain between the two crystal lattices was achieved.     

Matrix effects in the determination of butyltin compounds in environmental samples by GC AA after hydride generation

Experiments for the determination of mono-, di and tri-butyltin (MBT, DBT and TBT) by hydride generation/gas chromatography/atomic absorption spectrometry in various matrices (sediment, suspended matter, mussel, algae and water) have revealed that poor butyltin recoveries are obtained in sediments displaying high sulphur and hydrocarbon contents; very poor recoveries were also observed for TBT in sediments with high chlorophyll pigment contents as well as in algal samples. It was however not clear whether the hydride generatin was inhibited by these infering compounds, as was previously assumed in the case of hydrocarbons, or whether interferences affected the atomization rate. Further studies were performed to solve this problem in order to validate this method in the case of analyses of, for example, oil-contaminated sediment and algae. This paper presents the results obtained. It is concluded here that the poor recoveries were due to an inhibition of hydride generation rather than to interference at the atomization stage.     

Bivariate Free Knot Splines

We consider the least squares approximation of gridded 2D data by tensor product splines with free knots. The smoothing functional to be minimized—a generalization of the univariate Schoenberg functional—is chosen in such a way that the solution of the bivariate problem separates into the solution of a sequence of univariate problems in case of fixed knots. The resulting optimization problem is a constrained separable least squares problem with tensor product structure. Based on some ideas developed by the authors for the univariate case, an efficient method for solving the specially structured 2D problem is proposed, analyzed and tested on hand of some examples from the literature.