Carbenoid chain reactions: substitutions by organolithium compounds at unactivated 1-chloro-1-alkenes

The deceptively simple "cross-coupling" reactions Alk(2)C=CA-Cl + RLi --> Alk(2)C=CA-R + LiCl (A = H, D, or Cl) occur via an alkylidenecarbenoid chain mechanism in three steps without a transition metal catalyst. In the initiating step 1, the sterically shielded 2-(chloromethylidene)-1,1,3,3-tetramethylindans 2a-c (Alk(2)C=CA-Cl) generate a Cl,Li-alkylidenecarbenoid (Alk(2)C=CLi-Cl, 6) through the transfer of atom A to RLi (methyllithium, n-butyllithium, or aryllithium). The chain cycle consists of the following two steps: (i) A fast vinylic substitution reaction of these RLi at carbenoid 6 (step 2) with formation of the chain carrier Alk(2)C=CLi-R (8), and (ii) a rate-limiting transfer of atom A (step 3) from reagent 2 to the chain carrier 8 with formation of the product Alk(2)C=CA-R (4) and with regeneration of carbenoid 6. This chain propagation step 3 was sufficiently slow to allow steady-state concentrations of Alk(2)C=CLi-Aryl to be observed (by NMR) with RLi = C6H5Li (in Et2O) and with 4-(Me3Si)C6H4Li (in t-BuOMe), whereas these chain processes were much faster in THF solution. PhC[triple bond]CLi cannot perform step 1, but its carbenoid chain processes with reagents 2a and 2c may be started with MeLi, whereafter LiC[triple bond]CPh reacts faster than MeLi in the product-determining step 2 to generate the chain carrier Alk(2)C=CLi-C[triple bond]CPh (8g), which completes its chain cycle through the slower step 3. The sterically congested products were formed with surprising ease even with RLi as bulky as 2,6-dimethylphenyllithium and 2,4,6-tri-tert-butylphenyllithium.     

C60 thin film growth on graphite: Coexistence of spherical and fractal-dendritic islands

The initial growth stage of C(60) thin film on graphite substrate has been investigated by scanning tunneling microscopy in ultrahigh vacuum at room temperature. The C(60) layer grows in a quasi-layer-by-layer mode and forms round, monolayer high islands on the graphite surface. The islands are confined by terraces on the graphite surface and the mobility of C(60) fullerenes across steps is low in all layers. The second and all subsequent layers adopt a fractal-dendritic shape, which was confirmed by calculating the fractal dimension (D=1.74 prior to island coalescence) and is in agreement with a diffusion limited aggregation. The profound differences between the growth of C(60) layers on graphite (first layer) and on C(60) surfaces (second and higher layers) are caused by the restriction of the C(60) mobility on the highly corrugated fullerene surfaces. The orientation of the fractal islands follows the hexagonal symmetry of the densely packed (111) surface of the fullerene lattice, which introduces a bias in the direction of molecule movement. The differences in surface topography on the nanoscale determine the mode of film growth in this van der Waals bonded system.     

Exploitation of the coil-globule plasmid DNA transition induced by small changes in temperature, pH salt, and poly(ethylene glycol) compositions for directed partitioning in aqueous two-phase systems

In this study, the interplay of two linked equilibria is examined, one concerning an aqueous two-phase system (ATPS) composed of poly(ethylene glycol) (PEG) and salt employed to partition plasmid DNA (pDNA), and the other a potential structural transition of pDNA depending on PEG and salt concentration and other system parameters. The boundary conditions for pDNA partitioning are set by PEG and salt concentrations, PEG molecular weight, pH, and temperature. While investigating these parameters, it was found that a small increase/decrease of the respective values led to a drastic and significant change in pDNA behavior. This behavior could be attributed to a coil-globule transition of the pDNA triggered by the respective phase conditions. The combination of this structural change, aggregation effects linked to the transition process, and the electrostatic potential difference found in PEG-salt systems thus offers a sensitive way to separate nucleic acid forms on the basis of their unique property to undergo coil-globule transitions under distinct system properties.     

Chiral seleno-amines from indium selenolates. A straightforward synthesis of selenocysteine derivatives

A simple and efficient procedure for the synthesis of chiral beta-seleno-amines derivatives from a one-pot indium(I) iodide-mediated aziridine ring opening with diorganoyl diselenides has been developed. As an application, the synthesis of selenocysteine and selenotreonine derivatives has been accomplished.     

Design considerations for high speed quantitative mass spectrometry with MALDI ionization

A MALDI ion source on a triple quadrupole mass spectrometer constructed for the purpose of obtaining high speed quantitative measurements on drugs and other low molecular weight compounds is described. Particular attention is given to the ion generation and transport phenomena that affect analysis speed, throughput, and practical instrument robustness. In this regard parameters that affect desorption speed, beam spreading, ion flight times, sensitivity, signal-to-noise, ion fragmentation, sample carry-over, and instrument contamination are examined and experimental results are provided. MALDI and electrospray sensitivity is compared, to provide a practical frame of reference.     

Metabolic engineering of Pseudomonas putida for methylmalonyl-CoA biosynthesis to enable complex heterologous secondary metabolite formation

An operon consisting of three open reading frames, annotated in silico as methylmalonyl-CoA (mm-CoA) epimerase, mm-CoA mutase (MCM), and meaB, was identified in the sequencing project of the myxobacterium Sorangium cellulosum So ce56. This putative MCM pathway operon was subcloned from a bacterial artificial chromosome by Red/ET recombineering onto a minimal replicon derived from p15A. This plasmid was modified for integration and heterologous expression in Pseudomonas putida to enable the production of complex secondary metabolites requiring mm-CoA as precursor. Methylmalonate was identified in the recombinant P. putida strain by an analysis method based on gas chromatography/mass spectrometry. The engineered strain is able to synthesize polyketides requiring mm-CoA as an extender unit, which was demonstrated by the production of myxothiazol after integration of the biosynthetic gene cluster into the chromosome, followed by induction of expression.     

Single diastereomers of polyhydroxylated 9-oxa-1-azabicyclo[4.2.1]nonanes from intramolecular 1,3-dipolar cycloaddition of omega-unsaturated nitrones

8-Benzyloxymethyl-3,4,5-tribenzoyloxy-9-oxa-1-azabicyclo[4.2.1]nonane has been prepared as the single diastereoisomer 8 from an intramolecular 1,3-dipolar cycloaddition involving 2-(benzyloxy)acetaldehyde and omega-unsaturated hydroxylamine 7 derived from methyl alpha-D-glucopyranoside. The analogous 8-methoxycarbonyl 9-oxa-1-azabicyclo[4.2.1]nonane was afforded in a similar manner, from methyl D-galactopyranoside and methyl glyoxylate, as a 3:1 mixture of diastereoisomers 15 and 16. When conducted in achiral ionic liquid 17 this ratio increased to 8:1, and in chiral ionic liquid 18, compound 15 was formed exclusively.     

Regiospecific synthesis of 4-alkoxy and 4-amino substituted 2-trifluoromethyl pyrroles

A simple and regiospecific synthesis of 4-alkoxy(amino)-2-trifluoromethyl pyrroles from 5-azido-4-alkoxy(amino)-1,1,1-trifluoro-pent-3-en-2-ones by an aza-Wittig cyclization of aminophosphoranes is described. The structures of the pyrroles and their synthetic intermediates were supported by NMR and HRMS analysis.     

New demodulation filter in digital phase rotation beamforming

In this paper, we present a new quadrature demodulation filter to reduce hardware complexity in digital phase rotation beamforming. Due to its low sensitivity to phase delay errors, digital quadrature demodulation is commonly used in ultrasound machines. However, since it requires two lowpass filters for each channel to remove harmonics, the direct use of conventional finite impulse response (FIR) filters in ultrasound machines is computationally expensive and burdensome. In our new method, an efficient multi-stage uniform coefficient (MSUC) filter is utilized to remove harmonic components in phase rotation beamforming. In comparison with the directly implemented FIR (DI-FIR) and the previously-proposed signed-power-of-two FIR (SPOT-FIR) lowpass filters, the proposed MSUC filter reduces the necessary hardware resources by 93.9% and 83.9%, respectively. In simulation, the MSUC filter shows a negligible degradation in image quality. The proposed method resulted in comparable spatial and contrast resolution to the DI-FIR approach in the phantom study. These preliminary results indicate that the proposed quadrature demodulation filtering method could significantly reduce the hardware complexity in phase rotation beamforming while maintaining comparable image quality.     

Nonunity gain quantum nondemolition measurements based on measurement and repreparation

We demonstrate experimentally a nonunity gain quantum nondemolition measurement based on a simple homodyne measurement and recreation strategy. Although the output state is an amplified version of the input state, the device meets standard criteria for QND measurements: the transfer coefficient was measured to 1.78, and the conditional variance was measured to 0.66.