New approach to calibrating conductivity meters in the low conductivity range

There is currently a major issue with the calibration of conductivity meters used for high purity water: the lack of availability of a reference material or reference methods for low conductivity ranges (conductivity below 1 S cm^–1 at 25.0 °C, resistivity >1 M cm at 25.0 °C). This paper describes the current status of conductivity measurements in high purity water. A new and improved approach, currently being investigated, should allow us to make the calibration of conductivity meters used for low conductivity ranges traceable to the SI.Milipore, Milli-Q and Elix are registered trademarks of Millipore Corporation.     

Square wave adsorptive stripping voltammetric determination of famotidine in urine

Electrochemical studies of famotidine were carried out using voltammetric techniques: cyclic voltammetry, linear sweep and square wave adsorptive stripping voltammetry. The dependence of the current on pH, buffer concentration, nature of the buffer, and scan rate was investigated. The best results for the determination of famotidine were obtained in MOPS buffer solution at pH 6.7. This electroanalytical procedure enabled to determine famotidine in the concentration range 1 × 10⁻⁹–4 × 10⁻⁸ mol L⁻¹ by linear sweep adsorptive stripping voltammetry (LS AdSV) and 5 × 10⁻¹⁰–6 × 10⁻⁸ mol L⁻¹ by square wave adsorptive stripping voltammetry (SW AdSV). Repeatability, precision and accuracy of the developed methods were checked. The detection and quantification limits were found to be 1.8 × 10⁻¹⁰ and 6.2 × 10⁻¹⁰ mol L⁻¹ for LS AdSV and 4.9 × 10⁻¹¹ and 1.6 × 10⁻¹⁰ mol L⁻¹ for SW AdSV, respectively. The method was applied for the determination of famotidine in urine.     

Synthesis and antimycobacterial activity of alkyl 1‐heteroaryl‐1H‐1,2,3‐triazole‐4‐carboxylates

A series of alkyl l‐heteroaryl‐1H‐1,2,3‐triazole‐4‐carboxylates 6a‐u were synthesised in four steps from methyl (Z)‐2‐benzyloxycarbonylarmino‐3‐(dimethylamino)prop‐2‐enoate ( 1 ) and heterocyclic amines 2a‐s. Triazoles 6a‐o were tested against antimycobacterial activity. For the most active compound, n‐pentyl 1‐(6‐phenylpyridazin‐3‐yl)‐1H‐1,2,3‐triazole‐4‐carboxylate ( 6n ), minimum inhibitory concentration 3.13 μg/ml was determined.     

Covalent anionic copolymer coatings with tunable electroosmotic flow for optimization of capillary electrophoretic separations

We present a method for finely adjustable electroosmotic flow (EOF) velocity in cathodic direction for the optimization of separations in capillary electrophoresis. To this end, we use surface modification of the separation fused silica capillary by the covalently attached copolymer of acrylamide (AM) and 2-acrylamido-2-methyl-1-propanesulfonate (AMPS), that is, poly(AM-co-AMPS) or PAMAMPS. Coatings were formed by the in-capillary polymerization of a mixture of the neutral AM and anionic AMPS monomers premixed in various ratios in order to control the charge density of the copolymer. EOF mobility varies in the 0 to ∼40 × 10⁻⁹ m² V⁻¹ s⁻¹ interval for PAMAMPS coatings ranging from 0 to 60 mol.% of charged AMPS monomer. For EOF in PAMAMPS-treated capillaries, we observed (i) a negligible dependence on pH in the 2–10 interval, (ii) a minor variance among background electrolytes (BGEs) in function of their components and (iii) its standard decrease with increasing ionic strength of the BGE. Interest in variable cathodic EOF was demonstrated by the amelioration of separation of two kinds of isomeric anionic analytes, that is, monosaccharides phosphates and helquat enantiomers, in counter-EOF mode.     

Enantioselective high-performance liquid chromatography of aryl-substituted oxazolines as an efficient tool for determination of chiral purity of serine medicinal components

A new approach for the evaluation of chiral purity of serine esterification products bearing long-chain alkyl substituents was developed. The compounds were simply converted to aryl-substituted oxazolines which: (i) facilitates effective chromatographic enantioseparation and (ii) enables direct detection using ultraviolet absorption. The method employs a polysaccharide-based chiral stationary phase and allows enantioseparation of highly stable oxazoline products in less than 6 min using a simple binary mobile phase. As opposed to the previously used normal phase method the developed method was performed in the reversed-phase mode. Aside from the benefits of switching to less hazardous solvents with regard to the principles of Green Chemistry, this has also led to a reduction in the analysis time. In comparison with known serine chromophores, the best enantioseparation of aryloxazoline rigid structure may be achieved only based on non-polar interactions with the chiral stationary phase. In contrast, the substitution of the chromophore moiety with hydroxyl substituent affected intra and intermolecular interactions that caused enantioseparation differences. Concurrently, we found high chirality retention of (R)- and (S)-configuration oxazoline standards (≥99% enantiomeric excess) during the introduction of the ultraviolet label. The method is suitable for rapid injection of the mixture containing the ultraviolet absorption marker without prior purification.     

Phenylene-Bridged Perylene Monoimides as Acceptors for Organic Solar Cells: A Study on the Structure–Property Relationship

A series of non-fullerene acceptors based on perylene monoimides coupled in the peri position through phenylene linkers were synthesized via Suzuki-coupling reactions. Various substitution patterns were investigated using density functional theory (DFT) calculations in combination with experimental data to elucidate the geometry and their optical and electrochemical properties. Further investigations of the bulk properties with grazing incidence wide angle X-ray scattering (GIWAXS) gave insight into the stacking behavior of the acceptor thin films. Electrochemical and morphological properties correlate with the photovoltaic performance of devices with the polymeric donor PBDB-T and a maximum efficiency of 3.17 % was reached. The study gives detailed information about structure–property relationships of perylene-linker-perylene compounds.     

An Update of Nucleic Acids Aptamers Theranostic Integration with CRISPR/Cas Technology

The clustered regularly interspaced short palindromic repeat (CRISPR)/Cas system is best known for its role in genomic editing. It has also demonstrated great potential in nucleic acid biosensing. However, the specificity limitation in CRISPR/Cas has created a hurdle for its advancement. More recently, nucleic acid aptamers known for their high affinity and specificity properties for their targets have been integrated into CRISPR/Cas systems. This review article gives a brief overview of the aptamer and CRISPR/Cas technology and provides an updated summary and discussion on how the two distinctive nucleic acid technologies are being integrated into modern diagnostic and therapeutic applications     

Influence of Initial pH Value on the Adsorption of Reactive Black 5 Dye on Powdered Activated Carbon: Kinetics,Mechanisms, and Thermodynamics

The aim of this work was to investigate the influence of initial pH value (pH₀) on the isothermal adsorption of Reactive Black 5 (RB5) dye on commercial powdered activated carbon. Four initial pH values were chosen for this experiment: pH₀ = 2.00, 4.00, 8.00, and 10.00. In order to investigate the mechanism of adsorption kinetic, studies have been performed using pseudo-first-order and pseudo-second-order kinetic models as well as an intraparticle diffusion model. In addition, thermodynamic parameters of adsorption were determined for pH₀ = 4.00. Results of this research showed that the initial pH value significantly influences the adsorption of RB5 dye onto activated carbon. The highest adsorption capacities (q_e) and efficiencies of decolouration were observed for initial pH values of pH₀ = 2.00 (q_e = 246.0 mg g⁻¹) and 10.00 (q_e = 239.1 mg g⁻¹) due to strong electrostatic interactions and attractive π···π interactions, respectively. It was also shown that the adsorption of RB5 dye on activated carbon at all initial pH values is kinetically controlled, assuming a pseudo-second-order model, and that intraparticle diffusion is not the only process that influences on the adsorption rate.     

FeIII in a high-spin state in bis(5-bromosalicylaldehyde 4-ethylthiosemicarbazonato-κ3O,N1,S)ferrate(III) nitrate monohydrate,the first example of such a cationic FeIII complex unit

The synthesis and crystal structure (100 K) of the title compound, [Fe(C₁₀H₁₁BrN₃OS)₂]NO₃·H₂O, is reported. The asymmetric unit consists of an octahedral [Fe^III(HL)₂]⁺ cation, where HL^? is H-5-Br-thsa-Et or 5-bromosalicylaldehyde 4-ethylthiosemicarbazonate(1?) {systematic name: 4-bromo-2-[(4-ethylthiosemicarbazidoidene)methyl]phenolate}, a nitrate anion and a noncoordinated water molecule. Each HL^? ligand binds via the thione S, the imine N and the phenolate O atom, resulting in an Fe^IIIS₂N₂O₂ chromophore. The ligands are orientated in two perpendicular planes, with the O and S atoms in cis and the N atoms in trans positions. This [Fe(HL)₂](anion)·H₂O compound contains the first known cationic Fe^III entity containing two salicylaldehyde thiosemicarbazone derivatives. The Fe^III ion is in the high-spin state at 100 K. In addition, a comparative IR spectroscopic study of the free ligand and the ferric complex is presented, demonstrating that such an analysis provides a quick identification of the degree of deprotonation and the coordination mode of the ligand in this class of metal compounds. The variable-temperature magnetic susceptibility measurements (5–320 K) are consistent with the presence of a high-spin Fe^III ion with a zero-field splitting D = 0.439 (1) cm^?1.     

Estimation of acidity constants,ionic mobilities and charges of antimicrobial peptides by capillary electrophoresis

Capillary electrophoresis (CE) was employed for the determination of thermodynamic acidity constants (pK_a) and actual ionic mobilities of polycationic antimicrobial peptides (AMPs). The effective electrophoretic mobilities of AMPs were measured by CE in a series of the background electrolytes within a wide pH range (2.00–12.25), at constant ionic strength (25 mM) and ambient temperature, using polybrene coated fused silica capillaries to suppress sorption of cationic AMPs to the capillary wall. Eventually, Haarhoff–Van der Linde peak fitting function was used for the determination of correct migration times of some AMPs peaks that were distorted by electromigration dispersion. The measured effective mobilities were corrected to 25°C. Mixed acidity constants, , and actual ionic mobilities, m_i, of AMPs were determined by the nonlinear regression analysis of pH dependence of their effective mobilities. The values were recalculated to thermodynamic pK_as using the Debye–Hückel theory. Thermodynamic pK_a of imidazolium group of histidine residues was found to be in the range 3.72–4.98, pK_a of α‐NH₃⁺ group was in the range 6.14–6.93, and pK_a of ε‐NH₃⁺ group of lysine spanned the interval 7.26–9.84, depending on the particular amino acid sequence of the AMPs. Actual ionic mobilities of AMPs with positive charges from one to six elementary units achieved values (9.8 – 36.5) × 10^?9 m²V^?1s^?1.