Bis(cyclopentadienyl)titanium complexes of naphthalene-1,8-dithiolates, biphenyl 2,2'-dithiolates, and related ligands

Titanocene 1,8-dithiolato-naphthalene and titanocene 2,2'-dithiolato biphenyl are produced by the reaction of naphtho[1,8-cd]-1,2-dithiole [or the biphenyl] with titanocene dicarbonyl (Ti(II)) in toluene at room temperature. The pro-ligands 2,7-di(tert-butyl)naphtho[1,8-cd]-1,2-dithiole, 5,6-dihydroacenaphtho[5,6-cd]-1,2-dithiole, 4,5-dithioacephenanthrylene, and 13,14-dithiapicene have been used in similar reactions with titanocene dicarbonyl to investigate the effect of steric bulk and of varying the naphthalene backbone on the final complex. The resulting Cp(2)TiS(2)Ar complexes (Ar = naphthalene) have been shown by temperature-dependent (1)H NMR spectroscopy to exist in solution in an envelope conformation with the six-membered TiS(2)C(3) rings undergoing inversion on the NMR time scale while the similar Cp(2)TiS(2)Ar complexes (Ar = biphenyl, binaphthalene) interconvert more rapidly. Titanocene 2,2'-disulfinato biphenyl has been synthesized by the salt elimination reaction of titanocene dichloride (Ti(IV)) and the disodium salt of biphenyl 2,2'-disulfinic acid. Finally, the effect of using pro-ligands where the sulfur atoms have been mono- or di-oxidized has been studied, and an interesting oxygen elimination reaction is observed for the S=O fragments but not for the SO(2) groups. All complexes have been characterized spectroscopically and seven X-ray structures are reported.     

Experimental and theoretical study of the hyperfine structure in the (5d+6s)96p configurations of Pt I

The hyperfine structure of the odd configurations 5d ⁹6p and 5d ⁸6s6p was studied with laser optogalvanic spectroscopy and high resolution interferometry in a platinum hollow cathode. A parametric hyperfine structure analysis for the configurations (5d+6s)⁹6p with 10 excited odd-parity levels was performed for¹⁹⁵Pt. We obtained one-electron hfs parameters,a _5d ⁰¹ =1160(320) MHz,a _6s ¹⁰ =35600(5300) MHz anda _6p ⁰¹ =1300(780) MHz for the configuration 5d ⁸6s6p. The corresponding $\left\langle {r^{ - 3} } \right\rangle _{nl}^{k_s k_l } $ values are compared with those known for other 5d-elements.     

Synthesis of enantiomerically pure (purin-6-yl)phenylalanines and their nucleosides, a novel type of purine-amino acid conjugates

[Chemical reaction: See text] Enantiomerically or diastereomerically pure 4-(purin-6-yl)phenylalanines, a novel type of stable amino acid-purine conjugates, were synthesized by palladium-catalyzed cross-coupling reactions of protected 4-boronophenylalanines or 4-(trimethylstanyl)phenylalanines with diverse 6-halopurines (9-benzyl-6-halopurines and 9-(tetrahydropyran-2-yl)-6-halopurines as well as acyl- and silyl-protected 6-halopurine ribonucleosides and 2-deoxyribonucleosides). Free purine bases and nucleosides bearing (S)- or (R)-phenylalanine in position 6 were obtained after complete deprotection of the products of cross-coupling reactions. Reactivity trends for both of these cross-coupling and deprotection protocols have been compared in terms of practicability, efficiency, and stereoselectivity.     

Advanced statistical evaluation of the complex formation constants from electrophoretic data II: Diastereomeric ion-pairs of (R,S)-N-(3,5-dinitrobenzoyl)leucine and tert-butylcarbamoylquinine

Intermolecular association and ion-pair formation, respectively, between a cationic chiral selector, viz. o-9-(tert-butylcarbamoyl) quinine (CQN), and the both enantiomers of anionic N-(3,5-dinitrobenzoyl)leucine, (R)-DNB-Leu and (S)-DNB-Leu, were investigated by affinity capillary electrophoresis (ACE). Thus, binding constants of the both diastereomeric ion-pairs, (R) and (S)-DNB-Leu/CQN associates, were determined by different experimental setups and correction of nonlinear effects. A reciprocal setup was employed for the high-affinity (S)-enantiomer, and the experimental mobility data obtained for CQN at variable (S)-DNB-Leu concentrations in the background electrolyte were linearized and evaluated by advanced statistical model. A binding constant of K_S=125.1 l mol⁻¹ was afforded. The constant for the (R)-enantiomer, which is outside the range suitable for direct affinity CE, was obtained from indirect affinity CE utilizing the separation of the DNB-Leu racemate at a single appropriate CQN concentration in the BGE (resolution method) taking advantage of the known constant for the (S)-enantiomer yielding a binding constant of K_R=2.51 l mol⁻¹. Thereby, the so-called “constant time method” was adopted for the required precise measurement of the effective mobilities of the both enantiomers. A combined approach of reciprocal affinity CE with racemic DNB-Leu as additive and the resolution method confirmed the results. The resulting constants evidence excellent enantioselectivity of the tert-butylcarbamoyl derivative of the cinchona alkaloid quinine as chiral selector for N-(3,5-dinitrobenzoyl) derivatives of amino acids.     

Biocompatible hydrogels based on chitosan,cellulose/starch,PVA and PEDOT:PSS with high flexibility and high mechanical strength

Fabricating mechanically strong hydrogels that can withstand the conditions in internal tissues is a challenging task. We have designed hydrogels based on multicomponent systems by combining chitosan, starch/cellulose, PVA, and PEDOT:PSS via one-pot synthesis. The starch-based hydrogels were homogeneous, while the cellulose-based hydrogels showed the presence of cellulose micro- and nanofibers. The cellulose-based hydrogels demonstrated a swelling ratio between 121 and 156%, while the starch-based hydrogels showed higher values, from 234 to 280%. Tensile tests indicated that the presence of starch in the hydrogels provided high flexibility (strain at break?>?300%), while combination with cellulose led to the formation of stiffer hydrogels (elastic moduli 3.9–6.6 MPa). The ultimate tensile strength for both types of hydrogels was similar (2.8–3.9 MPa). The adhesion and growth of human osteoblast-like SAOS-2 cells was higher on hydrogels with cellulose than on hydrogels with starch, and was higher on hydrogels with PEDOT:PSS than on hydrogels without this polymer. The metabolic activity of cells cultivated for 3 days in the hydrogel infusions indicated that no acutely toxic compounds were released. This is promising for further possible applications of these hydrogels in tissue engineering or in wound dressings.

Graphical abstract

     

Application of a contactless conductometric detector for the simultaneous determination of small anions and cations by capillary electrophoresis with dual-opposite end injection

A contactless conductometric detection (CCD) system for capillary electrophoresis (CE) with a flexible detection cell was applied for the simultaneous determination of small anions and/or cations in rain, surface and drainage water samples. The applied frequency, the amplitude of the input signal, the electrolyte conductivity and electrode distance were found to be the most significant factors affecting the detection sensitivity. 2-(N-Morpholino)ethanesulfonic acid/histidine-based (MES/His) electrolytes were used for direct conductivity detection of anions and cations, while ammonium acetate was selected for indirect conductivity determination of alkylammonium salts. For the simultaneous separation procedure, involving dual-opposite end injection, an electrolyte consisting of 20 mM MES/His, 1.5 mM 18-crown-6 and 20 microM cetyltrimethylammonium bromide provided baseline separation of 13 anions and cations in less than 6 min. The detection limits achieved were 7-30 micrograms/l for direct conductometric detection of various common inorganic cations and anions, excluding F- (62 micrograms/l) and H2PO4- (250 micrograms/l), and 35-178 micrograms/l for indirect conductometric detection of alkyl ammonium cations. The developed electrophoretic method with conductometric detection was compared to ion chromatography.     

A Study of PbTiO3 Crystallization in Pure and Composite Nanopowders Prepared by the Sol-Gel Technique

Summary.  In this investigation the crystallization of PbTiO₃ upon annealing of pure nanopowders and PbTiO₃–SiO₂ (1:1 v/v) nanocomposite powders prepared by the sol-gel technique was studied. Using X-ray diffraction phase analysis, the start of PbTiO₃ crystallization in pure PbTiO₃ powders was detected at 400°C. Distinct crystallization of PbTiO₃ in PbTiO₃–SiO₂ nanocomposites starts at 700°C, whereas SiO₂ remains amorphous. There are indications that an interface interaction between the PbTiO₃ and the SiO₂ phase plays an important role in hindering the crystallization of PbTiO₃. The particle size (size of coherently scattering regions) was estimated from the broadening of the X-ray diffraction line profiles. The average size of PbTiO₃ nanocrystallites increases with temperature and time of annealing, the influence of temperature being more significant than that of the annealing time. Differential scanning calorimetry confirmed the results of the X-ray diffraction with respect to the start of the crystallization. Laser beam scattering and scanning electron microscopy provided the statistical distribution of the grain size and the morphology of the powder grains, showing that each grain of the powders contains several nanocrystallites (coherently scattering regions). Received October 4, 2001. Accepted (revised) December 14, 2001     

Artificial neural network modification of simulation-based fitting: application to a protein-lipid system

Simulation-based fitting has been applied to data analysis and parameter determination of complex experimental systems in many areas of chemistry and biophysics. However, this method is limited because of the time costs of the calculations. In this paper it is proposed to approximate and substitute a simulation model by an artificial neural network during the fitting procedure. Such a substitution significantly speeds up the parameter determination. This approach is tested on a model of fluorescence resonance energy transfer (FRET) within a system of site-directed fluorescence labeled M13 major coat protein mutants incorporated into a lipid bilayer. It is demonstrated that in our case the application of a trained artificial neural network for the substitution of the simulation model results in a significant gain in computing time by a factor of 5 x 10(4). Moreover, an artificial neural network produces a smooth approximation of the noisy results of a stochastic simulation.     

Metal complexes of a biconcave porphyrin with D4-structure--versatile chiral shift agents

Representative metal complexes of a biconcave D4-symmetric porphyrin were synthesised by metalion insertion into the porphyrin ligand 1. The NMR spectra suggested D4-symmetry for the ZnII and dioxo-RuVI complexes of 1 and C4-symmetry for the unsymmetrically ligated RuII and RhIII complexes. Metal complexes of 1 proved to be versatile chiral 1H NMR shift agents for a broad spectrum of organic amines, alcohols, carboxylic acids, esters, nitriles and nonpolar fullerene derivatives. A practical analysis of chiral substrates with 1 covers enantiomeric excesses beyond 99%. An X-ray structure of (1:1)-cocrystals of an achiral, biconcave CoII porphyrinate and C60 provided the first detailed insights into the structure of such a biconcave metallo-porphyrinate. It also showed remarkable packing of the carbon sphere against the main concave units of the porphyrin and gave clues about the relevant interactions between biconcave porphyrins and fullerenes.     

Determination of radiation yields of ionogenic products of two-phase water-tributylphosphate and water-di-(2-ethylhexyl)-phosphoric acid systems by capillary isotachophoresis

It was found that the main ionogenic radiolytical degradation products of tributylphosphate were monobutylphosphate dibutylphosphate, phosphoric acid, formic, acetic, propionic and butyric acids as the result of gamma-irradiation of two-phase water-tributylphosphate system. In the case of irradiation of two-phase water-di(2-ethylhexyl)-phosphoric acid system, the main radiolytic degradation products are 2-ethylhexylphosphoric acid and phosphoric acid. All products were determined using isotachophoresis. According two-phase theory the total and partial radiation yields of products were calculated from the results.Dedicated to 65th birthday of prof. L. T. Bugaenko