The immunosensors for measurement of 2,4-dichlorophenoxyacetic acid based on electrochemical impedance spectroscopy

Electrochemical impedance spectroscopy (EIS) was evaluated for the direct determination of herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Specific antibody against 2,4-D was immobilised onto different gold electrodes. Several methods of antibody immobilisation by covalent linkage to modified surface were studied. Self-assembled monolayers formed using thiocompounds as cystamine, 4-aminothiophenol (ATPh), 3,3'-dithiopropionic acid di-(N-succinimidyl ester) (DTSP) and 11-mercaptoundecanoic acid (MUA) were chosen for the sensing surface activation. Three different sensor types were tested: screen-printed disc and finger-like structures and interdigitated array (IDA) electrodes produced by lithography. The measurements were carried out in a stationary arrangement, and the reaction between hapten and the immobilised antibody was observed online. Changes of impedance parameters were evaluated, and the best immobilisation technique (using 4-aminothiophenol) was chosen for further measurements. Impedance changes due to immunocomplex formation were evaluated, and the possibility of direct monitoring of 2,4-D binding to the antibody was demonstrated at a fixed frequency. For the strip sensor, the calibration curves were constructed in concentration range from 45 nmol l(-1) to 0.45 mmol l(-1) of 2,4-D.     

A top-down approach to protein structure studies using chemical cross-linking and Fourier transform mass spectrometry

In a preliminary communication we described a top-down approach to the determination of chemical cross-link location in proteins using Fourier transform mass spectrometry (FT-MS). We have since extended the approach to use a series of homobifunctional cross-linkers with the same reactive functional groups, but different cross-linker arm lengths. Correlating cross-linking data across a series of related linkers allows the distance constraint derived from a cross-link between two reactive side chains to be determined more accurately and increases the confidence in the assignment of the cross-links. In ubiquitin, there are seven lysines with primary amino groups and the amino terminus. Disuccinimidyl suberate (DSS, cross-linker arm length = 11.4 A), disuccinimidyl glutarate (DSG, cross-linker arm length = 7.5 A) and disuccinimidyl tartrate (DST, cross- linker arm length = 5.8 A) are homobifunctional cross-linking reagents that react specifically with primary amines. Using tandem mass spectrometry (MS/MS) on the singly, internally cross-linked precursor ion of ubiquitin, we found cross-links with DSS and DSG between the amino terminus and Lys 6, between Lys 6 and Lys 11, and between Lys 63 and Lys 48. Using disuccinimidyl tartrate (DST), the shortest cross-linker in the series, only the cross-links between the amino terminus and Lys 6, and between Lys 6 and Lys 11 were observed. The observed cross-links are consistent with the crystal structure of ubiquitin, if the lysine side chains and the amino terminus are assumed to have considerable flexibility. In a separate study, we probed the reactivity of the primary amino groups in ubiquitin using the amino acetylating reagent, N-hydroxy succinimidyl acetate (NHSAc), and a top-down approach to localize the acetylated lysine residues. The reactivity order obtained in that study (M1 approximate, equals K6 approximate, equals K48 approximate, equals K63) > K33 > K11 > (K27, K29), shows that the cross-link first formed in ubiquitin by reaction with DSS and DSG occurs between the most reactive residues.     

Rhodium(I) complexes with 1′-(diphenylphosphino)ferrocenecarboxylic acid as active and recyclable catalysts for 1-hexene hydroformylation

The rhodium complex trans-[Rh(CO)(Hdpf-κP)(dpf-κ²O,P)] (1), (Hdpf = 1′-(diphenylphosphino)ferrocenecarboxylic acid) was used as an efficient and recyclable catalyst for 1-hexene hydroformylation producing ca. 80% of aldehydes at 10 atm CO/H₂ and 80 °C. After the reaction, unchanged complex 1 was separated from the reaction mixture and used again three times with the same catalytic activity. The effect of modifying ligands, phosphines and phosphites, on the reactivity of 1 was investigated. The active catalytic systems containing 1 or trans-[Rh(CO)(L)(dpf-κ²O,P)] (2) were formed in situ from acetylacetonato rhodium(I) precursors [Rh(CO)₂(acac)] (3) or [RhL(CO)(acac)] (4) and Hdpf or Medpf (L = phosphine, Medpf = methyl ester of Hdpf).     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.     

A comparison of performance of various analytical columns in pharmaceutical analysis: conventional C18 and high throughput C18 zorbax columns

New improved types of analytical columns Zorbax Eclipse XDB-C18 (75 mm x 4.6 mm i.d., 3.5 microm) and Zorbax Eclipse XDB-C18 (50 mm x 4.6 mm i.d., 1.8 microm) have been tested for determination of estradiol (active substance), methylparaben, propylparaben (preservatives) and estrone (degradation product) and compared with the conventional C18 columns (250 mm x 3.0 mm i.d., 5.0 microm). The Zorbax columns differ with their particle size, column length and ODS (octadecylsilica) type as well. Higher flow-rates (up to about 2.5 ml min(-1)) could be applied regardless to back-pressure. The analysis - previously done at 40 degrees C - could be performed even at ambient temperature. Analytical run was shortened to 3.5 min (from 12 min used for the conventional C18 column) with the same or better retention characteristics. System suitability data for all Zorbax columns show the advantages of these columns for the practical use in routine quality control of pharmaceuticals, particularly from the point of view of speed of analysis and solvent consumption.     

Ruthenium(II) complexes with ferrocene-modified arene ligands: synthesis and electrochemistry

A series of arene-ruthenium complexes of the general formula [RuCl₂{η⁶-C₆H₅(CH₂)₂R}L] with R=OH, CH₂OH, OC(O)Fc, CH₂OC(O)Fc (Fc=ferrocenyl) and L=PPh₃, (diphenylphosphino)ferrocene, or bridging 1,1^′-bis(diphenylphosphino)ferrocene, have been synthesized. Two synthetic pathways have been used for these ferrocene-modified arene-ruthenium complexes: (a) esterification of ferrocene carboxylic acid with 2-(cyclohexa-1,4-dienyl)ethanol, followed by condensation with RuCl₃ · nH₂O to afford [RuCl₂{η⁶-C₆H₅(CH₂)₂OC(O)Fc}]₂, and (b) esterification between ferrocene carboxylic acid and [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}L] to give [RuCl₂{η⁶-C₆H₅(CH₂)₃OC(O)Fc}L]. All new compounds have been characterized by NMR and IR spectroscopy as well as by mass spectrometry. The single-crystal X-ray structure analysis of [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] shows that the presence of a CH₂CH₂CH₂OH side-arm allows [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] to form an intramolecular hydrogen bond with a chlorine atom. The electrochemical behavior of selected representative compounds has been studied. Complexes with ferrocenylated side arms display the expected cyclic voltammograms, two independent reversible one-electron waves of the Ru(II)/Ru(III) and Fe(II)/Fe(III) redox couples. Introduction of a ferrocenylphosphine onto the ruthenium is reflected by an additonal reversible, one-electron wave due to ferrocene/ferrocenium system which is, however, coupled with the Ru(II)/Ru(III) redox system.     

Capillary ion chromatography

This review summarizes progress in capillary ion chromatography. Theoretical aspects and practical limitations of packed and open tubular capillary columns are considered. Applications of packed and open tubular capillary IC are described. Emerging technologies such chip-scale IC and the use of monolithic columns are discussed.     

Utilization of cleavage of the [1]benzofuro[2,3‐e][1,2,4]triazine ring for the synthesis of oxygen,nitrogen and sulfur derivatives of [1,2,4]triazine

A series of 6‐azacytosines 4a‐4k and 5a‐5c were prepared by nucleophilic cleavage of furan ring of [1]benzofuro[2,3‐e][1,2,4]triazine derivative 1 . Some of them were used for the preparation of derivatives of [1,2,4]triazolo[4,3‐d][1,2,4]triazine ( 6a‐6d ) and tetrazolo[1,5‐d][1,2,4]triazine (7). The reaction of 1 with hydrogen sulfide afforded the corresponding 6‐(2‐hydroxyphenyl)‐2‐phenyl‐5‐thioxo‐4,5‐dihydro‐1,2,4‐tri‐azin‐3(2H)‐one ( 8 ), while with hydrogen selenide 6‐(2‐hydroxyphenyl)‐2‐phenyl‐4,5‐dihydro‐1,2,4‐triazin‐3(2H)‐one ( 9 ) was formed. The prepared compounds were tested for biological activity.     

The synthesis of 4‐amino‐3‐(2‐pyridyl)pyrazolo[5,1‐c][1,2,4]triazine and some of its derivatives

A mixture of both geometrical isomers of hydrazones 3a‐3e was obtained by the coupling reactions of pyrazole‐3‐diazonium salts 2a‐2d and benzenediazonium chloride 2e with 2‐pyridylacetonitrile 1 . Hydrazones 3a‐3d were cyclized to the corresponding 4‐amino‐3‐(2‐pyridyl)pyrazolo[5,1‐c][1,2,4]triazines 4a‐4d.     

Bis(cyclopentadienyl)titanium complexes of naphthalene-1,8-dithiolates, biphenyl 2,2'-dithiolates, and related ligands

Titanocene 1,8-dithiolato-naphthalene and titanocene 2,2'-dithiolato biphenyl are produced by the reaction of naphtho[1,8-cd]-1,2-dithiole [or the biphenyl] with titanocene dicarbonyl (Ti(II)) in toluene at room temperature. The pro-ligands 2,7-di(tert-butyl)naphtho[1,8-cd]-1,2-dithiole, 5,6-dihydroacenaphtho[5,6-cd]-1,2-dithiole, 4,5-dithioacephenanthrylene, and 13,14-dithiapicene have been used in similar reactions with titanocene dicarbonyl to investigate the effect of steric bulk and of varying the naphthalene backbone on the final complex. The resulting Cp(2)TiS(2)Ar complexes (Ar = naphthalene) have been shown by temperature-dependent (1)H NMR spectroscopy to exist in solution in an envelope conformation with the six-membered TiS(2)C(3) rings undergoing inversion on the NMR time scale while the similar Cp(2)TiS(2)Ar complexes (Ar = biphenyl, binaphthalene) interconvert more rapidly. Titanocene 2,2'-disulfinato biphenyl has been synthesized by the salt elimination reaction of titanocene dichloride (Ti(IV)) and the disodium salt of biphenyl 2,2'-disulfinic acid. Finally, the effect of using pro-ligands where the sulfur atoms have been mono- or di-oxidized has been studied, and an interesting oxygen elimination reaction is observed for the S=O fragments but not for the SO(2) groups. All complexes have been characterized spectroscopically and seven X-ray structures are reported.