[Sm(NO3)3(TPTZ)(H2O)]·2H2O [TPTZ is 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]

The title compound, aqua­tris­(nitrato)[2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine]samarium dihydrate, [Sm(NO₃)₃­(C₁₈H₁₂N₆)­(H₂O)]·­2H₂O, was prepared from Sm(NO₃)₃·6H₂O and 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine. The metal atom is ten‐coordinate being bonded to the terdentate TPTZ ligand, three bidentate nitrates and a water mol­ecule.     

Selbstorganisation von Chinodimethanen über kovalente Bindungen,Mitteilung III,Untersuchungen zur Herstellung von Nanostrukturen

Self‐Assembly of Quinodimethanes through Covalent Bonds. Part III. Investigations on the Preparation of Nanostructures As part of our studies on the tetramerization of quinodimethane 1 to the macrocyclic compound 2 , the influence of substituents on this reaction was investigated. It was found that a large range of substituents such as 2‐phenylethyl, 2‐(4‐methoxyphenyl)ethyl, 2‐(4‐fluorophenyl)ethyl, 2‐[4‐(tert‐butyl)phenyl]ethyl, and 2‐[4‐(2‐phenylethyl)phenyl]ethyl, attached at positions 2 and 7 of 9H‐fluorene, do not prevent the tetramerization. The key step in the formation of the macrocylic compounds 13a – e is the debromination of 12a – e with mercury to the corresponding quinodimethanes which undergo a self‐assembly forming 13a – e in high yields. To study the conjugative influence of substituents on tetramerization, the effect of the hex‐1‐ynyl groups at positions 3 and 6 of the 9H‐fluorene rings was investigated. In this case, the corresponding macrocycle 17 was generated by the reaction of diol 16a with SnCl₂. Although the expected tetramerization to 17 occurred, the yield was lower than in the case of 13a – e , due to the sensitivity of the product.     

Transport properties and microstructure changes of alumina coatings characterized by emanation thermal analysis

Emanation thermal analysis was used to characterize the thermal behaviour of alumina coatings as deposited on EUROFER 97 steel surface by filtered vacuum arc technique. Temperature ranges of the healing of cracks and structure irregularities observed by SEM were determined from the ETA results. Transport properties of the alumina coatings were assessed from the ETA results by the evaluation of radon diffusion parameters in the temperature range from 50 to 300°C. Healing microstructure irregularities of the alumina coatings can be expected in the range 300–700°C as indicated by the decrease of the radon release rate. From the ETA results it followed that the onset of healing the cracks observed by the SEM on the surface of one alumina coating sample can be expected at 430°C. Dedicated to Dr. K. Habersberger, Past-Chairman of the thermal analysis working group of the Czech Chemcial Society, at the occasion of his 75^th birthday     

Carboxyl groups in pre-treated regenerated cellulose fibres

The influence of peroxide bleaching and slack-mercerization on the amount of acidic groups in regenerated fibres (viscose, modal and lyocell) were studied. Conductometric titration was used to determine the total content of acidic carboxylic groups. Polyelectrolyte titration was used for surface and total charge determination, and to obtain information about the charge distribution and accessibilities of charged groups. Changes in fibre crystallinity to pre-treatment processes were characterized using iodine sorption (Schwertassek method) and correlated to treatments and the amount of carboxylic groups. For all three types of fibres the amount of accessible carboxyl groups was lowered by an increase in the degree of crystallinity. Bleaching with hydrogen peroxide causes some oxidative cellulose damage and, therefore, a larger amount of carboxyl groups (presumably formed at the end of cellulose chains). Slack-mercerization did not significantly change the total amount of acidic groups in the fibres, but their accessibility to cationic polyelectrolytes, in particular to polymers with high molecular weight was substantially lowered. Lidija Fras Zemljič, Zdenka Peršin, and Karin Stana Kleinschek are the members of the European Polysaccharide Network of Excellence (EPNOE).     

Hydroxyproline quantification for the estimation of collagen in tissue using multiple reaction monitoring mass spectrometry

Collagens are highly abundant mammalian proteins that contain a high content of hydroxylated amino acids such as hydroxyproline. We have exploited the high hydroxyproline content of collagen and developed a method for hydroxyproline quantification as a measure of collagen content in muscle samples. The novel method utilizes a highly selective and sensitive method of multiple reaction monitoring (MRM) by mass spectrometry. The analytical method is simple, rapid (5min), convenient (no derivatization), precise (<17% RSD), accurate (90-108%), sensitive (4.88nmol/L) and linear (R(2)>0.999) over three orders of magnitude (5-5000nmol/L).     

Molybdenum and tungsten structural differences are dependent on ndz(2)/(n + 1)s mixing: comparisons of (silox)3MX/R (M = Mo, W; silox = (t)Bu3SiO)

Treatment of trans-(Et 2O) 2MoCl 4 with 2 or 3 equiv of Na(silox) (i.e., NaOSi (t) Bu 3) afforded (silox) 3MoCl 2 ( 1-Mo) or (silox) 3MoCl ( 2-Mo). Purification of 2-Mo was accomplished via addition of PMe 3 to precipitate (silox) 3ClMoPMe 3 ( 2-MoPMe 3), followed by thermolysis to remove phosphine. Use of MoCl 3(THF) 3 with various amounts of Na(silox) produced (silox) 2ClMoMoCl(silox) 2 ( 3-Mo). Alkylation of 2-Mo with MeMgBr or EtMgBr afforded (silox) 3MoR (R = Me, 2-MoMe; Et, 2-MoEt). 2-MoEt was also synthesized from C 2H 4 and (silox) 3MoH, which was prepared from 2-Mo and NaBEt 3H. Thermolysis of WCl 6 with HOSi ( t )Bu 3 afforded (silox) 2WCl 4 ( 4-W), and sequential treatment of 4-W with Na/Hg and Na(silox) provided (silox) 3WCl 2 ( 1-W, tbp, X-ray), which was alternatively prepared from trans-(Et 2S) 2WCl 4 and 3 equiv of Tl(silox). Na/Hg reduction of 1-W generated (silox) 3WCl ( 2-W). Alkylation of 2-W with MeMgBr produced (silox) 3WMe ( 2-WMe), which dehydrogenated to (silox) 3WCH ( 6-W) with Delta H (double dagger) = 14.9(9) kcal/mol and Delta S (double dagger) = -26(2) eu. Magnetism and structural studies revealed that 2-Mo and 2-MoEt have triplet ground states (GS) and distorted trigonal monopyramid (tmp) and tmp structures, respectively. In contrast, 2-W and 2-WMe possess squashed-T d (distorted square planar) structures, and the former has a singlet GS. Quantum mechanics/molecular mechanics studies of the S = 0 and S = 1 states for full models of 2-Mo, 2-MoEt, 2-W, and 2-WMe corroborate the experimental findings and are consistent with the greater nd z (2) /( n + 1)s mixing in the third-row transition-metal species being the dominant feature in determining the structural disparity between molybdenum and tungsten.     

Utilization of optimized BCR three-step sequential and dilute HCl single extraction procedures for soil-plant metal transfer predictions in contaminated lands

The prediction of soil metal phytoavailability using the chemical extractions is a conventional approach routinely used in soil testing. The adequacy of such soil tests for this purpose is commonly assessed through a comparison of extraction results with metal contents in relevant plants. In this work, the fractions of selected risk metals (Al, As, Cd, Cu, Fe, Mn, Ni, Pb, Zn) that can be taken up by various plants were obtained by optimized BCR (Community Bureau of Reference) three-step sequential extraction procedure (SEP) and by single 0.5 mol L(-1) HCl extraction. These procedures were validated using five soil and sediment reference materials (SRM 2710, SRM 2711, CRM 483, CRM 701, SRM RTH 912) and applied to significantly different acidified soils for the fractionation of studied metals. The new indicative values of Al, Cd, Cu, Fe, Mn, P, Pb and Zn fractional concentrations for these reference materials were obtained by the dilute HCl single extraction. The influence of various soil genesis, content of essential elements (Ca, Mg, K, P) and different anthropogenic sources of acidification on extraction yields of individual risk metal fractions was investigated. The concentrations of studied elements were determined by atomic spectrometry methods (flame, graphite furnace and hydride generation atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry). It can be concluded that the data of extraction yields from first BCR SEP acid extractable step and soil-plant transfer coefficients can be applied to the prediction of qualitative mobility of selected risk metals in different soil systems.     

Thermal decomposition of trimethylgallium Ga(CH3)3: a shock-tube study and first-principles calculations

The thermal decomposition of Ga(CH3)3 has been studied both experimentally in shock-heated gases and theoretically within an ab-initio framework. Experiments for pressures ranging from 0.3 to 4 bar were performed in a shock tube equipped with atomic resonance absorption spectroscopy (ARAS) for Ga atoms at 403.3 nm. Time-resolved measurements of Ga atom concentrations were conducted behind incident waves as well as behind reflected shock waves at temperatures between 1210 and 1630 K. The temporal variation in Ga-atom concentration was described by a reaction mechanism involving the successive abstraction of methyl radicals from Ga(CH3)3 (R1), Ga(CH3)2 (R2), and GaCH3 (R3), respectively, where the last reaction is the rate-limiting step leading to Ga-atom formation. The rate constant of this reaction (R3) was deduced from a simulation of the measured Ga-atom concentration profiles using thermochemical data from ab-initio calculations for the reactions R1 and R2 as input. The Rice-Ramsperger-Kassel-Marcus (RRKM) method including variational transition state theory was applied for reaction R3 assuming a loose transition state. Structural parameters and vibrational frequencies of the reactant and transition state required for the RRKM calculations were obtained from first-principles simulations. The energy barrier E3(0) of reaction R3, which is the most sensitive parameter in the calculation, was adjusted until the RRKM rate constant matched the experimental one and was found to be E(0) = 288 kJ/mol. This value is in a good agreement with the corresponding ab-initio value of 266 kJ/mol. The rate constant of reaction R3 was found to be k 3/(cm(3) mol(-1)s(-1)) = 2.34 x 10(11) exp[-23330(K/ T)].     

The neomycin biosynthetic gene cluster of Streptomyces fradiae NCIMB 8233: genetic and biochemical evidence for the roles of two glycosyltransferases and a deacetylase

An efficient protocol has been developed for the genetic manipulation of Streptomyces fradiae NCIMB 8233, which produces the 2-deoxystreptamine (2-DOS)-containing aminoglycoside antibiotic neomycin. This has allowed the in vivo analysis of the respective roles of the glycosyltransferases Neo8 and Neo15, and of the deacetylase Neo16 in neomycin biosynthesis. Specific deletion of each of the neo8, neo15 and neo16 genes confirmed that they are all essential for neomycin biosynthesis. The pattern of metabolites produced by feeding putative pathway intermediates to these mutants provided unambiguous support for a scheme in which Neo8 and Neo15, whose three-dimensional structures are predicted to be highly similar, have distinct roles: Neo8 catalyses transfer of N-acetylglucosamine to 2-DOS early in the pathway, while Neo15 catalyses transfer of the same aminosugar to ribostamycin later in the pathway. The in vitro substrate specificity of Neo15, purified from recombinant Escherichia coli, was fully consistent with these findings. The in vitro activity of Neo16, the only deacetylase so far recognised in the neo gene cluster, showed that it is capable of acting in tandem with both Neo8 and Neo15 as previously proposed. However, the deacetylation of N-acetylglucosaminylribostamycin was still observed in a strain deleted of the neo16 gene and fed with suitable pathway precursors, providing evidence for the existence of a second enzyme in S. fradiae with this activity.