Phenomena Affecting the Equilibrium of Al(III) and Zn(II) Extraction with Winsor II Microemulsions

The extraction of Al(III) and Zn(II) from an aqueous solution with two water-in-oil microemulsions, one containing di(2-ethylhexyl)phosphoric acid (DEHPA), was investigated to aid the understanding of the role of the extractant and the metal specific characteristics in the mechanism of microemulsion extraction. The extraction of Al with the DEHPA microemulsion increased by a factor of about 10 with respect to that in the conventional DEHPA system, whereas the extraction of Zn was lower than that in the single DEHPA system. Extraction with the DEHPA-free microemulsion was very low, showing that metal ion solubilization was not important in the mechanism of microemulsion extraction. It is proposed that the effect of the mixed microemulsion on the metal distribution coefficient is the result of the balance between a decrease in the complexation reaction yield due to the interaction between butanol and DEHPA, and the adsorption of the metal complex at the macro- and microinterfaces. The former leads to a decrease in Zn(II) extraction and the latter to Al(III) extraction synergism. Copyright 2000 Academic Press.     

Adsorption of barium and calcium chloride onto negatively charged alpha-Fe(2)O(3) particles

Adsorption of cations (Na(+), Ca(2+), Ba(2+)) onto negatively charged (pH 10.4) hematite (alpha-Fe(2)O(3)) particles has been studied. The oxide material was carefully prepared in order to obtain monodisperse suspensions of well-crystallized, quasi-spherical particles (50 nm in diameter). The isoelectric point (IEP) is located at pH 8.5. Adsorption of barium ions onto oxide particles was carried out and the electrophoretic mobility was measured throughout the adsorption experiment. Comparison with calcium adsorption at full coverage reveals a higher uptake of Ba(2+). In both cases it shows also that chloride ions coadsorb with M(2) ions. Simultaneous uptake of the positive and negative ions explains why the electrophoretic mobility does not reverse to cationic migration. A theoretical study of the surface speciation has been carried out, using the MuSiC model. It reveals the presence of negative as well as positive sites on both sides of the point of zero charge (PZC) of the hematite particles, which may explain the coadsorption of Ba(2+) and Cl(-) at pH 10.4. The effective charge of the oxide particles, calculated from the electrophoretic mobility, is in very good agreement with the results found with the MuSiC modelization and the chloride/barium adsorption ratio. It also verifies the theory of ionic condensation. Calorimetric measurements gave a negative heat for the overall reaction occurring when Ba(2+)/Cl(-) ions adsorb onto hematite. Despite the fact that anions (Cl(-) and OH(-)) adsorption onto mineral oxides is an exothermic phenomenon, it is likely that barium and calcium adsorption is endothermic, denoting the formation of an inner-sphere complex as reported in the literature.     

Determination of fat-soluble vitamins in yogurt by HPLC with electrochemical detection

A method employing HPLC with electrochemical detection for the rapid and simultaneous determination of vitamins A, D(3) and E is described. The method uses a C-18 reverse phase column and 2.5 mM HAcO-NaAcO in methanol-water (99:1, v/v) solution as the mobile phase. The compounds are quantified using amperometric detection with a glassy carbon electrode at a potential of + 1300 mV (vs. Ag/AgCl) and the results are compared with those obtained using UV detection at a wavelength of 280 nm. The method was successfully applied to the analysis of vitamins A, D(3) and E in yogurt samples. After saponification, fat-soluble vitamins were extracted and the methanolic solution of the extracts was injected directly into the chromatographic system, avoiding the clean-up step which is necessary when no electrochemical detection is used. Good recovery percentages were obtained.     

Polarographic determination of glycine with a dropping copper amalgam electrode

The anodic oxidation of a dropping copper amalgam electrode in presence of dilute solutions of glycine in 0.50 M NaClO₄ has been studied. An anodic wave at ?0.28V (SCE) is observed, yielded by diffusion of glycinate anion in the solution towards the electrode surface. The wave-heights increase with the glycinate concentration (function of glycine concentration and pH value) until the anodic oxidation is controlled by the metal diffusion into mercury. The effect of pH is interpreted by attributing it to the depolarizer effects at glycinate anion even though the zwitterion is present in much larger concentrations. The applicability of anodic oxidation of a dropping copper amalgam electrode in the determination of glycine in the range of concentrations 10^?4–10^?2M with a rigorous control of pH (8.0<pH<10.5) is shown. The standard deviation of the proposed method is 4.1% and the minimum concentration determinable is in the 1×10^?4M range.     

Radical amination with sulfonyl azides: a powerful method for the formation of C-N bonds

A novel reaction for the introduction of an azide moiety by means of a mild radical process is currently under development. Sulfonyl azides are suitable azidating agents for nucleophilic radicals, such as secondary and tertiary alkyl radicals. More electrophilic radicals, such as enolate radicals, do not react with sulfonyl azides. This feature allowed the development of efficient intra- and intermolecular carboazidations of olefins. Due to the versatility of the azido group, this reaction has an important synthetic potential, as already demonstrated by the preparation of the core of several alkaloids, particularly those containing an amino-substituted quaternary carbon center, such as FR901483.     

Synthesis of di- and monobromo(ferrocenylvinyl)cyclopropanes

The Wittig olefination of ferrocene-containing chalcones leads to 1,3-dienes and their cyclodimers. The reaction of 1,3-dienes with dibromocarbene yields gem-dibromo(ferrocenylvinyl)cyclopropanes. Upon reductive dehalogenation with ethylmagnesium bromide they afford the corresponding monobromo derivatives. All the obtained compounds were characterized by ¹H and ¹³C NMR, elemental analysis, and mass spectrometry. The structures of compounds 5a,b, 6g, 6h, and 7i were confirmed by X-ray diffraction analysis.     

Analysis of multiple pesticide residues in tobacco using pressurized liquid extraction, automated solid-phase extraction clean-up and gas chromatography-tandem mass spectrometry

A new method was developed for the analysis of pesticide residues in tobacco. The objective was to significantly increase the number of samples that can be processed by the laboratory and to enable the extension of the current coverage to additional pesticides. A new analytical approach was therefore defined based on two main axes, the automation of the sample preparation and the selectivity of the analyte detection using tandem mass spectrometry. This latter aspect reduces the stringency of the requirements placed on the clean-up of the extracts and on the chromatographic resolution when less selective detectors are used. The extraction of the analytes from the matrix is performed using the pressurized liquid extraction technique. Tobacco samples are extracted at elevated temperature and pressure (100 C and 100 atm; 1 atm = 101,325 Pa) using acetone as an extraction solvent. The resulting extract is then concentrated using a Vortex evaporator. Three different solid-phase extraction (SPE) procedures, adjusted to the chemical properties of the different active ingredients to be measured, are applied to the concentrated extract, thus leading to three extract fractions. The first fraction contains such main classes of active ingredients as organohalogenated and 2,6-dinitroaniline compounds while the second one collects the organophosphorus and acylalanines residues; these two fractions are analyzed by capillary gas chromatography coupled to tandem mass spectrometry using negative chemical ionization and electron impact ionization in the positive mode, respectively. The third extract fraction gathers the N-methylcarbamates residues which are analyzed by HPLC with post-column derivatization and fluorescence detection. The different sample preparation stages from extraction to SPE clean-up have been automated through the use of recent analytical technologies. In combination with the analysis by tandem mass spectrometry, this provided a potential for a high sample throughput.     

A synthetic hydroxy acid that shows tubular-shaped structure in solid-state and ionophoric activity in phospholipid bilayers

[formula: see text] In this contribution, we describe the ability of compound (+/-)-1b and six molecules of water to form in solid-state hexameric aggregates, which self-assemble to give hollow tubular structures. Single-crystal X-ray analysis shows that these tubes are open-ended, with irregular shape and internal van der Waals pore diameter between 6 and 9 A. In addition, transmembrane sodium transport activity was also assessed for (+/-)-1b using dynamic Na(+)-NMR technique.     

ON PHOTOREACTIONS OF ANTHRACENE IN SOLID MATRIX—I. PHOTODIMERIZATION

Abstract— The influence of a surrounding transparent matrix on the photochemical behavior of an absorbing solute has been investigated on the particular case of anthracene in KBr , KCl and in HBO₂ and B₂O₃ glasses. In KBr compressed powders, dianthracene formation occurs with a high yield, whereas it is forbidden or negligible for pure crystalline anthracene.
Experiments show that the anthracene molecules are associated in microcrystals and suggest that the dimerization reaction occurs at the interface between KBr and anthracene crystals.
Such an influence of the heterogeneity of the irradiated medium may have implications in photobiology where heterogeneous structures are the general rule.