Volumetric Properties for Binary Mixtures of Nonane + Decane at Temperatures from <Emphasis Type="Italic">T</Emphasis>=283.15 to 353.15 K and at <Emphasis Type="Italic">p</Emphasis>=0.7 atm

Densities of the binary mixture of nonane with decane were measured at temperatures from 283.15 to 353.15 K at atmospheric pressure (0.7 atm). Measurements have been made over the full range of compositions and for the pure compounds by using a vibrating-tube densimeter (VTD). Excess molar volumes have been obtained from these experimental results and were fitted to a Redlich–Kister type expansion. The excess molar volumes exhibit small positive and small negative deviations from ideal behavior in the temperature interval studied. Partial molar volumes and partial molar volumes at infinite dilution have been determined for each component.     

Benzodipyrrole derivates as new ionophores for anion-selective electrodes: improving potentiometric selectivity towards divalent anions

Two open substituted benzodipyrroles were tested as hydrogen-bond-forming anion ionophores for the development of anion-selective electrodes. These compounds were incorporated in plasticized polymeric membranes with different plasticizers, using different membrane compositions to explore their response towards several anions. The electrodes constructed with membranes containing 2-nitrophenyl octyl ether and a 0.5 molar ratio ionic additive/ionophore showed pronounced anti-Hofmeister behaviour, providing a significantly enhanced response towards the divalent anions sulfate, sulfite, thiosulfate and oxalate. The selected electrodes were also evaluated in terms of detection limits and selectivity. ¹H NMR experiments were carried out in an attempt to explain some aspects of the behaviour observed.     

Ethanol Production from Residual Wood Chips of Cellulose Industry: Acid Pretreatment Investigation,Hemicellulosic Hydrolysate Fermentation,and Remaining Solid Fraction Fermentation by SSF Process

Current research indicates the ethanol fuel production from lignocellulosic materials, such as residual wood chips from the cellulose industry, as new emerging technology. This work aimed at evaluating the ethanol production from hemicellulose of eucalyptus chips by diluted acid pretreatment and the subsequent fermentation of the generated hydrolysate by a flocculating strain of Pichia stipitis. The remaining solid fraction generated after pretreatment was subjected to enzymatic hydrolysis, which was carried out simultaneously with glucose fermentation [saccharification and fermentation (SSF) process] using a strain of Saccharomyces cerevisiae. The acid pretreatment was evaluated using a central composite design for sulfuric acid concentration (1.0–4.0 v/v) and solid to liquid ratio (1:2–1:4, grams to milliliter) as independent variables. A maximum xylose concentration of 50 g/L was obtained in the hemicellulosic hydrolysate. The fermentation of hemicellulosic hydrolysate and the SSF process were performed in bioreactors and the final ethanol concentrations of 15.3 g/L and 28.7 g/L were obtained, respectively.     

Application of NMR methods to the study of the interaction of natural products with biomolecular receptors

In this review, we present applications of NMR spectroscopy as a potent tool for the study of molecular interactions. It is clear that a variety of NMR methods may be employed to deduce key features of ligand–receptor molecular recognition processes, looking at the process from the perspective of the receptor or the ligand. We have not provided an exhaustive review, but we have tried to focus on describing the different aspects within this research topic. We have therefore selected examples accordingly, depending on the particular problem under study or the application/development of protocols to circumvent the technical problems that may be found when working in this field.     

Synthetic prodiginine obatoclax (GX15-070) and related analogues: anion binding, transmembrane transport, and cytotoxicity properties

Synthetic prodiginine obatoclax shows promise as a potential anticancer drug. This compound promotes apoptosis of cancer cells, although the mechanism of action is unclear. To date, only the inhibition of BCL-2 proteins has been proposed as a mechanism of action. To gain insight into other possible modes of action, we have studied the anion-binding properties of obatoclax and related analogues in solution, in the solid state, and by means of density functional theory calculations. These compounds are well suited to interact with anions such as chloride and bicarbonate. The anion-transport properties of the compounds synthesized were assayed in model phospholipid liposomes by using a chloride-selective-electrode technique and (13)C NMR spectroscopy. The results demonstrated that these compounds are efficient anion exchangers that promote chloride, bicarbonate, and nitrate transport through lipid bilayers at very low concentrations. In vitro studies on small-cell lung carcinoma cell line GLC4 showed that active ionophores are able to discharge pH gradients in living cells and the cytotoxicity of these compounds correlates well with ionophoric activity.     

Click assembly of dye-functionalized octasilsesquioxanes for highly efficient and photostable photonic systems

New hybrid organic–inorganic dyes based on an azide‐functionalized cubic octasilsesquioxane (POSS) as the inorganic part and a 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) chromophore as the organic component have been synthesized by copper(I)‐catalyzed 1,3‐dipolar cycloaddition of azides to alkynes. We have studied the effects of the linkage group of BDP to the POSS unit and the degree of functionalization of this inorganic core on the ensuing optical properties by comparison with model dyes. The high fluorescence of the BDP dye is preserved in spite of the linked chain at its meso position, even after attaching one BDP moiety to the POSS core. The laser action of the new dyes has been analyzed under transversal pumping at 532 nm in both the liquid phase and when incorporated into solid polymeric matrices. The monosubstituted new hybrid dye exhibits high lasing efficiency of up to 56 % with high photostability, with its laser output remaining at the initial value after 4×10⁵ pump pulses in the same position of the sample at a repetition rate of 30 Hz. However, functionalization of the POSS core with eight fluorophores leads to dye aggregation, as quantum mechanical simulation has revealed, worsening the optical properties and extinguishing the laser action. The new hybrid systems based on dye‐linked POSS nanoparticles open up the possibility of using these new photonic materials as alternative sources for optoelectronic devices, competing with dendronized or grafted polymers.     

Building an empirical mass spectra library for screening of organic pollutants by ultra-high-pressure liquid chromatography/hybrid quadrupole time-of-flight mass spectrometry

Hybrid quadrupole time-of-flight mass spectrometry (QTOF MS) has gained wide acceptance in many fields of chemistry, for example, proteomics, metabolomics and small molecule analysis. This has been due to the numerous technological advances made to this mass analyser in recent years. In the environmental field, the instrument has proven to be one of the most powerful approaches for the screening of organic pollutants in different matrices due to its high sensitivity in full acquisition mode and mass accuracy measurements. In the work presented here, the optimum experimental conditions for the creation of an empirical TOF MS spectra library have been evaluated. For this model we have used a QTOF Premier mass spectrometer and investigated its functionalities to obtain the best MS data, mainly in terms of mass accuracy, dynamic range and sensitivity. Different parameters that can affect mass accuracy, such as lock mass, ion abundance, spectral resolution, instrument calibration or matrix effect, have also been carefully evaluated using test compounds (mainly pesticides and antibiotics). The role of ultra-high-pressure liquid chromatography (UHPLC), especially when dealing with complex matrices, has also been tested. In addition to the mass accuracy measurements, this analyser allows the simultaneous acquisition of low and high collision energy spectra. This acquisition mode greatly enhances the reliable identification of detected compounds due to the useful (de)protonated molecule and fragment ion accurate mass information obtained when working in this mode. An in-house empirical spectral library was built for approximately 230 organic pollutants making use of QTOF MS in MS(E) mode. All the information reported in this paper is made available to the readers to facilitate screening and identification of relevant organic pollutants by QTOF MS.     

Rapid wide-scope screening of drugs of abuse, prescription drugs with potential for abuse and their metabolites in influent and effluent urban wastewater by ultrahigh pressure liquid chromatography-quadrupole-time-of-flight-mass spectrometry

In the present work, a rapid method with little sample handling has been developed for determination of 23 selected volatile organic compounds in environmental and wastewater samples. The method is based on headspace solid-phase microextraction (SPME) followed by gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) determination using triple quadrupole analyzer (QqQ) in electron ionization mode. The best conditions for extraction were optimised with a factorial design taking into account the interaction between different parameters and not only individual effects of variables. In the optimized procedure, 4 mL of water sample were extracted using a 10 mL vial and adding 0.4 g NaCl (final NaCl content of 10%). An SPME extraction with carboxen/polydimethylsiloxane 75 μm fiber for 30 min at 50°C (with 5 min of previous equilibration time) with magnetic stirring was applied. Chromatographic determination was carried out by GC-MS/MS working in Selected Reaction Monitoring (SRM) mode. For most analytes, two MS/MS transitions were acquired, although for a few compounds it was difficult to obtain characteristic abundant fragments. In those cases, a pseudo selected reaction monitoring (pseudo-SRM) with three ions was used instead. The intensity ratio between quantitation (Q) and confirmation (q) signals was used as a confirmatory parameter. The method was validated by means of recovery experiments (n=6) spiking mineral water samples at three concentration levels (0.1, 5 and 50 μg L(-1)). Recoveries between 70% and 120% were generally obtained with relative standard deviations (RSDs) lower than 20%. The developed method was applied to surface water and wastewater from a wastewater treatment plant and from a municipal solid-waste treatment plant. Several compounds, like chloroform, benzene, trichloroethylene, toluene, tetrachloroethylene, dibromochloromethane, xylenes and bromoform were detected and confirmed in all the samples analyzed.