Mass spectrometric studies of cyclopropanes with electronegative substituents. Indication of methoxy group randomization in (±) dimethyl 2-methoxy-3,3-dimethylcyclopropane-1,1-dicarboxylate

(±) 2-Methoxy-3,3-dimethylcyclopropane-1,1-carboxylate was studied by electron impact and chemical ionization mass spectrometry. By using selective deuteration of the methyl groups, it was established that extensive randomization of the methoxy groups takes place prior to the decomposition of the molecular ion.     

Conversions between ordered and disordered cellulose. Effects of mechanical treatment followed by cyclic wetting and drying

An investigation into the effects of mechanical treatment and hydration on the order of cellulose substrates (microcrystalline cellulose and Cladophora cellulose) was performed by the use of ball milling followed by cyclic wetting and drying. The results, monitored by¹³C-CP/MAS NMR-spectroscopy, were evaluated by calculation of the crystallinity indices and principal component analysis of the NMR data acquired. The results showed that a large part of the disorder induced by the mechanical treatment of cellulose by ball milling is reversible and reordering upon hydration leads to the cellulose I form initially present. The C4 signals corresponding to the reversibly disordered cellulose chains are observed in the amorphous region between 79 and 86 ppm in the¹³C-CP/MAS NMR-spectra together with signals from cellulose chains on the surface of ordered regions. The peak cluster which contains the C2, C3 and C5 ring carbons can be divided into two specific spectral regions; one between 74 and 77 ppm largely originates from ring carbons within disordered cellulose structures, and one between 70 and 74 ppm contains larger contributions from ordered cellulose. The behaviour of the celluloses upon milling is in accordance with a concept of ordered cellulose fibrils containing amorphous cellulose mainly as surface layers and induced reversible lattice distortions.     

Two Highly Populated Conformations at Room Temperature of Monterine and Granjine, Antitumor Bisbenzylisoquinoline Alkaloids: Origin and Tridimensional Structures

Monterine 1 as well as granjine 3, 1R,1'S configured biphenylic bisbenzylisoquinoline alkaloids, generate two highly populated conformers. The interconversion of two forms was detected by saturation tranfer in (1)H NMR NOEs experiments. Tridimensional structure of the conformers was determined on the basis of (1)H NMR analysis of anisotropic shielding protons, by NOEs measurements and vicinal proton coupling constants of CH1-CH(2)alpha and CH1'-CH(2)alpha'. The structures established from NMR data were further refined to observe the mobility of 3D conformations by molecular dynamics simulation in vacuo. The highly populated conformers, monterine 1a and 1b, as well as granjine 3a and 3b, are interconvertible by rotation about the C1'-Calpha', Calpha'-C9', and C11'-C11 bonds and inversion of the benzyl D ring by reference to CH(2)alpha'. The slow exchange system was investigated by dynamic NMR spectroscopy: DeltaG()(c) 77.9 KJ/mol and k(c) 200 s(-)(1) for monterine 1; DeltaG()(c) 77.7 KJ/mol and k(c) 211 s(-)(1) for granjine 3. Natural and synthetic biphenylic bisbenzylisoquinolines displayed, in vitro, cytotoxic activities against human prostate and breast cancer cell lines.     

Thermal and spectroscopic investigation of europium and samarium sulphates hydrates by TG-FTIR and ICP-MS techniques

The investigation of europium(III) sulphate hydrate and samarium(III) sulphate hydrate was performed by thermal analysis (TG-DTG) and simultaneous infrared evolved gas analysis-Fourier transformed infrared (EGA-FTIR) spectroscopy. The TG, DTG and DTA curves were recorded at the 25–1400 °C in the dynamic air atmosphere by TG/DTA analyser. The infrared evolved gas analysis was obtained on the FTIR spectrometer. Eu₂(SO₄)₃·nH₂O (n = 3.97) and Sm₂(SO₄)₃·nH₂O (n = 8.11) were analysed, the dehydration and decomposition steps were investigated and the water content was calculated. The formation of different oxysulphates was studied.

The trace rare earth elements in Eu and Sm sulphates were determined by ICP-MS. The concentration of trace Eu, Sm, La, Gd, Y and Ce ranged from 3.9 × 10⁻⁶ to 1.5 × 10⁻⁴% (m/m).     

Quantification of lithium at ppm level in geological samples using nuclear reaction analysis

Journal of Radioanalytical and Nuclear Chemistry - Proton-induced reaction (p,α) is one type of nuclear reaction analysis (NRA) suitable especially for light element quantification....     

Microwave heated vapor-phase digestion method for biological sample materials

A microwave heated, vapor-phase nitric acid-hydrogen peroxide digestion method for pulverized, biological sample materials was developed. Sample masses up to 200 mg were digested using calibrated quartz inserts inside first generation type, low-pressure, Teflon-PFA microwave vessels. In the first step, samples were digested in the vapor-phase for 80 min using a progressive heating pattern. Three mL of 70% nitric acid and 0.5 mL of 30% hydrogen peroxide were used as digestion reagents. In the second step, the small residue left after first step digestion was dissolved in 1.4% nitric acid or additionally with 0.5% hydrofluoric acid by heating for 15 min. The digestion method was optimized using pike (Esox lucius) muscle as a test material. The method was further optimized using three certified reference materials. Ca, Cu, Fe, Mg and Zn were determined from NIST-SRM 1577a bovine liver by ICP-AES. Cr and Ni were determined from NIST-SRM 8433 corn bran and NRCC DOLT-2 dogfish liver by GFAAS. For all elements the values obtained were close or within certified limits. Spike recoveries were between 96 to 107%. Digestion efficiency ranged from 91 to 99%.     

A kinetic study of the high temperature rearrangement of 4‐ethyl‐3,5‐diphenyl‐4H‐1,2,4‐triazole

The kinetics of the thermal rearrangement 4‐ethyl‐3,5‐diphenyl‐4H‐1,2,4‐triazoles, 1 , to the corresponding 1‐ethyl‐3,5‐diphenyl‐1‐alkyl‐1H‐1,2,4‐triazoles, 2 , was studied in 15‐Crown‐5 and octadecane at 330 °C. The reaction was very slow in octadecane but proceed well in 15‐Crown‐5. The reaction order for the reaction was not constant but changed from an initial second order rate law towards a first order rate law as the reaction progressed. This was confirmed by the concentration dependent reaction order, n_c, which was larger than the time dependent rate law, n_t. The rationale for the observation was, that at high substrate concentrations the reaction order was second order while at lower concentrations a competing solvent assisted reaction plays an increasing important role. The data were in agreement with a mechanism in which the neutral 4‐alkyl‐triazoles in an intermolecular nucleophilic displacement reaction form a triazolium triazolate, which in a subsequent nucleophilic reaction gives the observed product.     

On the application of ICP-MS techniques for measuring uranium and plutonium: a Nordic inter-laboratory comparison exercise

Inductively coupled plasma mass spectrometry (ICP-MS) techniques are widely used for determination of long-lived radionuclides and their isotopic ratios in the nuclear fields. Uranium (U) and Plutonium (Pu) isotopes have been determined by many researchers with ICP-MS due to its relatively high sensitivity and short measurement time. In this work, an inter-laboratory comparison exercise among the Nordic countries was performed, focusing on the measurement of U and Pu isotopes in certified reference materials by ICP-MS. The performance and characters of different ICP-MS instruments are evaluated and discussed in this paper.     

Reconstruction of the finite size canonical ensemble from incomplete micro-canonical data

In this paper we discuss how partial knowledge of the density of states for a model can be used to give good approximations of the energy distributions in a given temperature range. From these distributions one can then obtain the statistical moments corresponding to e.g. the internal energy and the specific heat. These questions have gained interest apropos of several recent methods for estimating the density of states of spin models. As a worked example we finally apply these methods to the 3-state Potts model for cubic lattices of linear order up to 128. We give estimates of e.g. latent heat and critical temperature, as well as the micro-canonical properties of interest.      

A Theoretical Study of ãA2 CH2

The potential energy surface and dipole moment surfaces of the ã⁴A₂ electronic state of CH₂⁺ are calculated ab initio using an augmented correlation-consistent polarized valence quadruple-ζ (aug-cc-pVQZ) basis set, with the incorporation of dynamical correlation using the coupled cluster method with single and double excitations and perturbatively connected triple excitations [CCSD(T)]. We use these surfaces in the MORBID program system to calculate rotation and rotation-vibration term values for ã-state CH₂⁺, CD⁺₂, and CHD⁺ and to simulate the rotation and rotation-vibration absorption spectrum of CH₂⁺ in the ã⁴A₂ electronic state. Our work is motivated by studies of CH₂⁺ that use the Coulomb explosion imaging technique and by the goal of predicting spectra that may be obtained from discharge sources. Although the ã state is the lowest-lying excited state above the X?/Ã ground state pair, it turns out to be relatively high-lying, and we determine that T_e(ã)=30447.5 cm⁻¹. The equilibrium bond angle for ã-state CH₂⁺ is only 77.1°; as a result the asymmetric top κ value is close to 0, and the molecule is equally far from the oblate and prolate symmetric top limits in this electronic state.