气相色谱-电子轰击源质谱法测定茶叶中氟虫腈残留量

建立了茶叶中氟虫腈残留量快速测定的气相色谱-电子轰击源质谱法。茶叶中的氟虫腈用正己烷-丙酮(7:3,V/V)混合液提取,经石墨化碳黑固相萃取小柱净化后,用正己烷-丙酮(9:1,V/V)混合液洗脱,浓缩定容后,用气相色谱-电子轰击源质谱法测定,外标法定量。结果表明,目标物质在0.001~0.040 mg/L范围内的线性关系良好;空白样品在0.002~0.010 mg/L范围三水平加标回收实验的平均回收率在96.6%~114.2%之间,相对标准偏差(n=6)为2.9%~4.4%;方法的定量限为0.001 mg/kg。该方法能满足茶叶中氟虫腈残留量0.002 mg/kg的检测要求。     

扩散模型和凝聚模型耦合作用下胶体凝聚动力学的Monte Carlo模拟研究

以扩散模型(Ds(γ)=D0×sγ)和凝聚模型(Pij(σ)=P0×(i×j)σ)为基础,对胶体体系随时间的演变、团簇大小分布及其标度关系、团簇的重均大小S(t)的变化规律以及模型对最终分形维数的影响四个角度进行了比较研究,发现扩散指数γ0和凝聚概率指数σ0对胶体的凝聚动力学过程有相似的影响.本文在较宽的γ和σ取值范围内,对胶体的凝聚动力学进行了模拟研究,对慢速凝聚向快速凝聚的转化机理作了定量分析,并进一步分析了在团簇-团簇凝聚(CCA)模型下,得到类似扩散置限凝聚(DLA)模型的凝聚体的物理意义,结果表明:(1)γ0代表了体系中团簇或单粒做"定向运动"而非无规则的布朗运动的情况.这种"定向运动"的推动力可能来自于大团簇产生的强"长程范德华力"、"电场力"等,或来自于体系边界处的外力场的作用.(2)当σ0时,体系成为先快后慢的慢速凝聚,这可能对应大团簇为一排斥中心,即胶体颗粒存在"排斥力场"的现象.(3)证实了团簇的重均大小在凝聚过程的早期按指数规律增长,而后期按幂函数规律增长的实验现象.模拟研究还表明,胶体体系的凝聚动力学过程,在σ0时是一个存在正反馈机制的非线性动力学过程,而在σ0时则体现出负反馈的特征.     

Rhodium(III)‐Catalyzed Transannulation of Cyclopropenes with N‐Phenoxyacetamides through CH Activation

An efficient rhodium(III)‐catalyzed synthesis of 2H‐chromene from N‐phenoxyacetamides and cyclopropenes has been developed. The reaction represents the first example of using cyclopropenes as a three‐carbon unit in rhodium(III)‐catalyzed C(sp²)? H activations.     

混合基质水处理膜:材料、制备与性能

以反渗透、纳滤为代表的膜技术已广泛应用于海水和苦咸水脱盐等水处理过程。通过将纳米颗粒添加到传统复合膜基质中,可以制备具有高分离性能和耐污染性的新型膜材料。混合基质膜结合了无机材料及有机聚合物各自的优点,是新型水处理膜材料的发展方向。本文综述了添加无机纳米颗粒的混合基质反渗透、纳滤及正渗透膜的研究进展,详细讨论了不同类型纳米材料的性质和功能,分析了表面有机改性对改善纳米材料分散性以及与聚合物基质相容性的作用,探讨了纳米材料添加方式和膜制备方法对膜结构和性能的影响。在此基础上,进一步探究了混合基质膜的成膜及分离机理,归纳了目前研究中存在的主要问题,并对未来水处理膜材料的研发方向提出了建议。     

UV-Vis Spectrum and the Third-order Nonlinear Optical Properties of the Chiral Camphorderived β-diketonate Platinum Complexes

UV-Vis spectrum and the third-order nonlinear optical properties of the chiral camphor-derived β-diketonate have been studied at the B3LYP/6-31G* level. The results showed that the introduction of electron-drawing group-CF3 and-C3F7 on β-diketonate made the strongest absorption peak red-shift and the lowest energy absorption blue-shied. Introduction of-OC2H5 on the benzene or pyridine ring made the lowest energy absorption blue-shift. When the-C2H3 was introduced on the benzene or pyridine ring, the lowest energy absorption was red-shifted. Introduction of electron-donating group on β-diketonate can enlarge their nonlinear optical properties. On the contrary, the introduction of electron-drawing group dropped it down.     

Au/TiO2 nanotube catalysts prepared by combining sol–gel method with hydrothermal treatment and their catalytic properties for CO oxidation

A new preparation method for Au/TiO₂ nanotubes (NTs) by combing sol–gel with hydrothermal treatment technique was developed. The TiO₂ NTs calcined at 300 °C were nearly uniform, and the gold particles were distributed homogeneously. The possible formation mechanism was suggested. The 5 % Au/TiO₂ NTs calcined at 300 °C had the best catalytic activity for CO oxidation, and their conversion of CO remained at 100 % during 60 h on stream. This preparation method could improve the thermal stability of Au/TiO₂ nanotube catalysts.     

侧基含羟基的主链偶氮苯液晶共聚酯的合成及其光响应行为

以4,4’-双(6-羟基己氧基)联苯(BHHBP)、4,4’-双(6-羟基己氧基)偶氮苯(BHHAB)为液晶基元,利用苹果酸二乙酯(DM)和苯基丁二酸(PSA)采用无规共聚,合成了侧基含羟基的偶氮苯液晶共聚酯(Az-LCP).先在液晶态下拉伸取向,然后用六亚甲基二异氰酸酯(HDI)交联制备单畴取向偶氮苯液晶交联网络.通过核磁共振氢谱(1H-NMR)、凝胶渗透色谱(GPC)测试,对合成的Az-LCP进行结构表征,通过示差扫描量热分析(DSC)、X射线衍射(XRD)、偏光光学显微镜(POM)等对其液晶相变行为进行表征,研究了偶氮苯含量、交联密度、薄膜厚度对其光致弯曲行为的影响.结果表明,偶氮苯含量10%,交联12 h的Az-LCP1具有最佳的光致弯曲回复行为.     

Surface Design for Immobilization of an Antimicrobial Peptide Mimic for Efficient Anti-Biofouling

Microbial surface attachment negatively impacts a wide range of devices from water purification membranes to biomedical implants. Mimics of antimicrobial peptides (AMPs) constituted from poly(N-substituted glycine) „peptoids“ are of great interest as they resist proteolysis and can inhibit a wide spectrum of microbes. We investigate how terminal modification of a peptoid AMP-mimic and its surface immobilization affect antimicrobial activity. We also demonstrate a convenient surface modification strategy for enabling alkyne–azide „click“ coupling on amino-functionalized surfaces. Our results verified that the N- and C-terminal peptoid structures are not required for antimicrobial activity. Moreover, our peptoid immobilization density and choice of PEG tether resulted in a „volumetric“ spatial separation between AMPs that, compared to past studies, enabled the highest AMP surface activity relative to bacterial attachment. Our analysis suggests the importance of spatial flexibility for membrane activity and that AMP separation may be a controlling parameter for optimizing surface anti-biofouling.     

Sorbents for the Direct Capture of CO2 from Ambient Air

The urgency to address global climate change induced by greenhouse gas emissions is increasing. In particular, the rise in atmospheric CO₂ levels is generating alarm. Technologies to remove CO₂ from ambient air, or “direct air capture” (DAC), have recently demonstrated that they can contribute to “negative carbon emission.” Recent advances in surface chemistry and material synthesis have resulted in new generations of CO₂ sorbents, which may drive the future of DAC and its large‐scale deployment. This Review describes major types of sorbents designed to capture CO₂ from ambient air and they are categorized by the sorption mechanism: physisorption, chemisorption, and moisture‐swing sorption.     

Ultrafast,Low‐Cost,and Mass Production of High‐Quality Graphene

Fast, mass, and low‐cost production of high‐quality graphene, which is alluring, remains a great challenge, even though some approaches have shown potential for mass synthesis of graphene. Very recently a great breakthrough was made by Tour and co‐workers (Nature 2020, 577, 647–651): in just a second, easily exfoliated and highly crystalline graphene was produced from abundant carbon‐containing species by cost‐effective flash Joule heating with a low energy input of 7.2 kJ per gram graphene. Such an ultrafast, economic, and scalable process for high‐quality graphene production can be considered as a milestone in the graphene field and is highlighted in this article.