Tuning the physical properties of a nematic liquid crystal elastomer actuator

In this report we demonstrate the ability to tune the physical properties of a liquid crystal elastomer (LCE) by varying the amount and type of crosslinking within the elastomer network. LCE films composed of a single mesogenic compound were capable of uniaxial contraction when thermally actuated through the nematic to isotropic phase of the material. We probed the physical properties of the LCE films while varying the amount and concentration of two crosslinking agents and measured actuation strains of 10–35%, elastic moduli of 3–14 MPa, and transition temperatures ranging between 75 and 60°C. The viscous losses of the elastomers and the estimated work capable of being produced by the films were also evaluated. The ability to tune the physical properties of the LCE films allows for a wide range of applications including robotics, microelectromechanical systems (MEMS), shape‐changing membranes, and/or microfluidics.     

Effect of the twisted alignment on the liquid crystal wave‐front corrector

The effect of twisted alignment on the phase modulation of a liquid crystal wave‐front corrector was investigated. First, the effect of twisted alignment is discussed in terms of the modulation principle of the liquid crystal molecule. Only partial incident light can be modulated because of the effect of the twisted alignment. Other unmodulated light will affect the correction accuracy and the resolution of the image. The blazed grating method is proposed to solve this problem. Adaptive correction was performed without the blazed grating method and the correction results are poor. A similar adaptive correction experiment was performed with the blazed grating method and a better correction result is obtained. The residual averaged wave‐front errors are PV = 0.101λ and RMS = 0.015λ and a resolvable image is obtained.     

In situ self-assembly synthesis of gold nanoparticle arrays on polystyrene microspheres and their surface plasmon resonance

Gold (Au) nanoparticle arrays with tunable morphology and optical characteristics were synthesized by in-situ self-assembly process that occurred on the surface of aniline-modified polystyrene (PS) microspheres. The method can be used to control the growth of both single and aggregated Au nanoparticle arrays on PS microsphere surface. This method could also be adapted for synthesis of other noble metals hybrid materials, which opens exciting opportunities for their practical applications.     

Synthesis of Densely Functionalised 5‐Halogen‐1,3‐oxazin‐2‐ones by Halogen‐Mediated Regioselective Cyclisation of N‐Cbz‐Protected Propargylic Amines: A Combined Experimental and Theoretical Study

A very efficient synthesis of 5‐halogen‐1,3‐oxazin‐2‐ones has been accomplished by the halocyclisation reaction of chiral nonracemic N‐carbobenzyloxy (N‐Cbz)‐protected propargylic amines by using I₂, Br₂ and Cl₂ as electrophile sources. The nature of the halogen influences the reaction time and yield. However, in all cases the reaction is totally regioselective taking place through a 6‐endo‐dig process regardless of the nature of the halogen and of the substituents in the starting material. To rationalise the experimental results, theoretical studies at the B3LYP/6‐311G* level have been performed.     

Total synthesis of methyl l-daunosaminide hydrochloride via chiral 1,3-oxazine

Total synthesis of methyl l-daunosaminide hydrochloride was achieved from readily available l-tyrosine. Key steps in this strategy were palladium(0) catalyzed stereoselective intramolecular oxazine formation and catalytic hydrogenation of oxazine intermediate. This paper reported ¹H and ¹³C NMR data of α- and β-anomer of methyl l-daunosaminide hydrochloride.     

A validated stability-indicating LC method for simultaneous determination of quinapril and hydrochlorothiazide in pharmaceutical samples

A stability-indicating liquid chromatographic method was developed and validated for simultaneous determination of quinapril and hydrochlorothiazide in drug substances and dosage forms. Chromatographic separation of quinapril, hydrochlorothiazide and its degradation products was achieved on a RP-18 column, using acetonitrile and phosphate buffer (pH 4.6) as mobile phase in a gradient mode and detection at 216 nm. Stress testing was performed under hydrolytic, oxidative, thermal and photolytic conditions. The degradation products were well resolved from main peaks, proving the stability-indicating power of the method. The assay was linear for quinapril and hydrochlorothiazide concentrations of 40–200 µg mL^?1 and 25–125 µg mL^?1, respectively. The developed method was selective, accurate and precise for quinapril and hydrochlorothiazide determination. This method was used to quantify both drugs in combined commercial tablets. The results showed that the proposed method was found to be suitable for quantitative determination and the stability study of quinapril and hydrochlorothiazide in pharmaceutical samples.      

Solar Driven Gas Phase Advanced Oxidation Processes for Methane Removal - Challenges and Perspectives

Methane (CH₄) is a potent greenhouse gas and the second highest contributor to global warming. CH₄ emissions are still growing at an alarmingly high pace. To limit global warming to 1.5 °C, one of the most effective strategies is to reduce rapidly the CH₄ emissions by developing large-scale methane removal methods. The purpose of this perspective paper is threefold. (1) To highlight the technology gap dealing with low concentration CH₄ (at many emission sources and in the atmosphere). (2) To analyze the challenges and prospects of solar-driven gas phase advanced oxidation processes for CH₄ removal. And (3) to propose some ideas, which may help to develop solar-driven gas phase advanced oxidation processes and make them deployable at a climate significant scale.     

Flexible strain sensor with ridge-like microstructures for wearable applications

The flexible stretchable sensors have great potential for implementation in various applications, such as intelligent soft robots, health monitoring, and motion detection. However, most of the flexible stretchable sensors with microstructures and high sensitivities are fabricated by expensive templates and complex processes. In consideration of large-scale fabrication, a low cost and efficient way is in great demand. Herein, electroless plating on Nafion films with decent swelling ratios are proposed to fabricate stretchable sensors with wrinkle-structured electrodes. By adding isopropanol (IPA) to the electroless plating process, the H₂O-IPA sensor with larger swelling ratio shows deeper surface wrinkles, higher surface roughness, and better sensitivity to strain. At the same time, the H₂O-IPA sensor exhibit good durability (500 cycles). By mounting the sensor on the joint of human finger, the motion of the finger bending and even the bending degree can be accurately detected, indicating the potential use in the field of wearable devices and soft electronic skins.     

Control of pore environment in highly porous carbon materials for C2H6/C2H4 separation with exceptional ethane uptake

Adsorptive separation of C₂H₆ from C₂H₄ by adsorbents is an energy-efficient and promising method to boost the polymer grades C₂H₄ production. However, that C₂H₆ and C₂H₄ display very similar physical properties, making their separation extremely challenging. In this work, by regulating the pore environment in a family of chitosan-based carbon materials (C-CTS-1, C-CTS-2, C-CTS-4, and C-CTS-6)- we target ultrahigh C₂H₆ uptake and C₂H₆/C₂H₄ separation, which exceeds most benchmark carbon materials. Explicitly, the C₂H₆ uptake of C-CTS-2 (166 cm³/g at 100 kPa and 298 K) has the second-highest adsorption capacity among all the porous materials. In addition, C-CTS-2 gives C₂H₆/C₂H₄ selectivity of 1.75 toward a 1:15 mixture of C₂H₆/C₂H₄. Notably, the adsorption enthalpies for C₂H₆ in C-CTS-2 are low (21.3 kJ/mol), which will facilitate regeneration in mild conditions. Furthermore, C₂H₆/C₂H₄ separation performance was confirmed by binary breakthrough experiments. Under different ethane/ethylene ratios, C-CTS-X extracts a low ethane concentration from an ethane/ethylene mixture and produces high-purity C₂H₄ in one step. Spectroscopic measurement and diffraction analysis provide critical insight into the adsorption/separation mechanism. The nitrogen functional groups on the surface play a vital role in improving C₂H₆/C₂H₄ selectivity, and the adsorption capacities depend on the pore size and micropore volume. Moreover, these robust porous materials exhibit outstanding stability (up to 800 °C) and can be easily prepared on a large scale (kg) at a low cost (～$26 per kg), which is very significant for potential industrial applications.     

Aromaticity of ortho and meta 8-Cycloparaphenylene and Their Dications: Induced Magnetic Field Analysis with Localized and Delocalized Orbitals in Strained Nanohoops

Dications of cycloparaphenyles ([n]CPPs) are known to exhibit in-plane global aromaticity, contained in a nanobelt structure. Recently synthesized ortho and meta isomers of [n]CPPs break the radial symmetry of π structure incorporating perpendicular oriented π orbitals. Herein we set to explore the aromaticity of neutral and dicationic ortho and meta isomers of [8]CPP by dissecting the induced magnetic field to contributions of the twofold radial/perpendicular π system using delocalized canonical molecular orbitals (CMO), and introducing the natural localized molecular orbitals (NLMO) analysis with DFT methods. The dications sustain a reduced global aromatic character of the radial π system under a perpendicular orientation of the external field which declines from ortho to meta isomer and reinforces local aromaticity of ortho ring while it destroys aromaticity of meta ring. Aromaticity variations are determined by symmetry governed rotational excitations of frontier π orbitals. The parallel orientation reveals a substantial reduction of local aromaticity verified with NICS_π analysis and electron delocalization indices.