Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.     

FT-IR and Raman spectroscopic study of hydrated rubidium (cesium) borates and alkali double borates

FT-IR and Raman spectra of five hydrated alkali borates and five hydrated alkali double borates have been recorded at room temperature in the range 400 to 4000 cm⁻¹, and analyzed. Fundamental vibrational modes have been identified and assignments tentatively made in comparison with the work of Janda and Heller, and Li Jun. The text was submitted by the authors in English.     

Selective dimerization of α-methylstyrene catalyzed by a solid acid

A novel solid acid prepared from concentrated sulfuric, boric and phosphoric acid is a highly selective catalyst for the dimerization of α-methylstyrene at room temperature to generate 4-methyl-2,4-diphenyl-1-pentene.     

Preparation of solutions of amidomagnesium chlorides in poly(ethylene oxide) and their characterization by conductivity measurements

Polymer electrolyte systems were prepared for the first time by dissolution of amidomagnesium chlorides in poly(ethylene oxide), (PEO). For the preparation, solutions of (hexamethyldisilylamido)magnesium chloride, (dimethylpyrrolyl)magnesium chloride, (diisopropylamido)magnesium chloride, piperidinomagnesium chloride and morpholinomagnesium chloride were chosen. The composition of these polymer electrolyte systems corresponds to the general formula R₂NMgCl·P(EO)_n·THF. Most work has been done with the system (hexamethyldisilylamido)magnesium chloride in PEO, (Me₃Si)₂NMgCl·P(EO)_n·THF, with n= 3, 4, 5, or 7. The electrolytes have a soft rubber-like consistency. At 30 °C, electrical conductivities of 10⁻⁶–10⁻⁵ S/cm were found. The conductivities were measured in the temperature range 20–60 °C. Within this temperature range a linear dependence of the logarithms of the conductivity on the inverse temperature was found and activation energies for the conducting process of 30–60 kJ/mol were calculated. Using those polymer electrolytes with a high content of the amidomagnesium compound, a reversible magnesium deposition takes place by cathodic reduction at potentials below −1.9 V vs. a Ag/AgCl reference electrode. These polymer electrolytes were found to be stable against oxidation up to about −0.3 V vs. Ag/AgCl. Electronic Publication     

3，19－二羟基－1－硫杂－5，8，11，14，17－五氧杂环二十烷的醚化与缩聚反应

３，１９－二羟基－１－硫杂－５，８，１１，１４，１７－五氧杂环二十烷（简称二羟基硫杂２０－冠－６）在一缩二乙二醇二甲醚和氢化钠存在下可与卤代烷顺利地进行醚化反应，得到双己氧基、双十二烷氧基、双十六烷氧基、双节氧基和双烯丙氧基硫杂２０－冠－６，同时也得到了单己氧基、单十二烷氧基、单十六烷氧基和单辛氧基单羟基疏杂２０－冠－６副产物。二羟基硫杂冠醚可顺利地与丁二酰氯缩聚，得到主链含硫杂冠醚基团的聚酯     

镧对镉胁迫下豌豆幼苗根部细胞内离子平衡及膜质子泵的影响

以水培豌豆(PisumsativumL)幼苗为材料,研究了La3+对Cd2+胁迫下豌豆幼苗生长、叶部与根部细胞对Cd2+的吸收、根部细胞内无机离子平衡体系及膜H+-ATPase,H+-PPase活性的影响。结果表明:Cd2+胁迫下喷施适宜浓度的La3+(0.50mg·L-1)可使豌豆幼苗相对生物量、苗长、叶绿素含量以及光合速率受到的毒害明显缓解,有效减少叶部与根部细胞对Cd2+的吸收,显著减轻了Cd2+胁迫导致的离子平衡系统的紊乱,明显缓解Cd2+对质膜及液泡膜H+-ATPase,H+-PPase活性的抑制作用。10mg·L-1Cd2+胁迫下La3+的保护效应比30mg·L-1Cd2+胁迫下更为显著。样品中La3+的测定和分析结果还表明,外源La3+处理后,La3+主要结合于细胞膜外,进入原生质体的仅占很小部分,但30mg·L-1Cd2+处理样品中La3+进入细胞的量则明显多于10mg·L-1Cd2+处理的样品。     

Fabrication of ultrathin films with large third-order nonlinear optical properties.

An ultrathin composite film containing anionic Ag-His complexes (His: L-Histidine) and oppositely charged BH-PPV was fabricated by means of the electrostatic layer-by-layer self-assembly technique. UV/Vis spectra showed a continuous deposition process of Ag-His complexes and BH-PPV. The film structure was characterized by using small-angle X-ray diffraction, AFM, and SEM. The nonlinear optical properties of the ultrathin film were studied by using the Z-scan technique with a laser duration of 8 ns at a wavelength of 532 nm. The film sample exhibited a strong nonlinear saturated absorption, with an alpha2 value of -3.9 x 10(-5) mW(-1) and a self-defocusing effect with an n2 value of -4.78 x 10 (-12) m2W(-1).     

Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.     

Molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory

A method is proposed to calculate molar conductivity based on mode coupling theory in which the ion transference number is introduced into the theory. The molar conductivities of LiPF6, LiClO4, LiBF4, LiAsF6 in PC (propylene carbonate) are calculated based on this method. The results fit well to the literature data. This presents a potential way to calculate the conductivities of Li-ion battery electrolytes.