系综分布和它的小涨落近似

由“从正则分布出发，在小涨落近似下得出的能量涨落分布公式”求得的能量涨落的二次矩与直接由正则分布求得的二次矩完全相同，但分别由二求得的高次矩并不完全相同。     

Dirichlet型空间上的乘子

本文主要根据τ与μ的不同取值分三种情况刻划了Cn中单位球上Dirichlet 型空间上的点乘子空间M(Dτ,Dμ),并通过两个函数的构造表明:当τ≤n时,包含 关系M(Dτ)(?)Dτ和当τ>μ,τ>n-1时,包含关系M(Dτ)(?) M(Dμ)是严格的.     

关于可达矩阵的求法探讨

在《离散数学》、《图论》课程中 ,用矩阵表示图时 ,涉及到一类重要的矩阵——可达矩阵 ,它是判别图中任意两点是否有通路的重要手段 ,也是求强分图的重要方法 ,但是可达矩阵的求法比较复杂 .本文针对这一问题 ,对可达矩阵的求法进行了改进 ,提出了一种简单可行的算法 .     

纳米WO3的制备及其光解水析氧性能研究

用溶胶凝胶法,灼烧法合成了纳米级WO3,采用X-射线衍射、紫外可见漫反射光谱对WO3进行表征.在Fe3 为电子受体、溶液酸度pH为2.0情况下,研究了纳米级WO3在365nm紫外辐射下光解水析氧的光催化活性,并讨论了不同方法制备的催化剂活性差异的原因.结果表明,结晶程度越高、尺寸越小、比表面积越大的纳米级WO3具有更高的光分解水析氧活性,电子受体的浓度、溶液的酸度对析氧活性有明显的影响.     

一类拟线性大系统的稳定性

本文应用大系统的分解方法和一个推广的不等式,研究了一类拟线性大系统的稳定性问题,所得结果简洁、易于验证,且推导过程不复杂,最后给出了应用实例。     

微纳米加工技术在纳米物理与器件研究中的应用

物质在纳米尺度下可能呈现出与体材料不同的物理特件，这正是纳米科技发展的基础之一。要想探索在纳米尺度下材料物埋性质的变化规律及可能的应用领域，离不开相应的技术手段，微纳米加工技术作为当今高技术发展的重要技术领域之一，是实现功能人工纳米结构与器件微纳米化的基础。本文根据几个不同的应用领域，介绍了微纳米加工技术在纳米物理与器件研究领域的应用。     

Generalization of Einstein relation for doped organic semiconductors

Under the assumption of Gaussian energy distributions of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO), analytical expressions of generalized Einstein relation for electron and hole transport in doped organic semiconductor thin films are developed. Numerical calculations show that, although traditional Einstein relation still holds for low carrier concentrations, that is, the diffusion-coefficient-to-mobility ratio in units of k_BT/q, with k_B the Boltzmann’s constant, T the temperature and q the elementary charge, equals 1. But when the electron (hole) concentration is high, the diffusion-coefficient-to-mobility ratio for electrons (holes) changes strongly with the electron (hole) concentration, the doping level, the mean energy of LUMOs (HOMOs) of the dopant E_Ld (E_Hd) and the host E_L (E_H), as well as their variances. Dopants with E_Ld<E_L (E_Hd>E_H) affect the diffusion-coefficient-to-mobility ratio mainly in the range of low and middle carrier concentrations, while those with E_Ld>E_L (E_Hd<E_H) have significant effect only in the range of high carrier concentrations. It was found that there can be a maximum in the dependence of the diffusion-coefficient-to-mobility ratio on the quasi-Fermi energy or carrier concentration exist, for appropriate values of the doping level, the mean energy and variance of LUMO or HOMO states of the dopant. PACS 71.20.Rv; 72.90.+y; 73.50.-h     

Fission Barrier for ^240Pu in the Quadrupole Constrained Relativistic Mean Field Approach

The fission barrier for ^240pu is investigated beyond the second saddle point in the potentiM energy surface by the constrained relativistic mean field method with the newly proposed parameter set PK1. The microscopic correction for the centre-of-mass motion is essentiM to provide the correct potential energy surface. The shell effects that stabilize the nuclei against the fission is also investigated by the Strutinsky method. The shapes for the ground state, fission isomer and saddle-points, etc, are studied in detail.     

On the uniqueness of the foliation of spheres of constant mean curvature in asymptotically flat 3-manifolds

In this note we study constant mean curvature surfaces in asymptotically flat 3-manifolds. We prove that, outside a given compact subset in an asymptotically flat 3-manifold with positive mass, stable spheres of given constant mean curvature are unique. Therefore we are able to conclude that the foliation of stable spheres of constant mean curvature in an asymptotically flat 3-manifold with positive mass outside a given compact subset is unique.

     

3004铝合金“反常”锯齿屈服现象的研究

在应变速率为5.56×10^-5s^-1—5.56×10^-3s^-1的范围内，在不同温度下(从223K至773K)，对3004铝合金进行系列拉伸试验，探索其锯齿屈服规律；通过激活能的计算、内耗研究、微观组织观察和能谱分析，探讨锯齿屈服的机理与物理本质.结果表明，3004铝合金在形变过程中会出现动态应变时效现象；发现了一种“反常”的锯齿屈服现象：在出现锯齿屈服的温区内，存在锯齿屈服临界应变量转变温度T_t， 关键词： 动态应变时效 锯齿屈服 铝合金 内耗