Design of a reentrant double staggered ladder circuit for V-band coupled-cavity traveling-wave tube

The reentrant double staggered ladder slow-wave structure is employed in a high-power V-band coupled-cavity traveling-wave tube. This structure has a wide bandwidth, a moderate interaction impedance, and excellent thermal dissipation properties, besides the easy fabrication. A well-matched waveguide coupler is proposed for the structure. Combining the design of attenuators, a full-scale three-dimensional circuit model for the V-band coupled-cavity traveling-wave tube is constructed. The electromagnetic characteristics and the beam--wave interaction of this structure are investigated. The beam current is set to be 100 mA, and the cathode voltage is tuned from 16.8 kV to 15.8 kV. The calculation results show that this tube can produce a saturated average output power over 100 W with an instantaneous bandwidth greater than 1.25 GHz in the frequency ranging from 58 GHz to 62 GHz. The corresponding gain and electronic efficiency can reach over 32 dB and 6.5%, respectively.     

Anti-electroviscous effect of near-surface 5CB liquid crystal and its boundary lubrication property

The rheological properties of the near-surface 5CB (4-pentyl-4′-cyanobiphenyl) liquid crystal (LC) under an external electric field (EEF) are investigated using a dynamic quartz crystal microbalance (QCM). The real-time film-forming process and shearing response of the EEF-induced absorbed LC liquid are studied. The results indicate that the EEF-induced adsorbed LC is composed of a bulk liquid layer and a near-surface boundary layer. Within the boundary layer, the nematic 5CB LC presents an anti-electroviscous effect which may be due to the EEF-induced ordered structure. According to the estimation from QCM measurements, this near-surface layer is about 100 nm thick under certain electric strength and is irreversible even after the EEF is removed. Based on a QCM model, the near-surface LC layer presents a decreased and irreversible viscosity as the EEF voltage increases against the reversible electro-viscous effect of the bulk 5CB liquid crystal measured by rheometer and Raman spectrum measurements. The anti-electroviscous effect of the near-surface 5CB layer is also proved by an improved boundary lubrication property tested on a tribometer. The coefficient of friction of 5CB LC after a preliminary induction of EEF is the lowest one compared to those without EEF and during the application of EEF. The unique anti-electroviscous property of near-surface 5CB LC revealed in this article suggests a potential method to actively reduce shear resistance in boundary lubrication and in microfluidics.     

一种耦合外部电路的脉冲感应推力器磁流体力学数值仿真模型

为了深入研究脉冲感应推力器的工作原理,预测其推进性能,建立了一种耦合外部电路的磁流体力学模型,实现了对加速通道内等离子体二维流场结构演化过程及驱动电路放电过程的同步耦合求解.模拟计算所得美国MK-1推力器加速通道内的等离子体瞬态参数分布及推力器比冲、效率等性能参数均与实验数据一致;计算结果成功复现了推力器的工作物理图景.借助这一新模型,实现了对电路-等离子体双向耦合作用的定量分析,分析结果表明:耦合等离子体导致驱动电路等效电阻增大,电感减小;激励线圈与等离子体之间的互感随等离子体整体远离线圈表面而逐渐减小.     

Interaction of longitudinal phonons with discrete breather in strained graphene

We numerically analyze the interaction of small-amplitude phonon waves with standing gap discrete breather (DB) in strained graphene. To make the system support gap DB, strain is applied to create a gap in the phonon spectrum. We only focus on the in-plane phonons and DB, so the issue is investigated under a quasi-one-dimensional setup. It is found that, for the longitudinal sound waves having frequencies below 6 THz, DB is transparent and thus no radiation of energy from DB takes place; whereas for those sound waves with higher frequencies within the acoustic (optical) phonon band, phonon is mainly transmitted (reflected) by DB, and concomitantly, DB radiates its energy when interacting with phonons. The latter case is supported by the fact that, the sum of the transmitted and reflected phonon energy densities is noticeably higher than that of the incident wave. Our results here may provide insight into energy transport in graphene when the spatially localized nonlinear vibration modes are presented.     

Mesoporous titania films investigated by positron annihilation based on a slow positron beam

Tunable mesoporous titania (TiO₂) thin films were synthesized via a sol-gel method using an amphiphilic triblock copolymer F38 as the structural template. The dependence of crystalization, pore morphology and interconnectivity of TiO₂ films on the weight ratio of F38 was studied by wide-angle X-ray diffraction, field emission scanning electron microscopy and Doppler broadening of positron annihilation radiation spectroscopy based on a slow positron beam. By loading more F38, the crystallization of TiO₂ films is enhanced, accompanied by a decrement in oxygen vacancies/grain boundaries. Smaller and isolated mesopores are formed in the films prepared with F38 less than 15?wt%. The pore percolation occurs when the weight ratio of F38 is up to 20?wt% and larger and interconnected worm-like pores are formed.     

具有双网络结构高强度和形状记忆水凝胶

本文将形状记忆功能引入到双网络水凝胶设计之中.首先合成了聚乙二醇-聚丙烯酰氧乙基三甲基氯化铵/聚（丙烯酰胺-co-丙烯酸）（PEG-PDAC/P（AAm-co-AAc））双网络水凝胶,其中第一套网络由交联的聚乙二醇（PEG）链组成,包埋着聚电解质聚丙烯酰氧乙基三甲基氯化铵（PDAC）;第二套网络由丙烯酰胺（AAm）和丙烯酸（AAc）的共聚物交联组成,交联剂为N,N''-亚甲基双丙烯酰胺（MBAA）.结果表明,双网络水凝胶显示出高强度的特点,其断裂应力和韧性分别达到了0.9 MPa和3.8 MJ/m³.和传统地利用中性高分子作为柔软和韧性的第二套网络相比较,本文选择将具有弱电解质特性的丙烯酸单体引入到第二套网络中,利用丙烯酸与三价铁离子的络合作用,成功地赋予水凝胶在氧化环氧反应条件下的形状记忆功能.结果表明,只要巧妙地引入响应性单体,高强度和形状记忆这两种最重要的特性可以同时被引入到双网络水凝胶的设计之中.     

铜纳米阵列高效电解水产氧催化剂的制备

本文报道了一种利用简单的两步牺牲模板法,在泡沫铜基底表面完成了三维氧化铜纳米晶阵列的生长. 氧化铜纳米晶阵列具有良好的导电性,稳定性,在碱性溶液中有着优秀的电解水产氧催化性能. 氧化铜纳米晶阵列催化水的电化学氧化只需400 mV的过电势即可达到100 mA/cm²的电流密度,与其它铜基电解水产氧催化剂以及贵金属IrO₂相比都有着明显的优势. 氧化铜纳米晶阵列在270 mA/cm²左右的工作电流下连续工作10 h依然可以保持良好的稳定性,是相同的工作电压下IrO₂工作电流的10倍(约25 mA/cm²).     

金纳米四面体增强有机太阳电池光吸收及光伏性能研究

为增强有机太阳能电池的光利用率,提高能量转换效率,本文合成了金四面体形状的纳米粒子,并用聚苯乙烯磺酸钠(PSS)包裹形成了核壳结构的金纳米四面体(Au@PSS tetrahedra NPs).将其掺杂到有机太阳能电池空穴提取层与活性层的界面处,利用表面等离子体共振效应来增强活性层对光的吸收,从而提高有机太阳能电池的能量转换效率.研究了掺杂浓度和PSS包裹厚度对电池性能的影响.结果表明:掺杂浓度为6%时,器件性能最佳,能量转换效率达到3.08%; PSS壳层厚度优化为2.5 nm时,转换效率达到3.65%,较标准电池提升了22.9%.电池性能的改善主要源于金四面体纳米粒子的共振吸收峰位于给体材料吸收谱范围内,纳米粒子的共振促进了给体的吸收,同时PSS壳层的引入促进了激子的解离和电荷的转移,上述因素的改善提升了电池的短路电流、填充因子和转换效率.     

Entanglement Dynamics of a Generic-Spin Model

We investigate the entanglement dynamics of a generic-spin model with weak external field. We first derive the time-dependent solutions of angular momentum operators with short-time approximation and then numerically calculate the entangled witness. It’s shown that one can dynamically generate quantum entanglement by adjusting coupling strength.