Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.     

Mass spectrometric study of gamma-aryl-alpha,-gamma-diethoxy-alpha, beta-butenolides

Electron impact mass spectra of eight of the title compounds are reported. Abundant fragment ions were produced under electron impact (EI) conditions and, with one exception, the ($?hbox?ArC??equiv$ O) ions were the base peaks. The EI fragmentation mechanisms of two representative compounds were studied with the aid of high-resolution and mass-analyzed ion kinetic energy spectrometry (MIKES) data. The M(+) ions fragment to give both an odd-electron ion and an even-electron fragment ion. Two H-atom rearrangements proceeding via four-membered ring intermediates and three losses of CO through i- and alpha-fragmentations were observed under EI. On comparing fragmentations under EI conditions with those under FAB conditions for two of the compounds, the fragmentation mechanisms were reasonably similar, with additional fragmentations rationalized in terms of the ionization proton being located on the oxygen atom of the beta-ethoxy group.     

What are the pKa values of C-H bonds in aromatic heterocyclic compounds in DMSO?

A first-principle method has been successfully developed for the prediction of pK_a values of aromatic heterocyclic compounds in DMSO solution with a precision of 1.1 pK_a units. Comparison of theoretical results and experimental data (where available) also shows excellent consistency. Armed with this useful approach, the pK_a values for a series of aromatic heterocycles were calculated in DMSO. Moreover, a discussion of the relationships between hydrogen acidities and molecular structures is conducted for the first time (determinants of C-H acidities, substituent effects, and some practical use of dehydrometalation). These statistics could be useful for synthetic chemists to design proper routes for introduction of aromatic heterocyclic moiety, especially when dehydrometalation reactions are used.     

High-yield solvothermal formation of magnetic CoPt alloy nanowires

One-dimensional (1D) magnetic nanomaterials have attracted much attention recently because of their applications in magnetic recording and spintronics. Nevertheless, it remains a challenge to prepare free-standing magnetic nanowires in high yield. This Communication reports the successful high-yield synthesis of an interesting 1D ferromagnetic CoPt alloy by direct decomposition of platinum acetylacetonate and cobalt carbonyl compound in ethylenediamine solvent through a solvothermal reaction. The CoPt alloy nanowires obtained have a tunable diameter of 10-50 nm and a length along the longitudinal axis of up to several microns, depending on crystallization temperature and reaction time. A unique formation mechanism involving coarsening and ripening under solvothermal conditions was discovered. This research opens new opportunities in synthesizing nanomaterials through low-temperature solvothermal processes.     

Saturation ratio of poly(ethylene oxide) to silicate in melt intercalated nanocomposites

Melt intercalation has been found to be a very successful approach for preparation of polymer-clay nanocomposites. An aspect of this area that has been little investigated is the amount of polymer required to fill the interlayer galleries of the clay. This paper reports experiments which determine the amount of poly(ethylene oxide) (PEO) required to saturate the spacing between montmorillonite (MMT) or organically-modified bentonite (B34) layers. Differential scanning calorimetry (DSC), X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were used to determine the saturation ratios of PEO to silicates, which are then compared to theoretical calculations. The deduced saturation ratio of PEO to MMT is 28:72, and PEO to B34 15:85 by XRD and DSC, whilst ratios of PEO to MMT of 21:79 and PEO to B34 10:90 were obtained via TGA. The density of intercalated PEO in the silicate galleries is estimated to be 0.82 g/cm³, which suggests that PEO in the silicate galleries is far less efficiently packed than in the amorphous region of the bulk polymer.     

Two Novel Alkaloids from Zanthoxylum nitidum

Two novel alkaloids, 4,5‐dihydroxy‐1‐methyl‐3‐oxo‐2‐(trichloromethyl)‐3H‐indolium chloride ( 1 ) and 4‐(2‐methoxyethyl)‐N,N‐dimethylbenzenamine ( 2 ), were isolated from the EtOH extract of the roots of Zanthoxylum nitidum. Their structures were identified on the basis of spectroscopic and mass‐spectrometric analyses.     

四氟乙烯-乙烯溶液沉淀聚合

本文编制了一个简易计算机程序,测定了氟氯烷溶液沉淀聚合体系中四氟乙烯-乙烯共聚竞聚率:40℃:γC_2H_4=0.156±0.001,γC_2F_4=0.022±0.01670℃:γC_2H_4=0.197±0.001,γC_2F_4=0.055±0.020在此聚合体系中,聚合温度和共聚物组成比对链的规整性都有明显影响。当乙烯在45～55mol%范围内时,共聚物的IR随组成比而变化,利用此规律可简便地测定共聚物的组成比。     

Enantiomeric separation and quantification of fluoxetine (Prozac) in human plasma by liquid chromatography/tandem mass spectrometry using liquid-liquid extraction in 96-well plate format

Fluoxetine (Prozac) is currently one of the widely prescribed selective serotonin reuptake inhibitors (SSRIs) for the treatment of depression. A high-throughput sample preparation procedure using liquid-liquid extraction (LLE) in a 96-well plate format in conjunction with liquid chromatography/tandem mass spectrometry (LC/MS/MS) was developed and validated for quantification of fluoxetine enantiomers in human plasma. After addition of internal standard and ammonium hydroxide, samples were extracted with ethyl acetate. The organic extract was evaporated to dryness and reconstituted in methanol. Where possible, sample transfer and LLE steps were automated using a Tomtec Quadra 96 workstation. Adequate separation of fluoxetine enantiomeric pairs (resolution of 1.17) was achieved on a vancomycin column eluted with methanol containing 0.075% (by weight) ammonium trifluoroacetate. A triple quadrupole mass spectrometer, operated in the multiple reaction monitoring mode at m/z 310-->44 for fluoxetine enantiomeric pairs and m/z 287-->241 for oxazepam (internal standard), was used. Analysis was performed in the positive ion mode using atmospheric pressure chemical ionization (APCI). The standard curve range was 2.0-1000 ng/mL for each fluoxetine enantiomer. The intra- and inter-day precision and accuracy of the quality control (QC) samples were <12.5% (CV) and <13.6% (CV), respectively, for each fluoxetine enantiomer; the correlation coefficient was >0.990. Method ruggedness was demonstrated by the reproducible performance of the assay during a three-day validation period.     

CCl2自由基与H2O分子反应动力学研究

用213 nm激光光解CCl4产生CCl2自由基，用LP LIF技术测定了室温下基态CCl2自由基与H2O分子的反应速率常数为(5.45±0.95)×10－14 cm3•molecule－1•s－1.在G2MP2理论水平上计算了CCl2＋H2O反应的最低单重态势能面，揭示了插入与加成 消除两种反应机理，得到了三个可能的产物通道:HCl＋HClCO、HCl＋trans ClCOH以及HCl＋cis ClCOH.并用RRKM TST和传统过渡态理论计算了这三个通道的分支比及其温度效应.结果说明在低温下（273 K），插入机理的产物通道的分支比远大于加成 消除机理的产物通道， HCl＋HClCO是主要产物，分支比为77.4％，其次是HCl＋cis ClCOH，分支比为22.6％.而在高温下（3000 K），加成 消除机理的反应通道大于插入机理， HCl＋trans ClCOH分支比为82.3％.     

玉米芯水溶性多糖的分离纯化和抗凝血活性研究

从玉米芯中提取到水提水溶性粗多糖,通过乙醇分级、冻融、凝胶过滤层析,生物测定导向等手段,分离到一种能延长体外凝血时间,而且具有外源抗凝血功能的多糖CCⅢ.CCⅢ对活化部分凝血酶原时间(APTT)无显著影响,但可显著延长体外抗凝血时间(PT).将CCⅢ纯化,经糖组成分析、甲基化、高碘酸氧化、Smith降解和GC-MS分析,确定该多糖结构为:β-(1→4)Glc,(1→3)Xyl构成主链,Glc在6-O处有分枝.平均每10个糖残基有1个分枝,支链由β-(1→3)Xyl,(1→3)Glc构成.