Investigation of Ti/CuO interface by X-ray photoelectron spectroscopy and atomic force microscopy

The Ti/CuO interface has been studied by the techniques of X-ray photoelectron spectroscopy and atomic force microscopy. Thin films of titanium were deposited on a CuO substrate at room temperature by the e-beam technique. The photoelectron spectra of titanium and copper were found to exhibit significant chemical interaction at the interface. The titanium overlayer was observed to get oxidized to TiO₂, while the CuO was observed to get reduced to elemental copper. This chemical interaction was observed to occur until a thickness of 7 nm of the titanium overlayer. For thicknesses greater than this value, the presence of unreacted titanium in the sample was detected. Barrier characteristics at the Ti/CuO interface were also carried out for substrate temperatures of 300°C, 400°C, 500°C, and 600°C as a function of the titanium overlayer thickness. A linear trend in the barrier thickness of the overlayer was observed between 400°C and 600°C substrate temperatures. The atomic force microscopy micrographs of the unannealed samples depicted layer-by-layer growth of elemental titanium on copper. At the Ti/CuO interface in such samples, the micrographs exhibited island formation of TiO₂ corresponding to the Volmer-Weber growth model. This formation has been interpreted as the relaxation in the strain energy. The percentage coverage of the underlying substrate by the TiO₂ islands showed a linear trend for the thicknesses of the titanium overlayer investigated. The average size of these islands also showed a linear trend as a function of the thickness of the overlayer.     

Magnetoresistance anisotropy of a one-dimensional superconducting niobium strip

We investigated confinement effects on the resistive anisotropy of a superconducting niobium strip with a rectangular cross section. When its transverse dimensions are comparable to the superconducting coherence length, the angle dependent magnetoresistances at a fixed temperature can be scaled as R(theta,H) = R(H/Hctheta) where Hctheta =Hc0(cos2theta + gamma(-2)sin2theta)(-1/2) is the angular dependent critical field, gamma is the width to thickness ratio, and Hc0 is the critical field in the thickness direction at theta=0 degrees . The results can be understood in terms of the anisotropic diamagnetic energy for a given field in a one-dimensional superconductor.     

Stability Criteria for the Weyl m-Function

This paper presents a new approach to spectral theory for theSchrödinger Operator on the half-line. Solutions of nonlinearRiccati-type equations related to the Schrödinger equation at realspectral parameter are characterised by means of their clusteringproperties as is varied. A family of solutions exhibiting aso-called -clustering property is shown to imply precise estimatesfor the complex boundary value of the Weyl m-function and thespectral measure, and leads to an analysis of the absolutely continuouscomponent of the spectral measure in terms of stability criteria for thecorresponding Riccati equations.     

Enzyme-catalyzed synthesis of furanosyl nucleotides

A bacterial alpha-d-glucopyranosyl-1-phosphate thymidylyltransferase was found to couple four hexofuranosyl-1-phosphates, as well as a pentofuranosyl-1-phosphate, with deoxythymidine 5'-triphosphate, providing access to furanosyl nucleotides. The enzymatic reaction mixtures were analyzed by electrospray ionization mass spectrometry and NMR spectroscopy to determine the anomeric stereochemistry of furanosyl nucleotide products. This is the first demonstration of a nucleotidylyltransferase discriminating between diastereomeric mixtures of sugar-1-phosphates to produce stereopure, biologically relevant furanosyl nucleotides.     

1,5‐Asymmetric induction during nucleophilic additions to arenetricarbonylchromium complexes: tricarbonyl(η6‐1‐methyl‐4‐{spiro[(1R,2S)‐1,7,7‐trimethylbicyclo[2.2.1]heptane‐3,2′‐1,3‐dioxolan]‐2‐yloxy}benzene)chromium

The tricarbonylchromium unit bound to the arene ring of the chiral title complex, [Cr(C₁₉H₂₆O₃)(CO)₃], is rotated by ca 25° in agreement with the proposed mechanism for 1,5‐asymmetric induction of nucleophilic attack.     

Development of a practical Buchwald-Hartwig amine arylation protocol using a conveniently prepared (NHC)Pd(R-allyl)Cl catalyst

Continuing efforts to establish a more general "user-friendly" protocol for the palladium-catalysed arylation of amines (Buchwald-Hartwig reaction) are described herein. Significant advances have been made through the use of the versatile (SIPr)Pd(methallyl)Cl complex in conjunction with the reliable base lithium hexamethyldisilazide (LHMDS).     

Interpreting ultrafast molecular fragmentation dynamics with ab initio electronic structure calculations

High-level ab initio electronic structure calculations are used to interpret the fragmentation dynamics of CHBr(2)COCF(3), following excitation with an intense ultrafast laser pulse. The potential energy surfaces of the ground and excited cationic states along the dissociative C-CF(3) bond have been calculated using multireference second order perturbation theory methods. The calculations confirm the existence of a charge transfer resonance during the evolution of a dissociative wave packet on the ground state potential energy surface of the molecular cation and yield a detailed picture of the dissociation dynamics observed in earlier work. Comparisons of the ionic spectrum for two similar molecules support a general picture in which molecules are influenced by dynamic resonances in the cation during dissociation.     

Synthesis of a key precursor for orienticin C and model study on ruthenium-mediated macrocyclization

A tripeptido--arene--ruthenium complex was prepared as a key precursor for the projected synthesis of orienticin C, demonstrating that the cyclopentadienylruthenium moiety can be attached to a chloroarene in the presence of multiple functionality. The ruthenium-mediated intramolecular SNAr reaction for formation of the required diaryl ether linkage was successfully tested on a model system.     

Gelation Kinetics and Mechanical Properties of Thiol-Tetrazole Methylsulfone Hydrogels Designed for Cell Encapsulation

Hydrogel precursors that crosslink within minutes are essential for the development of cell encapsulation matrices and their implementation in automated systems. Such timescales allow sufficient mixing of cells and hydrogel precursors under low shear forces and the achievement of homogeneous networks and cell distributions in the 3D cell culture. The previous work showed that the thiol-tetrazole methylsulfone (TzMS) reaction crosslinks star-poly(ethylene glycol) (PEG) hydrogels within minutes at around physiological pH and can be accelerated or slowed down with small pH changes. The resulting hydrogels are cytocompatible and stable in cell culture conditions. Here, the gelation kinetics and mechanical properties of PEG-based hydrogels formed by thiol-TzMS crosslinking as a function of buffer, crosslinker structure and degree of TzMS functionality are reported. Crosslinkers of different architecture, length and chemical nature (PEG versus peptide) are tested, and degree of TzMS functionality is modified by inclusion of RGD cell-adhesive ligand, all at concentration ranges typically used in cell culture. These studies corroborate that thiol/PEG-4TzMS hydrogels show gelation times and stiffnesses that are suitable for 3D cell encapsulation and tunable through changes in hydrogel composition. The results of this study guide formulation of encapsulating hydrogels for manual and automated 3D cell culture.     

Thermal degradation in a trimodal poly(dimethylsiloxane) network studied by (1)H multiple quantum NMR

Thermal degradation of a filled, cross-linked siloxane material synthesized from poly(dimethylsiloxane) chains of three different average molecular weights and with two different cross-linking species has been studied by (1)H multiple quantum (MQ) NMR methods. Multiple domains of polymer chains were detected by MQ NMR exhibiting residual dipolar coupling () values of 200 and 600 Hz, corresponding to chains with high average molecular weight between cross-links and chains with low average molecular weight between cross-links or near the multifunctional cross-linking sites. Characterization of the values and changes in distributions present in the material were studied as a function of time at 250 degrees C and indicate significant time-dependent degradation. For the domains with low , a broadening in the distribution was observed with aging time. For the domain with high , increases in both the mean and the width in were observed with increasing aging time. Isothermal thermal gravimetric analysis reveals a 3% decrease in weight over 20 h of aging at 250 degrees C. Degraded samples also were analyzed by traditional solid-state (1)H NMR techniques, and off-gassing products were identified by solid-phase microextraction followed by gas chromatography-mass spectrometry. The results, which will be discussed here, suggest that thermal degradation proceeds by complex competition between oxidative chain scissioning and postcuring cross-linking that both contribute to embrittlement.