Evolution and potential of the BiAS procedure for the determination of non-ionic surfactants

The evolution of the BiAS procedure is reviewed and its standard recommended version was compared with the modified version combined with the indirect tensammetric method (BiAS-ITM). New applications of the use of BiAS-ITM for the determination of nonionic surfactants (in the presence of hydrocarbons or adsorbed on particles) and polyethylene glycols were discussed.     

Reversible storage of molecular hydrogen by sorption into multilayered TiO2 nanotubes

The sorption of hydrogen between the layers of the multilayered wall of nanotubular TiO2 was studied in the temperature range of -195 to 200 degrees C and at pressures of 0 to 6 bar. Hydrogen can intercalate between layers in the walls of TiO2 nanotubes forming host-guest compounds TiO2 x xH2, where x < or = 1.5 and decreases at higher temperatures. The rate of hydrogen incorporation increases with temperature and the characteristic time for hydrogen sorption in TiO2 nanotubes is several hours at 100 degrees C. The rate of intercalate formation is limited by the diffusion of molecular hydrogen inside the multilayered walls of the TiO2 nanotube. 1H NMR-MAS and XRD data confirm the incorporation of hydrogen between the layers in the walls of TiO2 nanotubes. The nature and possible applications of the observed intercalates are considered.     

Protective properties of redox polymer film deposited on stainless steel

We propose a novel composite organic-inorganic coating in the form of a redox polymer film for protection of stainless steel against general corrosion in strong acid medium (2 M H₂SO₄). We utilize an anion exchange polymer, protonated poly(4-vinylpyridine), into which hexacyanoferrate anions have been introduced. Owing to the presence of Fe(CN)₆^3–/4– at the interface formed by the film and the steel, a sparingly soluble metal hexacyanoferrate (mostly Prussian blue, PB) is formed as an overcoating on the steels surface, presumably on the passive (metal oxide) layer. The redox polymer film on the steel seems to act as a composite three-dimensional bilayer-type coating in which hexacyanoferrate(III,II) anions (that are capable of effective charge storage) exist in the outer portions of the film, whereas the inner PB layer improves the systems overall adherence and stability. By analogy to a conducting polymer (e.g. polyaniline, polypyrrole), introduction of the redox polymer composite film leads to stabilization of the steel substrates potential within the passive range.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Spektrochemische Bestimmung von Spurenelementen in Eisen und Stahl

Zusammenfassung Ein zweites spektrochemisches Verfahren zur Bestimmung von Silber, Blei, Zinn, Wismut, Tellur, Arsen und Antimon in Eisen und Stahl wurde entwickelt. Auch hier wird die spektrographische Analyse nach Auflösen der Probe in Salpetersäure und Eindampfen der Lösung zur Trockne durchgeführt. Die leichtflüchtigen Elemente werden ohne Puffer durch Anwendung eines inhomogenen Magnetfeldes und einer zweckmäßigen Elektrodenform störungsfrei und mit guter Reproduzierbarkeit bestimmt. Dabei sind die unteren Bestünmungsgrenzen gleich oder niedriger als die anderer spektrochemischer Methoden, die bisher beschrieben wurden. Das Verfahren zeichnet sich durch Schnelligkeit und Einfachheit aus.

---

Spectrochemical determination of trace elements in iron and steelPart II. determination of Ag, Pb, Sn, Bi, Te, As and Sb by using an inhomogeneous magnetic field

A second spectrochemical method for the determination of silver, lead, tin, bismuth, tellurium, arsenic and antimony in iron and steel has been developed. Here also the spectrographic analysis is to be carried out after dissolution of the sample in nitric acid and evaporation of the solution to dryness. Without buffer, the easily volatile elements are determined free of interferences and with good reproducibility by using an inhomogeneous magnetic field and electrodes of an appropriate form. The lower limits of determination are the same or lower than those obtained by any other spectrochemical method described. The method is characterised by rapidity and simplicity of procedure.

---

---

Teil I: diese Z. 254, 16 (1971).     

The unrestricted natural orbital-restricted active space method: methodology and implementation

The full configuration interaction method in the space of fractionally occupied unrestricted natural orbitals (UNO-CAS method) is extended to excited states as well as to strongly correlated and reactive systems with large active spaces. This is accomplished by␣using restricted active space (RAS) wave functions introduced by Olsen et al. [(1988) J Chem Phys 89: 2185] and using the UNOs without the expensive orbital optimization step. In RAS, the space of active orbitals is subdivided into three groups: a group with essentially doubly occupied orbitals (RAS1), the usual CAS space (RAS2), and a space with weakly occupied active orbitals (RAS3). We select these spaces on the basis of the occupation numbers of the UNOs. All possible electron distributions are allowed in the usual CAS space, but the number of vacancies is limited in RAS1 and the number of electrons is limited in RAS3. We discuss an efficient algorithm for generating a RAS wave function. This is based on the Handy-Knowles determinantal expansion with an addressing scheme adopted for the restricted expansion. Results for both ground and excited states of azulene and free base porphyrin are presented. Received: 16 July 1998 / Accepted: 7 August 1998 / Published online: 19 October 1998     

Vollständige und B-vollständige topologische Vektorgruppen Graphensätze und Open-Mapping Theorems

We are studying complete and B-complete topological vector groups. These Objects have been introduced by P. Kenderov [6] and D. A. Raikov [11]. They form a category TVG intermediate to the categories of topological Abelian groups and topological vector spaces and are close enough to the last one to give many useful applications to it. We first consider the problem of completion in the most used subcategories of TVG. A special functor allows to play back permanence property questions of completeness in locally convex vector groups to the same questions for locally convex vector spaces. Some examples of complete locally convex vector groups follow. We then unify some differently defined notions of B-completeness and generalize well known theorems concerning B-complete locally convex topological vector spaces to locally convex topological vector groups. Barrelledness concepts introduced in 9 and a special functor constructed in section 6 are used to formulate analogues of the closed graph and open mapping theorem for locally convex vector groups. The remainder of the note is left for applications to locally convex vector spaces. Many theorems about 1^p-sums of normed spaces are proved, as well as the B-completeness of a vast class of locally convex vector spaces including the spaces and of Köthe ([7], §13, No 5,6).     

Magnetic resonance study of annealed and rinsed N-doped TiO2 nanoparticles

Nanoparticles of nitrogen-modified TiO₂ (N-doped TiO₂) calcined at 300°C and 350°C, have been prepared with and without water rinsing. Samples were characterized by x-ray diffractrometry (XRD) and optical spectroscopy. The electron paramagnetic resonance (EPR) spectra from centers involving oxygen vacancies were recorded for all samples. These could be attributed to paramagnetic surface centers of the hole type, for example to paramagnetic oxygen radicals O^?, O₂ ^? etc. The concentration of these centers increased after water rising and it further increased for samples annealed at higher temperature. Additionally, for samples calcined at 300°C, and calcined at 350°C and rinsed, the EPR spectra evidenced the presence of magnetic clusters of Ti³⁺ ions. The photocatalytic activity of samples was studied towards phenol decomposition under unltraviolet-visible (UV-Vis) irradiation. It was found that, in comparison to the starting materials, the rinsed materials showed increased photocatalytic activity towards phenol oxidation. The light absorption (UV-Vis/DRS) as well as surface Fourier transform infrared/diffuse reflectance spectroscopy (FTIR/DR) studies confirmed a significantly enhanced light absorption and the presence of nitrogen groups on the photocatalysts surfaces, respectively. A significant increase of concentration of paramagnetic centers connected with oxygen vacancies after water rising has had an essential influence on increasing their photocatalytic activity.      

Comparative studies of Pd, Ru, Ni, Cu/ZnAl2O4 catalysts for the water gas shift reaction

The activity of monometallic Pd, Ru, Ni and Cu catalysts supported on spinel ZnAl₂O₄ for water gas shift reaction (WGS) was investigated. The physicochemical properties of each catalyst was studied by XRD, TPR, BET and chemisorption methods. The highest activity was obtained for Cu/ZnAl₂O₄ among the catalysts tested. The activation process carried out in a reducing atmosphere 5%H₂-95%Ar in the case of Cu/ZnAl₂O₄ system lead to the catalytic activity improvement. In the case of copper catalysts, the water gas shift reaction proceeded by the redox surface mechanism between Cu⁰/Cu⁺. The PdZn alloy formation after reduction at 350°C was shown.      

Coffee-ring effects in laser desorption/ionization mass spectrometry

This report focuses on the heterogeneous distribution of small molecules (e.g. metabolites) within dry deposits of suspensions and solutions of inorganic and organic compounds with implications for chemical analysis of small molecules by laser desorption/ionization (LDI) mass spectrometry (MS). Taking advantage of the imaging capabilities of a modern mass spectrometer, we have investigated the occurrence of “coffee rings” in matrix-assisted laser desorption/ionization (MALDI) and surface-assisted laser desorption/ionization (SALDI) sample spots. It is seen that the “coffee-ring effect” in MALDI/SALDI samples can be both beneficial and disadvantageous. For example, formation of the coffee rings gives rise to heterogeneous distribution of analytes and matrices, thus compromising analytical performance and reproducibility of the mass spectrometric analysis. On the other hand, the coffee-ring effect can also be advantageous because it enables partial separation of analytes from some of the interfering molecules present in the sample. We report a “hidden coffee-ring effect” where under certain conditions the sample/matrix deposit appears relatively homogeneous when inspected by optical microscopy. Even in such cases, hidden coffee rings can still be found by implementing the MALDI-MS imaging technique. We have also found that to some extent, the coffee-ring effect can be suppressed during SALDI sample preparation.