Discontinuous alkylation of diphenylamine with nonene for maximum catalyst utilization

This study examines the alkylation of diphenylamine (DPA) with nonene (NON) in a liquid phase catalyzed by acid-treated clay-based catalysts from commercial suppliers (Fulcat 22B, Nobelin MM, and Jeltar 300). Alkylations were conducted to achieve the highest possible selectivity of diisononyldiphenylamine (DNDPA), low selectivity of monoisononyldiphenylamine, and a maximum triisononyldiphenylamine yield of 4%. This study also examines the reaction conditions to selectively form dialkylated diphenylamine from DPA and NON in a batch reactor. Repeated use of the catalyst during the alkylation of DPA with NON was also investigated. Catalyst deactivation takes place during the alkylation of each batch and intensifies with repeated catalyst use, resulting in low DNDPA selectivity. The regenerated catalyst was sufficiently active only until the regeneration of the first and second batches. After the third batch, the catalyst’s selectivity for DNDPA was very low, and its reuse in the alkylation of DPA with NON was not efficient. Therefore, to achieve the maximum length of catalyst activity, the fresh catalyst was gradually added to the used catalyst from a previous batch, thus maintaining a high activity of eight batches. The reduction in catalyst activity was probably caused by the irreversible adsorption of substances on the surface, a loss of microporous structure, and a loss of surface acidity. DPA or alkylated products are adsorbed on the surface oxygen of the catalyst through nitrogen and form nitro formations. The fresh and regenerated catalysts were characterized by their surface area, surface acidity, pore size distribution, and pore volume.     

Convenient Synthesis of 6-Bromo-1,2,3,4-tetrahydroisoquinoline and 3-Methoxy-1,2,3,4-tetrahydro-[2,7]-naphthyridine via Reductive Amination of Schiff's Bases

Synthesis of 7-bromo-1,2,3,4-tetrahydroisoquinoline and 6-methoxy-1,2,3,4-tetrahydro-[2,7]-naphthyridine via lithiation of 2-methylarylidene-tert-butylamines, followed by formylation, reductive amination in one-pot, and removal of the tert-butyl group from the nitrogen, is described.     

Unsymmetrical Benzotristhiazole: A New Electron‐Withdrawing Core for Octupolar Chromophores

A six‐step synthesis of the unsymmetrical trimethylbenzotristhiazole has been developed. Starting from 2‐methylbenzothiazole following nitration, reduction, acetylation, thionation, and twofold cyclization, the desired trimethylbenzotristhiazole was obtained in good yield. Its condensation with donor‐substituted benzaldehydes presents the way to new octupolar chromophores. The attempt to synthesize such benzotristhiazole from dinitroaniline failed; this procedure afforded a new benzimidazole derivative.     

Ultrasensitive impedimetric lectin based biosensor for glycoproteins containing sialic acid

We report on an ultrasensitive label-free lectin-based impedimetric biosensor for the determination of the sialylated glycoproteins fetuin and asialofetuin. A sialic acid binding agglutinin from Sambucus nigra I was covalently immobilised on a mixed self-assembled monolayer (SAM) consisting of 11-mercaptoundecanoic acid and 6-mercaptohexanol. Poly(vinyl alcohol) was used as a blocking agent. The sensor layer was characterised by atomic force microscopy, electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy. The biosensor exhibits a linear range that spans 7 orders of magnitude for both glycoproteins, with a detection limit as low as 0.33 fM for fetuin and 0.54 fM for asialofetuin. We also show, by making control experiments with oxidised asialofetuin, that the biosensor is capable of quantitatively detecting changes in the fraction of sialic acid on glycoproteins. We conclude that this work lays a solid foundation for future applications of such a biosensor in terms of the diagnosis of diseases such as chronic inflammatory rheumatoid arthritis, genetic disorders and cancer, all of which are associated with aberrant glycosylation of protein biomarkers.

CZE study on adsorption processes of aliphatic and aromatic amines on PMMA chip

Adsorption processes on a PMMA chip linked with CZE separations of a group of 13 aliphatic and aromatic mono‐ and di‐amines were studied. Due to the lack of chromophores within aliphatic amines, contact conductivity detection implemented directly onto the chip was used for monitoring of cationic CZE separations. To prevent an adsorption of studied amines to the chip channels, the surface of PMMA chip was modified by dynamic coating. Different surface modifiers, such as aliphatic oligoamines (diethylenetriamine and triethylenetetramine), were added to the BGE solutions filling the chip channels. The effect of various concentrations of surface modifiers on peak profiles and separation parameters of amines was monitored. Of these, mainly, aliphatic di‐amines and aromatic mono‐amines adversely affected the CZE resolution of a whole group of analytes by their strong adsorption to the chip channels. A propionate BGE with pH 3.2 containing 100 μM triethylenetetramine and 25 mM 18‐crown‐6‐ether was found suitable for CZE resolution of 12 from a total of 13 amines studied. Simple dynamic modification of the surface of PMMA chip enabled fast (analysis time lasted 9 min), sensitive (sub‐μM LODs reached) and reproducible (1–3% RSD of the peak areas) CZE analysis of the aliphatic and aromatic amines.     

Synthesis and Characterization of the Crystalline Methyl α-Glycoside of the Repeating Unit of the O-Polysaccharide of Vibrio Cholerae O:1

Abstract

There are more than eighty serotypes of Vibrio cholerae, all causing disease with symptoms of Asian cholera. Systematic prevention of cholera by immunization has not yet been achieved because of a lack of a protective vaccine. Vibrio cholerae 0:1 Gramnegative bacteria occur as two immunologically distinct strains: Ogawa and Tnaba. The lipopolysaccharide (LPS) of both strains seem to contain the same 0-polysaccharide antigen consisting^3,4 of (1+2)-a-linked 4-amino-4,6-dideoxy-a-D-mannopyranosyl residues the amino groups of which are acylated with 3-deoxy-L-glycero-tetronic acid. Although the chemical structure of the 0-polysaccharides has been known5 since 1979, the synthesis of its monomeric repeating unit was reported only in 1988.     

The Reaction of Methyl 2,4,6-Tri-0-benzoyl-3-0-benzyl-β-D-galactopyranoside with 1,1-Dichloromethyl Methyl Ether

When methyl 2,4,6-tri-0-benzoyl-3-0-benzyl-β-D-galacto-pyranoside (JO is treated in purified chloroform at 55-60′ with excess of dichloromethyl methyl ether in the presence of a catalytic amount of freshly fused zinc chloride for 1 h the corresponding α-glycosyl chloride 2 can be isolated by column chromatography in 75-80% yield. Compound 2 is an important intermediate in the synthesis of oligosaccharides containing a glycosyl-3-0-galactosyl sequence. Under the described reaction conditions the conversion 1 - 2 is accompanied by a slow anomerisation of 1 to give methyl 2,4,6-tri-0-benzoyl-3-0-benzyl-α-D-galactopyranoside. Prolonged treatment of 2 with the used excess of the reagent results in complete debenzylation of the substrate and the conversion of the putative 2,4,6-tri-O-benzoyl-α-D-galactopyranosyl chloride into the corresponding 3-0-formyl and 3-0-dichloromethyl derivatives.     

13C Nmr Spectra of Methyl Deoxyfluoro-β-D-Galactopyranosides and Their Per-O-Acetyl Derivatives

Abstract

Methyl 6-deoxy-6-fluoro-β-d-galactopyranoside has been obtained by treatment of methyl β-d-galactopyranoside with diethyl-aminosulfur trifluoride (DAST). Improvements over the existing syntheses of methyl 2, 3-di-O-benzyl-4-deoxy-4-fluoro-β-d-galacto-pyranoside from the corresponding 6-O-substituted 4-O-arylsul-fonyl-d-gluco derivatives are described. ¹³C NMR spectra of a series of methyl deoxyfluoro-β-d-galactopyranosides and their per-O-acetyl derivatives have been measured. The data obtained can be used as an aid for the interpretation of ¹³C NMR spectra of deoxyfluoro-β-d-galactopyranose-containing oligosaccharides and related substances.     

Phase Transfer Promoted Ruthenium Oxide Oxidations of Carbohydrates II

ABSTRACT

The use of a phase transfer catalyst, benzyltriethylammonium chloride (BTEAC), is described in conjunction with the ruthenium dioxide/periodate : water/chloroform system for the oxidation of carbohydrate alcohols to the corresponding ketone, aldehyde, or carboxylic acid. The method was found to be applicable to carbohydrates appropriately protected as acetals, ethers, or containing a benzoyloxy group not positioned to readily undergo β-elimination. While the method was very suitable for the oxidation of carbohydrate secondary alcohols to ketones, it was found to be less suitable for the oxidation of a carbohydrate primary alcohol to the corresponding aldehyde or carboxylic acid. Evidence presented suggests that under the mildly basic conditions of the reaction, ruthenium tetraoxide is converted to ruthenate and perruthenate ions in the aqueous solution and then the perruthenate ion is carried by the phase transfer catalyst into the organic layer where oxidation of the substrate occurs. A number of examples illustrating the scope of the method are presented.     

Left and right centers in quasi-Poisson geometry of moduli spaces

We introduce left central and right central functions and left and right leaves in quasi-Poisson geometry, generalizing central (or Casimir) functions and symplectic leaves from Poisson geometry. They lead to a new type of (quasi-)Poisson reduction, which is both simpler and more general than known quasi-Hamiltonian reductions. We study these notions in detail for moduli spaces of flat connections on surfaces, where the quasi-Poisson structure is given by an intersection pairing on homology.