Classification of wine distillates using multivariate statistical methods based on their direct GC-MS analysis

This work describes a novel methodology for the recognition of brandies based on direct injection of a raw sample followed by GC-MS analysis. Direct injection was chosen for its simplicity and the fact that the composition of the samples analysed remains unchanged compared to original brandy. The repeatability of the analytical procedure was evaluated by a comparison of the peak areas for randomly selected compounds obtained from 10 parallel measurements. A novel chemometric procedure was investigated in order to separate the samples studied on the basis of their geographical origin, processing technology or maturation time. In this procedure, a principal component analysis was applied to full chromatograms to select the time interval that shows the significant differences between the samples studied. It was shown that the chromatogram recorded at 36–39 min bore the maximal differences, hence it could be used to classify the brandy samples. The chromatographic peaks found within this time interval were identified and their peak areas determined. These compounds could be used as specific markers for determining geographical origin or processing technology.     

Effect of Cold Atmospheric Pressure Plasma on Maize Seeds: Enhancement of Seedlings Growth and Surface Microorganisms Inactivation

Cold atmospheric pressure ambient air plasma generated by Diffuse Coplanar Surface Barrier Discharge (DCSBD) was investigated for inhibition of native microbiota and potentially dangerous pathogens (Aspergillus flavus, Alternaria alternata and Fusarium culmorum) on the maize surface. Moreover, the improvement of germination and growth parameters of maize seeds was evaluated. Maize (Zea mays L.; cv. Ronaldinio), one of the most important cultivated crops worldwide, was selected as the research material. Electrical measurements confirmed the high volume power density (80 W cm^?3) of DCSBD plasma. Non-equilibrium plasma state evaluated using optical emission spectroscopy showed values of vibrational and rotational temperature (2700?±?300) K and (370?±?75) K, respectively. Changes on the plasma treated seeds surface were studied by water contact angle measurement, scanning electron microscope analysis and Fourier transform infrared spectroscopy. A complete devitalisation of native microbiota on the surface of seeds was observed after a short treatment time of 60 s (bacteria) and 180 s (filamentous fungi). The plasma treatment efficiency of artificially contaminated maize seeds was estimated as a reduction of 3.79 log (CFU/g) in F. culmorum after a 60-s plasma treatment, 4.21 log (CFU/g) in A. flavus and 3.22 log (CFU/g) in A. alternata after a 300-s plasma treatment. Moreover, the obtained results show an increase in wettability, resulting in a better water uptake and in an enhancement of growth parameters. The investigated DCSBD plasma source provides significant technical advantages and application potential for seed surface finishing without the use of hazardous chemicals.     

Study of radon exhalation from the soil

The influence of meteorological parameters on radon exhalation rate was analyzed. The analyses show a significant influence of precipitation on radon exhalation rate. The highest exhalation rate was found during dry periods and the lowest during the periods of strong precipitation. We also tested two different types of detectors for the measurement of radon exhalation rate—the ionization chamber (AlphaGUARD) and the scintillation chamber of Lucas type. The exhalation rates measured by these detectors were in a good agreement. Likewise, there was an agreement in radon exhalation rates determined from short term and long term increases in radon activity concentration.     

Protective effect of mitochondrially targeted antioxidant MitoQ on oxidatively stressed fibroblasts

3T3 and VH10 cells were subjected to oxidative damage by hydroxyl radicals generated from Cu(II) ions and ascorbate. The presence of reactive oxygen and nitrogen species in cells was determined using fluorescent dyes. MitoQ—a mitochondrially targeted antioxidant—was examined to prevent cell death and was compared with trolox as a reference standard serving as an antioxidant. MitoQ at lower concentrations (up to 500 nM) prevented damage of mitochondria and thereby increased viability of cells. However, at higher concentrations (over 500 nM) MitoQ decreased the viability of both strains of cells. The last observation indicates that the application of MitoQ should be evaluated also from the point of its cell-destructive potential.     

Solution processable diketopyrrolopyrrole semiconductor: towards bio-electronic applications

In this paper, the possibility to use diketopyrrolopyrrole (DPP) for the construction of electrical devices designed to interact with animal cells was studied. For this purpose, the biocompatibility and electrical properties of the selected DPP derivative (3,6-bis(5-(benzofuran-2-yl)thiophen-2-yl)-2,5-bis(2-ethyl-hexyl)pyrrolo[3,4-c]pyrrole-1,4-dione) [referred as DPP(TBFu)₂] were researched. The electrical properties were studied using model organic field-effect transistors. Mainly investigated was under what conditions maximum charge carrier mobility can be achieved. Using the cumulative effect of self-assembled monolayers on dielectrics and electrodes and detailed thermal analysis of the DPP, a higher charge carrier mobility was achieved than has been previously reported (5.5?×?10^?3 cm² V^?1 s^?1). The biocompatibility was studied based on a culture of 3T3 fibroblasts. This research revealed that DPP(TBFu)₂ can be used in applications involving direct contact with living animal cells. The conclusions found with these model devices can be applied to components suitable for biosensing applications, e.g., water- or electrolyte-gated organic field-effect transistors.     

Simultaneous Determination of 11 Elements in Fly Ash by Inductively Coupled Plasma Orthogonal Acceleration Time-of-Flight Mass Spectrometry After Closed-Vessel Microwave-Assisted Extraction with Ammonium Fluoride

A method for simultaneous multi-element analysis of fly ash samples by inductively coupled plasma orthogonal acceleration time-of-flight mass spectrometry (oaTOF-ICP-MS) after closed-vessel microwave extraction with ammonium fluoride was introduced here. Corrosive and/or toxic acids like HF, HCl or HClO₄, as well as HNO₃, which are commonly used during sample preparation of the fly ash samples, are avoided in this method. The spectral effects due to the formation of different Cl, Na, K, Ca, Mg-containing polyatomic species interfering with the determination of a number of elements like As, Se or Ni during the oaTOF-ICP-MS analysis are negligible. Under the optimum experimental extraction conditions evaluated using a fractional factorial design (10 mg of the sample extracted with 5 mL of 140 g/L NH₄F for 10 min at 200°C), analysis of the resulting supernatant with Rh as an internal standard enabled precise and accurate simultaneous determination of 11 elements (Li, Be, Ni, As, Se, Rb, Sb, Cs, W, Tl and U) at trace and ultratrace levels. The accuracy was assessed by analysing two certified reference materials, namely Fine Fly Ash CTA-FFA-1 and Constituent Elements in Coal Fly Ash Standard Reference Material® 1633b. The precision of the reported method was better than 10%.     

Bifunctional iminophosphorane superbases: Potent organocatalysts for enantio- and diastereoselective Michael addition reactions

Bifunctional iminophosphorane (BIMP) organocatalysts catalyze the enantio- and diastereoselective Michael additions of high pK_a cyclic malonamate ester pro-nucleophiles to nitroalkenes with reactivity profiles of up to 3 orders of magnitude greater than tertiary amine bifunctional Brønsted base/(thio)urea organocatalysts. The unrivalled performance of the BIMPs allows reaction times of challenging reactions to be slashed from weeks to minutes and has enabled new flow chemistry applications using polystyrene-supported versions contained within a flow reactor.     

A nonafluoro nucleoside as a sensitive 19f NMR probe of nucleic acid conformation

A nucleoside carrying a perfluorinated tert-butyl group ( 4) was prepared by a Sonogashira coupling of 5-iodo-2'-deoxyuridine with 4,4,4-trifluoro-3,3-bis(trifluoromethyl)-1-butyne in nearly quantitative yield and subsequently incorporated into DNA oligomers. Thermal denaturation studies showed that 4 had a negligible effect on duplex stability when compared to thymidine. Transition from single strand to duplex was monitored by (19)F NMR spectroscopy at micromolar concentrations of oligomers, demonstrating the sensitivity of 4 as an NMR reporter nucleoside.