Application of a contactless conductometric detector for the simultaneous determination of small anions and cations by capillary electrophoresis with dual-opposite end injection

A contactless conductometric detection (CCD) system for capillary electrophoresis (CE) with a flexible detection cell was applied for the simultaneous determination of small anions and/or cations in rain, surface and drainage water samples. The applied frequency, the amplitude of the input signal, the electrolyte conductivity and electrode distance were found to be the most significant factors affecting the detection sensitivity. 2-(N-Morpholino)ethanesulfonic acid/histidine-based (MES/His) electrolytes were used for direct conductivity detection of anions and cations, while ammonium acetate was selected for indirect conductivity determination of alkylammonium salts. For the simultaneous separation procedure, involving dual-opposite end injection, an electrolyte consisting of 20 mM MES/His, 1.5 mM 18-crown-6 and 20 microM cetyltrimethylammonium bromide provided baseline separation of 13 anions and cations in less than 6 min. The detection limits achieved were 7-30 micrograms/l for direct conductometric detection of various common inorganic cations and anions, excluding F- (62 micrograms/l) and H2PO4- (250 micrograms/l), and 35-178 micrograms/l for indirect conductometric detection of alkyl ammonium cations. The developed electrophoretic method with conductometric detection was compared to ion chromatography.     

Interaction of porphyrins with a dendrimer template: self-aggregation controlled by pH

The interaction between self-aggregated porphyrins such as 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS) and 5,10,15,20-tetrakis(4-phosphonatophenyl)porphyrin (TPPP), and a generation 5 (G5) PAMAM dendrimer template is governed by minute differences of porphyrin acido-basic properties. While at neutral pH both monomeric TPPS and TPPP form complexes with G5, decreasing pH did not lead to porphyrin ring protonation (pK(a) approximately 5) but rather to the preferential formation of H-aggregates (probably H-dimers), most likely due to protonation of the G5. Upon further acidification of the solution, this face-to-face orientation of the porphyrin units is being converted to edge-to-edge aligned J-aggregates with a tightly defined structure. This process starts by protonation of the porphyrin ring at pH below 2.3 and 2.8 for TPPS and TPPP, respectively. The AFM imaging of porphyrin/G5 nanostructures obtained at pH 0.7 shows the formation of long nanorods of TPPS with partially aggregated G5 and small aggregates of TPPP connected to individual G5 molecules.     

Fast ion chromatography of inorganic anions and cations on a lysine bonded porous silica monolith

A 0.46 cm x 10.0 cm silica monolith column was modified through the in situ covalent attachment of lysine (2,6-diaminohexanoic acid) groups. Due to the zwitterionic nature of the resultant stationary phase, the modified monolithic column contained both cation and anion exchange capacity. In the case of cation exchange, the capacity was found to be relatively low at between 5 and 6.5 micromoles Me2+ per column. However, as expected, the lysine monolith exhibited a higher anion exchange capacity at 12-13 micromoles A- per column (at pH 3.0), which was found to be dependent upon column pH, due to the dissociation of the weak acid carboxylic acid groups. High-performance separations of transition metal cations and inorganic anions were achieved using the modified monolith, with the effects of eluent concentration, pH and flow rate evaluated. Using elevated flow rates of up to 5 mL/min the separation of nitrite, bromate, bromide, nitrate, iodide and thiocyanate was possible in approximately 100 s with peak efficiencies of between 50 and 100,000 N/m and retention time %RSD of under 0.3%.     

Ion-chromatographic determination of chromium (VI)

Summary A simple ion-chromatographic method has been developed for the selective determination of chromium (VI) using UV-photometric detection. The anion exchanger was based on a matrix of a 2-hydroxyethyl-methacrylate copolymer; the mobile phase consisted of phosphate buffer and sodium perchlorate. The relative standard deviation was 2.26%. Application was made to waste waters of the metallurgical industry.     

Concrete quantum logics with covering properties

LetL be a concrete (=set-representable) quantum logic. Letn be a natural number (or, more generally, a cardinal). We say thatL admits intrinsic coverings of the ordern, and writeL C _n , if for any pairA, BL we can find a collection {C _i iI}, where cardI<n andC _i L for anyiI, such thatA B= _il C _i . Thus, in a certain sense, ifLC _n , then the rate of noncompatibility of an arbitrary pairA,BL is less than a given numbern. In this paper we first consider general and combinatorial properties of logics ofC _n and exhibit typical examples. In particular, for a givenn we construct examples ofL C _n+1\C _n . Further, we discuss the relation of the classesC _n to other classes of logics important within the quantum theories (e.g., we discover the interesting relation to the class of logics which have an abundance of Jauch-Piron states). We then consider conditions on which a class of concrete logics reduce to Boolean algebras. We conclude with some open questions.     

Correlation between Small-Angle X-ray Scattering spectra and apparent diffusion coefficients in the study of structure and interaction of sodium taurodeoxycholate micelles

Small-Angle X-ray Scattering (SAXS) and Dynamic Light Scattering (DLS) measurements were carried out on aqueous micellar solutions of the ionic biological detergent sodium taurodeoxycholate (NaTDC). Apparent diffusion coefficients (D(app)) and SAXS spectra of NaTDC 0.1 M solutions at different ionic strengths (0.1-0.3 M NaCl) were reported. A comparative analysis of SAXS spectra and D(app) data was performed to infer information on particle structure and interaction potential. Uniform particles with a spherical, an oblate, and a prolate symmetry were used to model the micelles in the data interpretation. A hard-core interaction shell of suitable thickness and a screened Coulomb potential of the electric double layer (EDL potential) were alternatively used to represent the long-range repulsive tail of the interaction potential. The Percus Yevick and the Rescaled Mean Spherical Approximation were applied. To compare the data of the two techniques, for each sample, a D(app) was calculated from the SAXS best-fitting geometrical parameters and interparticle structure factor of the micelles. Hence, a fitting procedure involving both the scattering and D(app) data was performed. The interpretation of SAXS spectra does not allow the discrimination between the oblate and the prolate symmetries of the aggregates. On the other hand, the comparison of calculated and experimental D(app) values indicates that the prolate ellipsoid is better suited to represent the micelle shape. Moreover, the agreement between calculated and experimental D(app) values is sensitively better at the lowest NaCl concentration when the EDL potential is used. A rodlike micellar growth and a progressive screening of the electrostatic interactions is testified by the trends of best-fitting parameters as a function of the added electrolyte.     

Diferratricarbaboranes of the subcloso-[(eta5-C5H5)2Fe2C3B8H11] type, the first representatives of the 13-vertex dimetallatricarbaborane series

Treatment of the [2-Cp-9-tBuNH-closo-2,1,7,9-FeC(3)B(8)H(10)] (1) ferratricarbollide (Cp = eta(5)-C(5)H(5) (-)) with Na(+) C(10)H(8) (-) in 1,2-dimethoxyethane (DME) at room temperature produced an air-sensitive transient anion with a tentatively identified nido-[tBuNH-CpFeC(3)B(8)H(10)](2-) constitution. In-situ reaction of this low-stability ion with [CpFe(CO)(2)I] or [CpFe(CO)(2)](2) generated three violet diferratricarbaboranes identified as paramagnetic subcloso complexes [4,5-Cp(2-)-4,5,1,6,7-Fe(2)C(3)B(8)H(11)] (2; yield 2 %), [4,5-Cp(2-)-4,5,1,7,12-Fe(2)C(3)B(8)H(11)] (3; yield 2 %), and [7-tBuNH-4,5-Cp(2-)-4,5,1,7,12-Fe(2)C(3)B(8)H(10)] (4; yield 14 %). These first representatives of the 13-vertex dimetallatricarbaborane family were characterized by EPR and IR spectroscopy, and mass spectrometry, and their structures were determined by X-ray diffraction analysis.     

Mixed valence in YBaFe(2)O(5)

YBaFe(2)O(5) has been synthesized by heating a nanoscale citrate precursor in a carefully controlled reducing environment. Successful synthesis of a single-phase sample can only be achieved in a narrow window of oxygen partial pressures and temperatures. YBaFe(2)O(5) adopts an oxygen-deficient perovskite-type structure, which contains double layers of corner sharing FeO(5) square pyramids separated by Y(3+) ions. At T(N) congruent with 430 K, tetragonal (P4/mmm) and paramagnetic YBaFe(2)O(5) orders antiferromagnetically (AFM) experiencing a slight orthorhombic distortion (Pmmm). Around this temperature, it can be characterized as a class-III mixed valence (MV) compound, where all iron atoms exist as equivalent MV Fe(2.5+) ions. The magnetic structure is characterized by AFM Fe-O-Fe superexchange coupling within the double layers and a ferromagnetic Fe-Fe direct-exchange coupling between neighboring double layers. Upon cooling below approximately 335 K, a premonitory charge ordering (2Fe(2.5+) --> Fe(2.5+delta) + Fe(2.5)(-delta)) into a class-II MV phase takes place. This transition is detected by differential scanning calorimetry, but powder diffraction techniques fail to detect any volume change or a long-range structural order. At approximately 308 K, a complete charge ordering (2Fe(2.5+) --> Fe(2+) + Fe(3+)) into a class-I MV compound takes place. This charge localization triggers a number of changes in the crystal, magnetic, and electronic structure of YBaFe(2)O(5). The magnetic structure rearranges to a G-type AFM structure, where both the Fe-O-Fe superexchange and the Fe-Fe direct-exchange couplings are antiferromagnetic. The crystal structure rearranges (Pmma) to accommodate alternating chains of Fe(2+) and Fe(3+) running along b and an unexpectedly large cooperative Jahn-Teller distortion about the high-spin Fe(2+) ions. This order of charges does not fulfill the Anderson condition, and it rather corresponds to an ordering of doubly occupied Fe(2+) d(xz) orbitals. Comparisons with YBaMn(2)O(5) and YBaCo(2)O(5) are made to highlight the impact of changing the d-electron count.     

The sorption of some radiocations on microporous titanosilicate ETS-10

The microporous titanosilicate ETS-10 synthesized from gel with following molar composition: 1.0 Na₂O: 1.49 SiO₂ : 0.2 TiO₂ : 0.6 KF : 1.28 HCl : 39.5 H₂O was subjected to sorption of radioactive cations ¹¹⁵Cd²⁺, ²⁰⁴Hg²⁺, ⁶⁰Co²⁺ and ¹³⁷Cs⁺ (M) from aqueous solution, in the absence of ionic competition. The uptake of these cations on the ETS-10 was compared by means of the distribution coefficient (K_d) versus contact time and sorption capacity (R) at equilibrium. The FT-IR spectra of M-ETS-10 sorption products exhibit a modification of the absorption band, principally at 381 cm^-1.     

Determination of vitamin C and preservatives in beverages by conventional capillary electrophoresis and microchip electrophoresis with capacitively coupled contactless conductivity detection

The separation and detection of commonly used preservatives (benzoate, sorbate) and vitamin C by both conventional CE and microchip electrophoresis with capacitively coupled contactless conductivity detection is presented. The separation was optimized by adjusting the pH-value of the buffer and the use of hydroxypropyl-beta-CD (HP-beta-CD) and CTAB as additives. For conventional CE, optimal separation conditions were achieved in a histidine/tartrate buffer at pH 6.5, containing 0.025% HP-beta-CD and 0.1 mM CTAB. LOD ranged from 0.5 to 3 mg/L (S/N = 3) and the RSDs for migration time and peak area were less than 0.1 and 2%, respectively. A considerable reduction of analysis time can be accomplished by using microchip electrophoresis without significant loss in sensitivity under optimal separation conditions. A histidine/tartrate buffer at pH 6.5, incorporating 0.06% HP-beta-CD and 0.25 mM CTAB, gave detection limits ranging between 3 and 10 mg/L and satisfactory reproducibilities of < or =0.4% for the migration time and < or =3.5% for the peak area. The methods developed are useful for the quantitative determination of food additives in real samples such as soft drinks and vitamin C tablets.