Functional artificial free-standing yeast biofilms

Here we report fabrication of artificial free-standing yeast biofilms built using sacrificial calcium carbonate-coated templates and layer-by-layer assembly of extracellular matrix-mimicking polyelectrolyte multilayers. The free-standing biofilms are freely floating multilayered films of oppositely charged polyelectrolytes and live cells incorporated in the polyelectrolyte layers. Such biofilms were initially formed on glass substrates of circular and ribbon-like shapes coated with thin layers of calcium carbonate microparticles. The templates were then coated with cationic and anionic polyelectrolytes to produce a supporting multilayered thin film. Then the yeast alone or mixed with various micro- and nanoparticle inclusions was deposited onto the multilayer composite films and further coated with outer polyelectrolyte multilayers. To detach the biofilms from the glass substrates the calcium carbonate layer was chemically dissolved yielding free-standing composite biofilms. These artificial biofilms to a certain degree mimic the primitive multicellular and colonial species. We have demonstrated the added functionality of the free-standing artificial biofilms containing magnetic, latex and silver micro- and nanoparticles. We have also developed "symbiotic" multicellular biofilms containing yeast and bacteria. This approach for fabrication of free-standing artificial biofilms can be potentially helpful in development of artificial colonial microorganisms composed of several different unicellular species and an important tool for growing cell cultures free of supporting substrates.     

Contact angles of colloid silica and gold particles at air-water and oil-water interfaces determined with the gel trapping technique

We have used the recently developed gel trapping technique (GTT) to determine the three-phase contact angles of submicrometer silica particles partially coated with octadecyl groups. The particles were spread at air-water and decane-water surfaces, and the aqueous phase was subsequently gelled with a nonadsorbing polysaccharide. The particles trapped at the surface of the aqueous gel were lifted by molding with curable poly(dimethylsiloxane) and imaged with scanning electron microscopy (SEM) to determine the particle contact line diameter which allows their contact angle at the original air-water or oil-water interface to be estimated. We report for the first time the use of the GTT for characterizing the contact angle of individual submicrometer particles adsorbed at liquid interfaces. The SEM images also reveal the structure of the particle monolayer at the interface and the structure of adsorbed particle aggregates. We have also determined the contact angles of agglomerated gold powder microparticles at the air-water and the decane-water interfaces. It was found that agglomerated gold particles demonstrate considerably higher contact angles than those on flat gold-coated surfaces.     

Preparation of aqueous gel beads coated by lipid bilayers

Novel giant liposome microcapsules have been fabricated based on aqueous gel cores encapsulated with a lipid bilayer. The method involves templating of lipid-stabilised water-in-oil emulsions after gelling the aqueous phase with a suitable hydrocolloid.     

157-nm laser micromachining of N-BK7 glass and replication for microcontact printing

We report etch-rate and probe-beam-deflection studies of N-BK7 glass ablated using a 157-nm F₂ laser. It is found that controllable material removal at the nanometre level is possible above an ablation threshold of 250 mJ cm^-2. Contact mask printing shows well-defined features can be micromachined in this glass with sub-micron resolution capability. Micro-features produced in this way have been replicated by polydimethylsiloxane (PDMS) moulding and the stamps used to print arrays of fluorescent molecules with sub-micron fidelity. PACS 45.55.Lt; 52.38.Mf; 87.80.Mj; 42.70.Ce     

Quantifying uncertainty in the measurement of arsenic in suspended particulate matter by Atomic Absorption Spectrometry with hydride generator

Arsenic is the toxic element, which creates several problems in human being specially when inhaled through air. So the accurate and precise measurement of arsenic in suspended particulate matter (SPM) is of prime importance as it gives information about the level of toxicity in the environment, and preventive measures could be taken in the effective areas. Quality assurance is equally important in the measurement of arsenic in SPM samples before making any decision. The quality and reliability of the data of such volatile elements depends upon the measurement of uncertainty of each step involved from sampling to analysis. The analytical results quantifying uncertainty gives a measure of the confidence level of the concerned laboratory. So the main objective of this study was to determine arsenic content in SPM samples with uncertainty budget and to find out various potential sources of uncertainty, which affects the results. Keeping these facts, we have selected seven diverse sites of Delhi (National Capital of India) for quantification of arsenic content in SPM samples with uncertainty budget following sampling by HVS to analysis by Atomic Absorption Spectrometer-Hydride Generator (AAS-HG). In the measurement of arsenic in SPM samples so many steps are involved from sampling to final result and we have considered various potential sources of uncertainties. The calculation of uncertainty is based on ISO/IEC17025: 2005 document and EURACHEM guideline. It has been found that the final results mostly depend on the uncertainty in measurement mainly due to repeatability, final volume prepared for analysis, weighing balance and sampling by HVS. After the analysis of data of seven diverse sites of Delhi, it has been concluded that during the period from 31^st Jan. 2008 to 7^th Feb. 2008 the arsenic concentration varies from 1.44 ± 0.25 to 5.58 ± 0.55 ng/m³ with 95% confidence level (k = 2).     

Fabrication of dipolar colloid particles by microcontact printing

A novel technique for preparation of dipolar colloid particles has been developed which is based on microcontact printing of films of water-insoluble ionic surfactants onto monolayers of colloid particles of opposite surface charge.     

Surface Roughening and Surface Self-diffusion. A Monte Carlo Simulation

A model for atom diffusion on surface is proposed, the energy barrier for surface self-diffusion as well as the barrier for diffusion along surface steps being considered. Using a Monte Carlo method, the equilibrium structure of crystal surface is obtained and its effect on the surface self-diffusion is studied. The mass transfer surface self-diffusivity D_s and the mean diffusion distance λ are calculated for different temperatures T. A nonlinear Arrhenius plot (log D vs l/T) is obtained. The maximal deviation from linearity occurs at roughening temperature.     

Cyborg cells: functionalisation of living cells with polymers and nanomaterials

Living cells interfaced with a range of polyelectrolyte coatings, magnetic and noble metal nanoparticles, hard mineral shells and other complex nanomaterials can perform functions often completely different from their original specialisation. Such "cyborg cells" are already finding a range of novel applications in areas like whole cell biosensors, bioelectronics, toxicity microscreening, tissue engineering, cell implant protection and bioanalytical chemistry. In this tutorial review, we describe the development of novel methods for functionalisation of cells with polymers and nanoparticles and comment on future advances in this technology in the light of other literature approaches. We review recent studies on the cell viability and function upon direct deposition of nanoparticles, coating with polyelectrolytes, polymer assisted assembly of nanomaterials and hard shells on the cell surface. The cell toxicity issues are considered for many practical applications in terms of possible adverse effects of the deposited polymers, polyelectrolytes and nanoparticles on the cell surface.     

Microscreening toxicity system based on living magnetic yeast and gradient chips

There is an increasing demand for easy and cost-effective methods to screen the toxicological impact of the growing number of chemical mixtures being generated by industry. Such a screening method has been developed using viable, genetically modified green fluorescent protein (GFP) reporter yeast that was magnetically functionalised and held within a microfluidic device. The GFP reporter yeast was used to detect genotoxicity by monitoring the exposure of the cells to a well-known genotoxic chemical (methyl methane sulfonate, MMS). The cells were magnetised using biocompatible positively charged PAH-stabilised magnetic nanoparticles with diameters around 15 nm. Gradient mixing was utilised to simultaneously expose yeast to a range of concentrations of toxins, and the effective fluorescence emitted from the produced GFP was measured. The magnetically enhanced retention of the yeast cells, with their facile subsequent removal and reloading, allowed for very convenient and rapid toxicity screening of a wide range of chemicals. This is the first report showing magnetic yeast within microfluidic devices in a simple bioassay, with potential applications to other types of fluorescent reporter yeast in toxicological and biomedical research. The microfluidic chip offers a simple and low-cost screening test that can be automated to allow multiple uses (adapted to different cell types) of the device on a wide range of chemicals and concentrations.     

Structural characteristics of different types of nanoparticles synthesised in mesomorphic metal alkanoates

The class of thermotropic ionic liquid crystals (LCs) of the metal alkanoates possesses a number of unique properties, such as intrinsic ionic conductivity, high dissolving ability and ability to form time-stable mesomorphic glasses. These ionic LCs can be used as nanoreactors for the synthesis and stabilisation of different types of nanoparticles (NPs). Thus, some semiconductors, metals and core/shell NPs were chemically synthesised in the thermotropic ionic liquid crystalline phase (smectic A) of the cadmium octanoate (CdC₈) and of the cobalt octanoate (CoC₈). By applying the scanning electron microscopy, the cadmium and cobalt octanoate composites containing CdS, Au, Ag and core/shell Au/CdS NPs have been studied. NPs’ sizes and dispersion distribution of the NPs’ size in the nanocomposites have been obtained.