Hamiltonian for the spin quantum Hall effect solution and derivation based on an SU (2) gauge field

A Hamiltonian to describe a spin quantum Hall effect with two types of spin‐orbit coupling is introduced and the eigenfunctions and eigenvalues are obtained for it. It is shown that this Hamiltonian also results by gauging a kinetic energy Hamiltonian by an SU (2) gauge field. The Berry phase is obtained from the model wavefunction for the model and used to define a filling factor. This allows for the calculation of the spin Hall conductivity. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Vibrational spectroscopy differentiates between multipotent and pluripotent stem cells

Over the last few years, there has been an increased interest in the study of stem cells in biomedicine for therapeutic use and as a source for healing diseased or injured organs/tissues. More recently, vibrational spectroscopy has been applied to study stem cell differentiation. In this study, we have used both synchrotron based FTIR and Raman microspectroscopies to assess possible differences between human pluripotent (embryonic) and multipotent (adult mesenchymal) stem cells, and how O(2) concentration in cell culture could affect the spectral signatures of these cells. Our work shows that infrared spectroscopy of embryonic (pluripotent) and adult mesenchymal (multipotent) stem cells have different spectral signatures based on the amount of lipids in their cytoplasm (confirmed with cytological staining). Furthermore, O(2) concentration in cell culture causes changes in both the FTIR and Raman spectra of embryonic stem cells. These results show that embryonic stem cells might be more sensitive to O(2) concentration when compared to mesenchymal stem cells. While vibrational spectroscopy could therefore be of potential use in identifying different populations of stem cells further work is required to better understand these differences.     

Stereoselective synthesis of spirooxindole amides through nitrile hydrozirconation

Spirooxindole amides can be prepared by the intramolecular addition of functionalized indoles into acylimines that are accessed from nitriles by hydrozirconation and acylation. The stereochemical outcome at the quaternary center was controlled by the steric bulk of the substituent at the 2-position of the indole unit. The products are well-suited for diversification to prepare libraries.     

Thermoresponsive copolymer nanofilms for controlling cell adhesion, growth, and detachment

This study reports the development and use of a novel thermoresponsive polymeric nanofilm for controlling cell adhesion and growth at 37 °C, and then cell detachment for cell recovery by subsequent temperature drop to the ambient temperature, without enzymatic cleavage or mechanical scraping. A copolymer, poly(N-isopropylacrylamide-co-hydroxypropyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate) (abbreviated PNIPAAm copolymer), was synthesized by free radical polymerization. The thermoresponses of the copolymer in aqueous solution were demonstrated by dynamic light scattering (DLS) through detecting the sensitive changes of copolymer aggregation against temperature. The DLS measurements revealed the lower critical solution temperature (LCST) at approximately 30 °C. The PNIPAAm film stability and robustness was provided through silyl cross-linking within the film and with the hydroxyl groups on the substrate surface. Film thickness, stability, and reversibility with respect to temperature switches were examined by spectroscopic ellipsometry (SE), atomic force microscopy (AFM), and contact angle measurements. The results confirmed the high extent of thermosensitivity and structural restoration based on the alterations of film thickness and surface wettability. The effective control of adhesion, growth, and detachment of HeLa and HEK293 cells demonstrated the physical controllability and cellular compatibility of the copolymer nanofilms. These PNIPAAm copolymer nanofilms could open up a convenient interfacial mediation for cell film production and cell expansion by nonenzymatic and nonmechanical cell recovery.     

Quantification of oxyresveratrol analog trans-2,4,3',5'-tetramethoxystilbene in rat plasma by a rapid HPLC method: application in a pre-clinical pharmacokinetic study

A rapid HPLC method was developed and validated for the quantification of oxyresveratrol analog trans‐2,4,3′,5′‐tetramethoxystilbene (oxyresveratrol tetramethyl ether, OTE) in rat plasma. Chromatographic separation was achieved on an RP‐HPLC column, which was protected by a guard column through a 12 min gradient delivery of a mixture of acetonitrile–water at 50°C. The UV absorbance at 325 nm was recorded. The retention time of OTE and trans‐stilbene (internal standard) was about 7.7 and 8.4 min, respectively. The calibration curves were linear (R² ≥ 0.9986) with a lower limit of quantification of 15 ng/mL. The intra‐ and inter‐day variations, in terms of RSD, were all lower than 9.8% while the intra‐day and inter‐day bias ranged from ?8.3 to +9.2%. The pharmacokinetics of OTE was assessed in rats using 2‐hydroxypropyl‐β‐cyclodextrin as a dosing vehicle. After intravenous administration, OTE possessed a long terminal elimination half‐life (t_{1/2 λz} = 481 ± 137 min) and slow clearance (Cl = 29.1 ± 3.7 mL/min/kg). Upon oral administration, OTE was rapidly absorbed. However, it only displayed minimal plasma exposure and its absolute oral bioavailability (F) was as low as 4.5 ± 3.2%. Fortunately, the levels of OTE after single oral administration were sufficient to inhibit human cytochrome P450 1B1. Copyright © 2010 John Wiley & Sons, Ltd.     

Bacterial growth response to photoactive quinones

Quinones are known producers of reactive oxygen species (ROS) that may be toxic in natural aquatic environments. In this study, the effects of parent quinones and their photodegradation products on bacterial growth were determined, and photochemical ROS formation rates were measured. Using (3)H-leucine incorporation to measure growth of the bacterium Pseudomonas aeruginosa and natural seawater bacterioplankton, growth inhibition was observed when samples were exposed to dichlone, chloranil and sodium anthraquinone-2-sulfonate (AQ2S). For seawater, compared with other quinones tested, dichlone showed the greatest toxicity in the dark, and AQ2S toxicity was greatest during simultaneous exposure to sunlight. Photodegraded chloranil and dichlone showed decreased toxicity compared with nonirradiated samples. For P. aeruginosa, AQ2S and its photodegradation products showed the greatest toxicity during simultaneous exposure to sunlight. Chloranil photodegradation products showed reduced toxicity compared with the parent compound during simultaneous exposure to sunlight. Dichlone was the only compound to show any toxicity to P. aeruginosa in the dark, and its photodegradation products were more toxic than the parent compound. Based on the results of dark and light controlled experiments measuring bacterial growth and estimated ROS production rates, ROS alone does not account for relative differences in toxicity between these quinones.     

A concise and convergent synthesis of PA-824

An efficient four-step synthesis of PA-824, a promising antituberculosis drug candidate, has been developed. This concise approach offers significant improvements over the synthetic route currently used for large-scale production.     

Nonaqueous catalytic water oxidation

The complex [Ru(Mebimpy)(bpy)(OH(2))](2+) [Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl)pyridine; bpy = 2,2'-bipyridine] and its 4,4'-(PO(3)H(2)CH(2))(2)bpy derivative on oxide electrodes are water oxidation catalysts in propylene carbonate and 2,2,2-trifluoroethanol (TFE) to which water has been added as a limiting reagent. The rate of water oxidation is greatly enhanced relative to that with water as the solvent and occurs by a pathway that is first-order in H(2)O; an additional pathway that is first-order in acetate appears when TFE is used as the solvent.     

Instant conversion of air to a clathrate hydrate: CO(2) hydrates directly from moist air and moist CO(2)(g)

The rapid conversion of vapor mixtures containing the gases CO(2), H(2)S, and HCN to clathrate hydrates was reported recently. The novel method is based on the pulsing of warm vapor mixtures, including a carrier gas, into a cold condensation chamber. With cooling, the vapors, which also include ～1% water and either tetrahydrofuran or trimethylene oxide as a catalyst, nucleate aqueous solution nanodroplets that, on a millisecond time scale, crystallize as hydrate nanoparticles that consume 100% of the water. Humid air approximates the content of mixtures used successfully in the vapor-to-hydrate conversions. FTIR spectra are examined for gas hydrates formed directly from air and air enriched with CO(2), as well as hydrate particles for which CO(2)(g) serves as both guest and aerosol medium. In each instance all of the water in the condensed phase converts to a clathrate hydrate. The subsecond ether-catalyzed formation of the hydrates near 230 K requires only a few percent of the CO(2) pressure used in conventional processes that yield fractional amounts of gas hydrates on an hour time scale in the same temperature range.     

Consistent aromaticity evaluations of methylenecyclopropene analogues

Quantitative evaluations of the aromaticity (antiaromaticity) of neutral exocyclic substituted cyclopropenes (HC)(2)C=X (X = BH to InH (group 13), CH(2) to SnH(2) (group 14), NH to SbH (group 15), O to Te (group 16)) by their computed extra cyclic resonance energies (ECRE, via the block-localized wave function method) and by their aromatic stabilization energies (ASEs, via energy decomposition analyses) correlate satisfactorily (R(2) = 0.974). Electronegative X-based substituents increase the aromaticity of the cyclopropene rings, whereas electropositive substituents have the opposite effect. For example, (HC)(2)C=O is the most aromatic (ECRE = 10.3 kcal/mol), and (HC)(2)C=InH is the most antiaromatic (ECRE = -15.0 kcal/mol). The most refined dissected nucleus-independent chemical shift magnetic aromaticity index, NICS(0)(πzz), also agrees with both energetic indexes (R(2) = 0.968, for ECRE; R(2) = 0.974, for ASE), as do anisotropy of the induced current density plots.