Etude des propriétés cristallographiques,diélectriques et d'optique non linéaire de quelques nouvelles phases de composition BaxLi5−2xNb5(1−y)Ta5yO15 et de structure bronzes oxygénés de tungstène quadratiques

Two series of phases with tetragonal bronze-like structure and composition Ba_xLi_5?2xT₅O₁₅ (T = Nb, Ta) have been isolated in the systems BaNb₂O₆LiNbO₃ and BaTa₂O₆LiTaO₃. All these phases show ferroelectric-paraelectric transitions. The Curie temperature increases with the lithium content. The value of T_C for Ba_2.03Li_0.94Nb₅O₁₅ is the highest ever observed for this type of structure: the obtained phases are potentially good materials for the harmonic generation of the 0.53-μm radiation. The optical yield of the niobate Ba_2.14Li_0.71Nb₅O₁₅ is about 2.5 times that of Ba₂NaNb₅O₁₅ and 250 times that of the K.D.P. The crystallographic and dielectric data of the system Ba_2.14Li_0.71Nb₅O₁₅Ba_2.14Li_0.71Ta₅O₁₅ characterize three domains, which are respectively antiferroelectric, ferroelectric, and paraelectric. The Curie temperature and the optical yield decrease with increasing tantalum content.     

Indole esters as heterocyclic synthons. III. Preparation and reactions of furo[3,2-b]indoles

The preparation of furo[3,2-b]indoles via Dieckmann cyclization is described. The precursor diesters were obtained from 3-hydroxy-1H-indole-2-carboxylic acid esters and methyl or ethyl bromoacetate. Reactions of the furo[3,2-b]indole enolic esters prepared are discussed.     

Facile synthesis of 2-bromo-3-fluorobenzonitrile: an application and study of the halodeboronation of aryl boronic acids

A scaleable synthesis of 2-bromo-3-fluorobenzonitrile via the NaOMe-catalyzed bromodeboronation of 2-cyano-6-fluorophenylboronic acid was developed. The generality of this transformation was demonstrated through the halodeboronation of a series of aryl boronic acids. Both aryl bromides and aryl chlorides were formed in good to excellent yields when the corresponding aryl boronic acid was treated with 1,3-dihalo-5,5-dimethylhydantoin and 5 mol % NaOMe.     

Stericaliy Congested Molecules: 2,2′-[(Biaryldiyl)bis(oxy)]bis[1,3,2-oxazaphospholidines]

The original suggestion that a through-space mechanism was operative in the seven-bond J(P, P) coupling constant of 30.3 Hz observed for 3.3′-bis(1,1-dimethylethyl)-2,2′-[3,3′,5,5′-tetrakis(1,1-dimethylethyl)-1,1′-biphenyl-2,2′-diyl]bis(oxy)}bis[1,3,2-oxazaphospholidine] ( 1a )) was investigated. In the solid-state CP-MAS ³¹PNMR spectrum of 1a , two nonequivalent P -atoms were observed; sufficient resolution could not be obtained to determine whether P, P coupling was present. The preparation and spectral data of the N-methyl analogue 1b and of the acyclic N-isopropyl analogue 6 (Scheme 1) provided evidence that a) the essentially exclusive formation (R*, R*,S*)- 1a in the reaction of the disodium biphenyldiolate 3a with the phosphorochloridite 4a is the result of significant differences in the free energy of activation (ΔG*) for the formation of the various diastereoisomers due to the steric congestion within the molecule and that b) the magnitude of the observed P,P coupling is dependent upon the degree of conformational freedom within the molecule. In the ³¹P-NMR spectrum of the P-sulfide 7 , which was prepared by the reaction of la with sulfur, 2s resonances were observed that strongly suggested that the lone electrons pair on P are involved in the mechanism for the transmission of coupling data. The (4S,5R) -12 and (4R, 5S) -12 of la were prepared in a three-step reaction sequence starting from the corresponding enantiomerically pure norephredine 8 (Scheme 2). Both (4S, 5R)- and (4R, 5S) -12 were obtained as a diastereoisomer mixture that differ by the configuration of the axis of chirality, i.e., (R*R*,R*)- and (R*,S*,R*) -12 were obtained. The major diastereoisomer was obtained upon recrystallization, and the atropisomers were observed to equilibrate in solution by monitoring the H? C(5) resonance in the ¹H-NMR with time (ΔG° = 0.4 kcal/mol; Fig. 2). The process observed corresponds to the restricted rotation about the central single bond of the biphenyl system. The isolation of an atropisomer with only a single ortho substituent on each aryl ring is quite rare. In the ¹³C-NMR spectrum of both (R*,R*,R*)- and (R*,S*,R*) -12 , C(5) is two-bond-coupled to the oxazaphospholidine P-atom (²J(C(5),P((2)) = 8.5 Hz) that is further virtually coupled to the P-atom of the other oxazaphospholidine ring (7J(P(2),P(2′)) = 30 Hz; ⁹J(C(5),P(2′)) = 0 Hz; δ(P(2)) = δ(P(2′)) = 136 ppm. In the ³¹P-NMR spectrum of (R*,R*,S*) -12 , which was prepared from the racemic chloridite (mixture of three diastereoisomers was obtained), a ⁷J(P(2),P(2′) of 36 Hz was observed. These observations provide strong evidence that seven-bond P,P coupling occurs in all three diastereoisomers of 12 . The observed P,P coupling is both independent of the configuration of the chiral axis and the configuration of the asymmetric P-centers. This independence of P,P coupling upon the configuration on P implies also the independence of the observed coupling upon the orientation of the lone-pair of electrons on P provided that the conformations of the diastereoisomers are similar in solution. The X-ray crystal structure of the complex formed from 1a and dichloro(cycloocta-1,5-diene)platinum(II) was obtained and the solid-state structure discussed. The major diastereoisomer of (4S,5R) -12 was used as a chiral ligand in asymmetric hydrosilylation and hydrogenation reactions (Scheme 3).     

Hydrous ferric oxide: evaluation of Cd-HFO surface complexation models combining Cd(K) EXAFS data,potentiometric titration results,and surface site structures identified from mineralogical knowledge

The surface properties of ferrihydrite were studied by combining wet chemical data, Cd(K) EXAFS data, and a surface structure and protonation model of the ferrihydrite surface. Acid-base titration experiments and Cd(II)-ferrihydrite sorption experiments were performed within 3<-log[H(+)]<10.5 and 0.5<[Cd(t)]<12 mM in 0.3 M NaClO(4) at 25 degrees C, where [Cd(t)] refers to total Cd concentration. Measurements at -5.5triple bond Fe-OH(-1/2),logk((int))=-8.29, assuming the existence of a unique intrinsic microscopic constant, logk((int)), and consequently the existence of a single significant type of acid-base reactive functional groups. The surface structure model indicates that these groups are terminal water groups. The Cd(II) data were modeled assuming the existence of a single reactive site. The model fits the data set at low Cd(II) concentration and up to 50% surface coverage. At high coverage more Cd(II) ions than predicted are adsorbed, which is indicative of the existence of a second type of site of lower affinity. This agrees with the surface structure and protonation model developed, which indicates comparable concentrations of high- and low-affinity sites. The model further shows that for each class of low- and high-affinity sites there exists a variety of corresponding Cd surface complex structure, depending on the model crystal faces on which the complexes develop. Generally, high-affinity surface structures have surface coordinations of 3 and 4, as compared to 1 and 2 for low-affinity surface structures.     

Template-directed self-assembly of 10-microm-sized hexagonal plates

This article presents a strategy for the fabrication of ordered microstructures using concepts of design inspired by molecular self-assembly and template-directed synthesis. The self-assembling components are 4-microm-thick hexagonal metal plates having sides 10 microm in length ("hexagons"), and each template consists of a 4-microm-thick circular metal plate surrounding a central cavity, the perimeter of which is complementary in shape to the external edges of a two-dimensional, close-packed array of hexagons. The hexagons and templates (collectively, "pieces") were fabricated via standard procedures and patterned into hydrophobic and hydrophilic regions using self-assembled monolayers (SAMs). Templated self-assembly occurs in water through capillary interactions between thin films of a nonpolar liquid adhesive coating the hydrophobic faces of the pieces. The hexagons tile the cavities enclosed by the templates, and the boundaries of the cavities determine the sizes and shapes of the assemblies. Curing the adhesive with ultraviolet light furnishes mechanically stable arrays having well-defined morphologies. By allowing control over the structures of the resulting aggregates, this work represents a step toward the development of practical methods for microfabrication based on self-assembly.     

Theoretical Study of the Distortion from Regular Tetrahedral Structure of M(NH2)4 Complexes

Theoretical study on tetrakis-amido complexes (M(NR₂)₄, M = Ti, V, Cr, and Mo; R = H, Me) is presented. At first a rough investigation of the potential energy surface indicates that all stationary points are of S ₄ or D ₂ symmetry depending on the coupled rotations of the NR₂ groups. Qualitative correlation diagrams are calculated within S ₄ or D ₂ symmetry constraint between two limiting structures of D ₂ d symmetry. DFT (B3LYP) calculations on these two paths are presented for unsubstituted complexes (R = H) and the various minima are optimized and characterized. These results are discussed in the light of the correlation diagrams. Finally, optimization of the different minima has been performed on substituted species (R = Me) and the theoretical results are shown to be in good agreement with the experimental structural determination when available.     

Notiz über einen Zugang zu β, γ-ungesättigten Carbonsäurederivaten mit Hilfe der Amidacetal-Claisenumlagerung. Über synthetische methoden, 17. Mitteilung

Note on a preparation of β, γ-unsaturated carboxylic acid derivatives using the amide acetal Claisen rearrangement 3-(Trimethylsilyl)allyl alcohols smoothly undergo the amide acetal Claisen rearrangement furnishing allyl silanes. Subsequent protolysis with HF at ?20° provides a convenient, stereoselective method for the preparation of β, γ-unsaturated carboxylic acid derivatives. Three model examples illustrate the procedure.     

Synthesis of lipid A derivatives and their interactions with polymyxin B and polymyxin B nonapeptide

Lipid A is the causative agent of Gram-negative sepsis, a leading cause of mortality among hospitalized patients. Compounds that bind lipid A can limit its detrimental effects. Polymyxin B, a cationic peptide antibiotic, is one of the simplest molecules capable of selectively binding lipid A and may serve as a model for further development of lipid A binding agents. However, association of polymyxin B with lipid A is not fully understood, primarily due to the low solubility of lipid A in water and inhomogeneity of lipid A preparations. To better understand lipid A-polymyxin B interaction, pure lipid A derivatives were prepared with incrementally varied lipid chain lengths. These compounds proved to be more soluble in water than lipid A, with higher aggregation concentrations. Isothermal titration calorimetric studies of these lipid A derivatives with polymyxin B and polymyxin B nonapeptide indicate that binding stoichiometries (peptide to lipid A derivative) are less than 1 and that affinities of these binding partners correlate with the aggregation states of the lipid A derivatives. These studies also suggest that cooperative ionic interactions dominate association of polymyxin B and polymyxin B nonapeptide with lipid A.