Effects of trivalent phosphorus compounds on vinyl polymerization. III. Anionic polymerization of acrylonitrile with triethyl phosphite

The polymerization of acrylonitrile catalyzed by triethyl phosphite was studied. It was found that the order with respect to the monomer concentration varies from two to three, depending on the polymerization temperature. From the results obtained for the molecular weight of the polymer and the phosphorus content in the polymer, it was thought that the zwitterion formed by the addition of triethyl phosphite to acrylonitrile is responsible for the initiation of polymerization. The following equation was suggested for the rate of the polymerization:      

Discontinuous buffer systems operative at pH 2.5 - 11.0, 0 degrees C and 25 degrees C, available on the Internet

This communication is an announcement of the availability on the Internet of a computer output of discontinuous buffer systems operative at pH 2.5-11.0, 0 degrees C and 25 degrees C, generated by the theory and program of T. M. Jovin. The output and instructions for its use can be accessed under http://www.buffers.nichd.nih.gov.     

Three solutions of constant sign for a system of discrete equations

We consider the following system of discrete equations

The influence of water content, cooling and warming rate upon survival of embryonic axes of Poncirus trifoliata (L.)

The present study investigated the relative contributions of water content and non-equilibrium cooling and warming rates to the survival of cryopreserved axes of recalcitrant P. trifoliata seeds. Reducing water contents from 1.7 and 0.26 g water per g dry mass is believed to increase cytoplasmic viscosity. Cooling to -196 degree C was done at rates averaging between 0.17 and 1300 degree C per second, and warming at 600 or 1.35 degree C per second. Survival was assessed after 4 weeks in vitro. Rapid warming resulted in higher survival and normal development of axes at all water contents. The effects of cooling rate were dependent on the water content of axes. Cooling rates resulting in >70 percent normal development ranged between 0.17 and about 1300 degree C per second for axes at a water content of 0.26 g water per g dry mass narrowing with increasing hydration to an apparent optimum at about 686 degree C per second in axes at 0.8 g water per g dry mass At 1.7 g water per g dry mass, axes cooled at 0.17 degree C per second yielded nearly 40 percent normal development, whereas faster cooling was deleterious. Results are interpreted in the context of the effect of water content on cytoplasmic viscosity and the rate of intracellular ice formation. At low water contents, the high intracellular viscosity slows ice crystallization making survival independent of cooling rate. At higher water contents, the reduced viscosity requires faster cooling to prevent ice crystal damage. The ability to cool rapidly with increasing hydration is balanced with an increasing limitation to dissipate heat fast enough to prevent severe damage.     

Optimization of carbohydrate silylation for gas chromatography

We developed and optimized a new carbohydrate mono- and disaccharides silylation reaction, replacing pyridine and requiring lower reaction temperature and less time. Our method consists of three basic steps. The first one is oxime formation, the second one silylate derivative and the last one gas chromatography separation and quantification with an internal standard. We evaluated several solvents, including acetonitrile, hydroxylamine and aniline. We found aniline to be the best reaction media for oxime formation with hydroxylamine hydrochloride. Among silylation agents we found N,O-bis(trimethyl)trifluoroacetamide (BSTFA) was the most efficient. Together these reagents favored both a short analysis time and fewer by-products. We evaluated the method with model solutions containing: arabinose and co-eluting xylose, fructose, glucose, sucrose and salicin (internal standard) and found it suitable for processed food analysis.     

Cochlear compression estimates from measurements of distortion-product otoacoustic emissions

Evidence of the compressive growth of basilar-membrane displacement can be seen in distortion-product otoacoustic emission (DPOAE) levels measured as a function of stimulus level. When the levels of the two stimulus tones (f1 and f2) are related by the formula L1 = 39 dB + 0.4 x L2 [Kummer et al., J. Acoust. Soc. Am. 103, 3431-3444 (1998)] the shape of the function relating DPOAE level to L2 is similar (up to an L2 of 70 dB SPL) to the classic Fletcher and Munson [J. Acoust. Soc. Am. 9, 1-10 (1933)] loudness function when plotted on a logarithmic scale. Explicit estimates of compression have been derived based on recent DPOAE measurements from the laboratory. If DPOAE growth rate is defined as the slope of the DPOAE I/O function (in dB/dB), then a cogent definition of compression is the reciprocal of the growth rate. In humans with normal hearing, compression varies from about 1 at threshold to about 4 at 70 dB SPL. With hearing loss, compression is still about 1 at threshold, but grows more slowly above threshold. Median DPOAE I/O data from ears with normal hearing, mild loss, and moderate loss are each well fit by log functions. When the I/O function is logarithmic, then the corresponding compression is a linear function of stimulus level. Evidence of cochlear compression also exists in DPOAE suppression tuning curves, which indicate the level of a third stimulus tone (f3) that reduces DPOAE level by 3 dB. All three stimulus tones generate compressive growth within the cochlea; however, only the relative compression (RC) of the primary and suppressor responses is observable in DPOAE suppression data. An RC value of 1 indicates that the cochlear responses to the primary and suppressor components grow at the same rate. In normal ears, RC rises to 4, when f3 is an octave below f2. The similarities between DPOAE and loudness compression estimates suggest the possibility of predicting loudness growth from DPOAEs; however, intersubject variability makes such predictions difficult at this time.     

An investigation of the chemical stability of arsenosugars in basic environments using IC-ICP-MS and IC-ESI-MS/MS

This paper evaluates the chemical stability of four arsenosugars using tetramethylammonium hydroxide (TMAOH) as an extraction solvent. This solvent was chosen because of the near quantitative removal of these arsenicals from difficult to extract seafood (oysters and shellfish). Four arsenosugars (3-[5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropylene glycol--As(328), 3-5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropanesulfonic acid--As(392), 3-[5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropyl hydrogen sulfate--As(408), and 3-[5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropyl-2,3-hydroxypropyl phosphate--As(482)) were evaluated. The stability of these four arsenosugars were studied independently in a solution of 2.5% TMAOH at 60 degrees C over a period of up to 8 h. Two arsenosugars, As(328) and As(392), were found to be relatively stable in this solution for up to 8 h. However, As(408) and As(482) formed detectable quantities of dimethylarsinic acid (DMAA) and As(328) within 0.5 and 2 h, respectively. It was found that 97% of As(408) degrades after 8 h of treatment producing 3.4 times as much DMAA as As(328). This is contrary to As(482), which produces 13 times as much As(328) as DMAA and only 37% of the As(482) was converted by the 8 h treatment at 60 degrees C. These degradation products led to the investigation of weaker TMAOH extraction solvents. Three different concentrations (2.5%, 0.83% and 0.25%) were used to determine the effect of TMAOH concentration on the degradation rate of As(408). By reducing the TMAOH concentration to 0.83%, the conversion of the arsenosugar to As(328) and DMAA is nearly eliminated (less than 5% loss). Arsenosugars, As(408) and As(482), were also studied in 253 mM NaOH to verify the degradation products. The NaOH experiments were conducted to investigate a possible hydroxide based reaction mechanism. Similar degradation plots were found for each arsenosugar when compared to the 2.5% TMAOH data. A mechanism has been proposed for the formation of As(328) from As(408) and As(482) in base via an SN2 reaction (hydroxide attack) at the side chain carbon adjacent to the inorganic ester. The formation of DMAA is observed in all arsenosugars after prolonged exposure. This probably occurs via an SN2 attack at the arsenic atom.     

On periodic solutions of nonlinear integral equations modelling infectious disease on measure chain

The modelling of the spread of infectious disease is carried out for time t on a measure chain T. Our approach unifies the continuous case and the discrete case . The model is described by the integral equation

where x(t) represents the proportion of the population infected at time t, f(t,x(t)) denotes the proportion of the population newly infected per unit time, and τ is the length of time an individual remains infectious. Using the measure chain calculus, we shall develop criteria for the existence of a nontrivial and nonnegative periodic solution for the modelling equation. The criteria can be implemented numerically, for this we shall give an algorithm as well as illustrative examples.     

Thermal and photochemical reactivity of oxygen atoms on gold nanocluster surfaces

Reduction of oxidized gold nanoclusters by exposures to foreign gases and irradiation of UV photons has been investigated using X-ray photoelectron spectroscopy. Gold nanoclusters with narrow size distributions protected by alkanethiolate ligands were deposited on a TiO₂(1 1 0) surface with dip coating. Oxygen plasma etching was used for removal of alkanethiolate ligands and oxidization of gold clusters. The oxidized gold clusters were exposed to CO, C₂H₂, C₂H₄, H₂, and hydrogen atoms. Although, C₂H₄ and H₂ did not show any indications of reduction of oxidized gold clusters, CO, C₂H₂, and hydrogen atoms reduced the oxides on gold cluster surfaces. Among them, hydrogen atoms were most effective for reduction. Irradiation of UV photons around 400 nm could also reduce the oxidized gold clusters. The photochemical reduction mechanism was proposed as follows. The photo-reduction was initiated by electronic excitation of gold clusters and oxygen atoms activated reacted with carbon atoms at the surfaces of gold clusters. Carbon species were likely absorbed in gold clusters or remained at the boundaries between gold clusters when gold clusters agglomerated during oxygen plasma exposures. As the photochemical reduction progressed, carbon atoms segregated to the surfaces of gold clusters.