Simulation of aerated lagoon using artificial neural networks and multivariate regression techniques

The aim of this study was to develop an empirical model that provides accurate predictions of the biochemical oxygen demand of the output stream from the aerated lagoon at International Paper of Brazil, one of the major pulp and paper plants in Brazil. Predictive models were calculated from functional link neural networks (FLNNs), multiple linear regression, principal components regression, and partial least-squares regression (PLSR). Improvement in FLNN modeling capability was observed when the data were preprocessed using the PLSR technique. PLSR also proved to be a powerful linear regression technique for this problem, which presents operational data limitations.     

INSTRUMENTATION FOR FLUORESCENCE MICROSCOPY WITH PICOSECOND TIME RESOLUTION

Abstract— Time-resolved fluorescence microscopy using excitation by actively mode-locked dye lasers and analysis by time-correlated single photon counting is shown to be an effective way of obtaining a high degree of spatial and temporal resolution. The imaging capabilities of the microscope make for optimal instrument response functions even with inexpensive photomultiplier tubes. Thus far limited (by the laser source) to long wavelength visible excitation, the excellent light collection and imaging, coupled with the sensitivity of single photon counting make it highly probable that the much weaker U-V second harmonics of the visible dyes will be useable. Certainly the potential of using the third harmonic line (355 nm) of a mode-locked c.w. Nd: YAG laser, or fundamental lines from mode-locked c.w. ion lasers as excitation sources will enhance the technique. Nevertheless, with visible-absorbing dyes only it is possible to excite such fluorochromes as chlorophylls, porphyrins, xanthenes (rose bengal, erythrosin B), phycobiliproteins, thionine dyes, ethidium bromide, and so on. Furthermore, this technique can be straightforwardly extended for polarized light measurements thereby allowing determinations of rotational diffusion of fluorochromes in cells and organelles. The extension to variable temperature situations is easy to conceive. In addition to its use for examination of cellular and sub-cellular entities, the equipment described can be profitably employed wherever spatial resolution may provide extra information, such as studies of powders and the structures of surfaces and interfaces.     

The reaction of 2-picoline N-Oxide with o-substituled benzoates and lsatoic anhydrides

The reaction of 2-picoline N-Oxide anion with o-substituted henzoates and isatoic anhydrides to give synthetically useful l-(2-methoxyphenyl)-2-(2-pyridinyl)ethanone N-oxides, I-(2-hydroxy-phenyJ)-2-(2-pyridinyl)ethanone N-oxides and I -(2-arninopheny])-2-(2-pyridinyl)ethanone N-oxides is described.     

Complex emulsion inversion pattern associated with the partitioning of nonionic surfactant mixtures in the presence of alcohol cosurfactant

Commercial ethoxylated nonionic surfactant mixtures containing alcohol cosurfactant exhibit a three-phase behavior whose formulation strongly varies with the water/oil ratio. As a consequence, a change in water/oil ratio can result in a sequence of up to three different emulsion inversion processes, through a combination of formulation and composition effects.     

Synthesis of Phosphaformamidines and Phosphaformamidinates

A large‐scale synthetic route to a variety of phosphaformamidines and phosphaformamidinates, a type of derivative that was not accessible by the methods previously known for preparing phosphaamidines and phosphaamidinates, is reported. Thermally stable ethyl N‐arylformimidates 1 (ArN?CH(OEt), Ar=2,4,6‐(Me)₃Ph or 2,6‐(iPr)₂Ph) readily reacted with lithium dialkyl‐ and diarylphosphanides to afford the corresponding N‐aryl phosphaformamidines in 80 and 60 % yield, respectively, whereas with lithium (aryl)(silyl)phosphanide, the N‐aryl‐N‐silylphosphaformamidine (60 % yield) was obtained. Addition of primary lithium arylphosphanides to 1 followed by addition of a stoichiometric amount of nBuLi gave rise to the respective phosphaformamidinates (70–88 % yield). Methanolysis of the products afforded the N‐aryl‐N‐hydrogenophosphaformamidines (90–95 % yield). The solid‐state structure of one of the phosphaformamidinates is also presented.     

The synthesis and thermal curing parameters of a novel quinoxaline monomer with terminal ethynyl thermoset and phenylethynyl intramolecular cycloaddition postcure capability

The Synthesis of 3,3′-bis(4-[3-ethynylphenoxy]phenyl)-7,7′-bis(phenylethynyl)-2,2′-diphenyl-6,6′-biquinoxaline (I) was accomplished by the reaction of 2,2′-bis(phenylethynyl)-5,5′-diaminobenzidine (II) and 4-(3-ethynylphenoxy)benzil. Thermal analysis of I indicated a softening temperature of 107°C, followed by an exotherm above 150°C that corresponded to a independent crosslinking reaction of the terminal acetylene groups and an intramolecular cycloaddition (IMC) reaction of the 2,2′-bis(phenylethynyl)biphenyl moieties. In the synthetic work substantial improvements were made in the synthesis of II. The sample of I was cured at 200°C and the maximum partially cured transition temperature attained was 280°C. A sample of 3,3′-bis(4,[3-ethynylphenoxy]phenyl)-2,2′-diphenyl-6,6′-biquinoxaline (IV) was similarly tested as a model without IMC capability and its corresponding value was 250°C. The difference between these two values is discussed briefly.     

Photosensitization of DNA damage by a new cationic pyropheophorbide derivative: sequence-specific formation of a frank scission

Pyropheophorbides are red-absorbing porphyrin-like photosensitizers that may interact with DNA either by intercalation or by external binding with self-stacking according to the value of the nucleotide to chromophore molar ratio (N/C). This article reports on the nature and sequence selectivity of the DNA damage photoinduced by a water-soluble chlorhydrate of aminopyropheophorbide. First, this pyropheophorbide is shown to induce on irradiation the cleavage of phiX174 DNA by both Type-I and -II mechanisms, suggested by scavengers and D2O effects. These conclusions are then improved by sequencing experiments performed on a 20-mer oligodeoxynucleotide (ODN) irradiated at wavelengths >345 nm in the presence of the dye, N/C varying from 2.5 to 0.5. Oxidation of all guanine residues to the same extent is observed after piperidine treatment on both single- and double-stranded ODN. Moreover, unexpectedly, a remarkable sequence-selective cleavage occurring at a 5'-CG-3' site is detected before alkali treatment. This frank break is clearly predominant for a low nucleotide to chromophore molar ratio, corresponding to a self-stacking of the dye along the DNA helix. The electrophoretic properties of the band suggest that this lesion results from a sugar oxidation, which leads via a base release to a ribonolactone residue. The proposal is supported by high-performance liquid chromatography-matrix-assisted laser desorption-ionization mass spectrometry experiments that also reveal other sequence-selective frank scissions of lower intensity at 5'-GC-3' or other 5'-CG-3' sites. This sequence selectivity is discussed with regard to the binding selectivity of cationic porphyrins.     

Structure and oxidation at quasicrystal surfaces

We have investigated the atomic and electronic structure, chemical composition, and oxidation characteristics of the surfaces of icosahedral, Al-rich quasicrystals, using a variety of surface-sensitive techniques (LEED, XPS, STM, AES). We have systematically investigated the way that these traits vary with preparation conditions (e.g. sputtering and then annealing to various temperatures, vs. fracture), with surface symmetry (e.g. 2f vs. 3f vs. 5f surfaces), and with bulk composition (e.g. i-Al–Pd–Mn vs. i-Al–Cu–Fe). We have also compared our results for the quasicrystals with results for crystalline approximants and other related crystalline phases. Our main conclusions are that, under specific conditions of sputter-annealing, the bulk atomic and electronic structures of the clean quasicrystal propagate to the surface. Also, the oxidation chemistry is dominated by that of the primary constituent, aluminum.     

ALKALINE QUENCHING OF BACTERIORHODOPSIN TRYPTOPHANYL FLUORESCENCE: EVIDENCE FOR AQUEOUS ACCESSIBILITY OR A HYDROGEN-BONDED CHAIN

Abstract— Comparison between Trp fluorescence yields of membrane-bound bacteriorhodopsin (BR) and retinylidene-free bacterioopsin (BO) is consistent with a model in which all eight Trp residues are active fiuorophores in the latter, while the emission of all but two residues in the former is lost by energy transfer to retinal. The visible chromophore of BR is progressively bleached with increasing pH. Up to pH 12 this bleaching is reversed on reneutralization; but above this the change is irreversible with the appearance of a new absorption band characteristic of free retinal. Emission yields for both proteins decrease with increasingly alkaline pH in a manner typical of energy transfer to weakly-fluorescent tyrosinate. The limiting yields, reached at a pH corresponding to that producing irreversible bleaching of the visible chromophore, agree with an integral value of one remaining active Trp fluorophore in BR and between one and two in BO and show that the bulk of Trp are within the 11 Å Förster energy-transfer distance of Tyr accessible to OH⁻. Current models of the native protein structure of BR arrange the polypeptide chain primarily in a bundle of seven helical segments with axes perpendicular to the lipid bilayer plane and with buried polar residues, including Trp and Tyr, located at intrahelical surfaces. An interpretation of the observed accessibility of buried Tyr to OH⁻ is that an aqueous region exists within the protein structure. Moreover, this putative aqueous region must be close to the retinylidene chromophore and thus may be associated with the light-driven ion transport system. The results are also compatible with energy transfer to internal Tyr residues which are connected via a chain of phenolate hydrogen bonds to a surface Tyr.     

Direct and simultaneous spectrofluorometric determination of naproxen and salicylate in human serum assisted by chemometric analysis

A direct method for the simultaneous determination of naproxen and salicylate in human serum is reported, based on a combination of spectrofluorometric measurements with two multivariate calibration techniques: partial least-squares (PLS-1) and the novel net analyte preprocessing (NAP). The method is rapid, selective and sensitive, and is based on the measurement of the fluorescence spectra of NH₃ alkalinized whole human sera at the excitation wavelength of 315 nm. It can be applied within the ranges of concentrations 50-200 ng ml⁻¹ for naproxen and 100-300 ng ml⁻¹ for salicylate. The employed chemometric techniques have been compared on the basis of the statistical indicators for calibration and validation. Reproducibility and interference studies in abnormal sera have also been carried out.