Transition metal ions-doped polyaniline/graphene oxide nanostructure as high performance electrode for supercapacitor applications

Journal of Solid State Electrochemistry - Polyaniline/graphene oxide (PANI/GO) co-doped with Zn2+ and Fe3+ was synthesized via a simple and low cost one-step chronoamperometry method on stainless...     

Synthesis of trans-3,4-Dimethyl-4-(3-hydroxyphenyl)piperidine Opioid Antagonists: Application of the Cis-Thermal Elimination of Carbonates to Alkaloid Synthesis

Improved syntheses of twotrans-3,4-dimethyl-4-(3-hydroxyphenyl)piperidine opioid antagonists from 1,3-dimethyl-4-piperidinone are described. The 1,3-dimethyl-4-arylpiperidinol 23 was selectively dehydrated in a two step process to the 1,3-dimethyl-4-aryl-1,2,3,6-tetrahydropyridine 26 by the cis-thermal elimination of the corresponding alkyl carbonate derivative at 190 degrees C. In the presence of a basic nitrogen, the success of the elimination was found to be critically dependent upon the nature of the carbonate alkyl group, with Et, i-Bu, and i-Pr being preferred (90% yield). Alkylation of the metalloenamine, formed by deprotonation of 26 with n-BuLi, proceeded regio- and stereospecifically to give the trans-3,4-dimethyl-4-aryl-1,2,3,4-tetrahydropyridine 27, which was converted in three steps to the common intermediate, (3R,4R)-3,4-dimethyl-4-(3-hydroxyphenyl)piperidine. LY255582, a centrally-active opioid antagonist, and LY246736-dihydrate, a peripherally-active opioid antagonist, were prepared from 1,3-dimethyl-4-piperidinone in 11.8% yield (8 steps) and 6.2% yield (12 steps), respectively.     

Bromodimethylsulfonium bromide mediated Michael addition of amines to electron deficient alkenes

Bromodimethylsulfonium bromide has been found to be an efficient catalyst for the Michael addition of a wide variety of amines to electron deficient alkenes at room temperature. The protocol is very simple and chemoselective. Aliphatic and benzylic amines undergo conjugate addition within a very short period under solvent-free conditions and provide excellent yields of products.     

An earth-abundant bimetallic catalyst coated metallic nanowire grown electrode with platinum-like pH-universal hydrogen evolution activity at high current density

A self-supported and flexible current collector solely made of earth-abundant elements, NiCo layered double hydroxide (LDH) wrapped around Cu nanowires (Cu-Ws) grown on top of commercially available Cu mesh (Cu-m), outperforms the benchmark 40 wt% Pt/C in catalyzing the electrochemical hydrogen evolution reaction (HER). The Cu-m/Cu-W/NiCo-LDH cathode operates both in acidic and alkaline media exhibiting high turnover frequencies (TOF) at 30 mV (0.3 H₂ s⁻¹ in 1 M KOH and 0.32 H₂ s⁻¹ in 0.5 M H₂SO₄, respectively) and minimal overpotentials of 15 ± 6 mV in 1 M KOH and 27 ± 2 mV in 0.5 M H₂SO₄ at −10 mA cm⁻². Cu-m/Cu-W/NiCo-LDH outperforms the activity of 40 wt% Pt/C that needs overpotentials of 22 and 18 mV in 1 M KOH and 0.5 M H₂SO₄, respectively. With a tremendous advantage over Pt/C in triggering proton reduction with fast kinetics, similar mass activity and pH-universality, the current collector demonstrates outstanding operational durability even at above −1 A cm⁻². The high density of electronic states near the Fermi energy level of Cu-Ws is found to be a pivotal factor for efficient electron transfer to the NiCo-LDH catalyst. This class of self-supported electrodes is expected to trigger rapid progress in developing high performance energy conversion and storage devices.

A flexible self-supported electrode made of earth-abundant elements, NiCo layered double hydroxide wrapped around Cu nanowires grown on Cu mesh, outperforms the benchmark 40 wt% Pt/C in catalyzing electrochemical hydrogen evolution reaction.     

Carbon Paste Electrode Modified with Functionalized Nanoporous Silica Gel as a New Sensor for Determination of Silver Ion

A new dipyridyl‐functionalized silica gel (DPSG) was synthesized. The potentiometric response of silver ion was investigated at a carbon paste electrode chemically modified with functionalized nanoporous silica gel. The electrodes with a DPSG proportions of 10.1% (w/w), showed very stable potential. Calibration plots with Nernstian slopes for Ag⁺ were observed, 58.7 (±0.9) mV decade^?1, over a wide linear range of concentration (5.0×10^?7 to 1.0×10^?1 M). The electrode has a detection limit of 1.0×10^?7 M. The selectivity coefficients measured by the match potential method in acetate buffer, pH 5.5, were investigated. The electrode has fast response time, high performance, high sensitivity in wide cation activity ranges, and good long term stability (more than 6 months). The method was satisfactory and used to determine the concentration of silver ion in waste waters contaminated by this metal.     

Highly Selective and Sensitive Triiodide PVC‐Membrane Electrode Based on a New Charge‐Transfer Complex of Bis(2,4‐Dimethoxybenzaldehyde)butane‐2,3‐Dihydrazone with Iodine

In this work, a highly selective membrane triiodide sensor based on a new charge‐transfer complex of bis(2,4‐dimethoxybenzaldehyde)butane‐2,3‐dihydrazone with iodine (Iodide Charge Transfer complex: ICT) as membrane carrier is introduced. The influences of five different solvent mediators on sensitivity and selectivity of the proposed sensor were considered. The best performance was obtained with the membrane composition containing 30% poly (vinyl chloride), 63% DBP, 5% ICT and 2% HTAB. The electrode shows a Nernstian behavior over a very wide triiodide ion concentration range (1.0 × 10^?7‐1.0 × 10^?2 M), and a detection limit value of 8.0 × 10^?8 M. The effect of pH on the potentiometric response of the sensor was also studied, and it was found that the response of the electrode is independent of the pH of the solution in the pH range of 4.0–10. The proposed sensor has a very fast response time (< 12 s), and good selectivities relative to a wide variety of common inorganic and organic anions, including iodide, acetate, bromide, chloride, fluoride, nitrite, nitrate, sulfite, sulfate, cyanide and thiocyanate. In fact the selectivity behavior of the proposed triiodide ion‐selective electrode shows great improvements compared to the previously reported electrodes for triiodide ion. The proposed membrane sensor can be used for at least 6 months without any divergence in the potentials. The electrode was successfully applied as an indicator electrode in the titration of triiodide with thiosulfate ion.     

Determination of carbamazepine in formulation samples using dispersive liquid–liquid microextraction method followed by ion mobility spectrometry

A simple, sensitive, fast and efficient method based on dispersive liquid–liquid microextraction (DLLME) followed by ion mobility spectrometry (IMS) has been proposed for preconcentration and trace detection of carbamazepine (CBZ) in formulation samples. In this method, 1 mL of methanol (disperser solvent) containing 80 μL of chloroform (extraction solvent) was rapidly injected by a syringe into a sample. After 5 min centrifugation, the preconcentrated carbamazepine in the organic phase was determined by IMS. Development of DLLME procedure includes optimization of parameters influencing the extraction efficiencies such as kind and volume of extraction solvent, disperser solvent and salt addition, centrifugation time and pH of the sample solution. The proposed method presented good linearity in the range of 0.05–10 μg mL^?1 and the detection limit was 0.025 μg mL^?1. The repeatability of the method expressed as relative standard deviation was 6 % (n = 5). This method has been applied to the analysis of carbamazepine formulation samples with satisfactory relative recoveries ≤75 %.