Biosurfactant production under extreme environmental conditions by an efficient microbial consortium, ERCPPI-2

The biosurfactant production potential of a new microbial consortium of Enterobacter cloacae and Pseudomonas sp. (ERCPPI-2) which was isolated from heavy crude oil-contaminated soil in the south of Iran, has been investigated under extreme environmental conditions. The isolated consortium produces a biosurfactant mixture with excessive oil spreading and emulsification properties. This consortium was able to grow and produce biosurfactant at temperatures up to 70 °C, pressures up to 6000 psia, salinities up to 15% (w/v), and in the pH range 4-10. Besides, the optimum biosurfactant production conditions were found to be 40 °C and 7.0 for the temperature and pH value, respectively. These conditions gave the best biosurfactant production of 1.74 g/1 when the cells were grown on a minimal salt medium containing 1.0% (w/v) olive oil, 1.0% (w/v) sodium nitrate supplemented with 1.39% (w/v) K(2)HPO(4) at 40 °C and 150 rpm after 48 h of incubation. The ERCPPI-2 could reduce surface and interfacial tensions to 31.7 and 0.65 mN/m from the original values of 58.3 and 16.9 mN/m, respectively. The isolated consortium produced biosurfactant using heavy crude oil as the sole source of carbon and emulsified the available heavy crude oil up to E(24)=83.4%. The results of the core holder flooding tests at simulated reservoir conditions demonstrated that the oil recovery efficiency due to the injection of the cell-free biosurfactant solution was 27.2%, and the bacterium injection reduced the final residual oil saturations to below 3% at optimum conditions.     

DNA biosensors based on metallo-intercalator probes and electrocatalytic amplification

Strategies for electrochemical sensing of DNA can be classified into label-free and label-based approaches, categories of which include enzyme-, nanomaterial- and redox labels that are attached to DNA either by covalent or non-covalent means. Metallointercalators represent one group of small molecule redox labels that non-covalently enter the groove of a DNA. The metallointercalator plays a dual-role in acting as a structure indicator (for hybridization) and a signal generator. Labeling is not needed, and electrochemical measurements can be carried out in a label-free solution of an electrolyte. However, such metallointercalators lack the option of catalytic signal generation as in the case of enzyme- and nanomaterial-based labels. Therefore, signal amplification becomes crucial. We first survey here recent progress in this area. A signal-amplifying system is presented that relies on the electroatalytic oxidation of a metallointercalator ruthenium(II)bipyridine/phenoxazine complex in the presence of electron donor species such as oxalate, DNA bases, or tripropylamine. Recent work on such DNA sensors is discussed. Results suggest that such metallointercalator-based DNA sensors represent a viable platform for developing high-throughput and automated PCR/lab-on-a-chip devices as well as visualized multifunctional DNA sensors.

Highly selective fluorescent recognition of Zn2+ based on naphthalene macrocyclic derivative

A new macrocyclic chemosensor containing two naphthalene fluorophores has been synthesized. The fluorescent properties of this receptor has been studied in the presence of various metal ions such as Na⁺, Ag⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺. When increasing concentrations of Zn²⁺ ions were introduced, the emission of L was drastically increased (EFE = 4.34). This special change was not observed when other metal ions were used; such highly selective fluorescent response indicates that this receptor can easily discriminate Zn²⁺ ions from other similar species. Model calculations at DFT level further suggest the possible interaction mode, and relatively steric position between the host and guest also influence the optical response.     

The critical re-evaluation of the aromatic/antiaromatic nature of Ti3(CO)3: a missed opportunity?

The nature of bonding and aromaticity of Ti(3)(CO)(3), a mill-shaped metal-carbonyl complex, is studied carefully. A unique bonding mechanism between metal and carbonyl groups is found in this species. Ti(3)(CO)(3) is an example of a metal-carbonyl complex with prominent metal to carbonyl donation. Moreover, it is proven that not only is Ti(3)(CO)(3) not an antiaromatic complex but also it is the first synthesized example of d-block, σ+π aromatic species. A quick survey among the first row of transition metals in the periodic table shows that other local minima with similar structures and aromaticity are present and Ti(3)(CO)(3) is the first synthesized species of an unknown family.     

An efficient method for recovery of target ssDNA based on amino-modified silica-coated magnetic nanoparticles

In this paper, an improved recovery method for target ssDNA using amino-modified silica-coated magnetic nanoparticles (ASMNPs) is reported. This method takes advantages of the amino-modified silica-coated magnetic nanoparticles prepared using water-in-oil microemulsion technique, which employs amino-modified silica as the shell and iron oxide as the core of the magnetic nanoparticles. The nanoparticles have a silica surface with amino groups and can be conjugated with any desired bio-molecules through many existing amino group chemistry. In this research, a linear DNA probe was immobilized onto nanoparticles through streptavidin conjugation using covalent bonds. A target ssDNA(I) (5′-TMR-CGCATAGGGCCTCGTGATAC-3′) has been successfully recovered from a crude sample under a magnet field through their special recognition and hybridization. A designed ssDNA fragment of severe acute respiratory syndrome (SARS) virus at a much lower concentration than the target ssDNA(I) was also recovered with high efficiency and good selectivity.     

Preparation,Characterization and Controlled Release Investigation of Biocompatible pH-Sensitive PVA/PAA Hydrogels

In the present research hydrogel films based on polyvinyl alcohol (PVA) and polyacrylic acid (PAA) blend, with various crosslink densities, have been prepared through different thermal treatment. The results of FTIR and DSC confirmed quality and quantity of conclusion on miscibility of PVA/PAA blends, respectively. Besides, biocompatibility of the samples has been proved in cytotoxicity tests using L929 cells, according to ISO10993–5. Water uptake of the hydrogel blends is measured. pH sensitivity properties of blends are studied with and without boiling in NaOH solutions where the effect of swelling in water before boiling has also been investigated. Preswellings in water and NaOH concentration have been found to be mainly effective on pH sensitivity of PVA/PAA blends. Biocompatibility and pH sensitivity behavior make these hydrogels appropriate candidates to orally deliver drugs such as insulin and peptides that can be released in basic pH of intestine. The stability of these films in acidic solutions and its expansion and also the consequent release of drugs in basic solutions have been studied by using Teofilin as a model drug by UV-spectrophotometeric measurements.     

Note on some s-shaped bifurcation curves

In this article we consider asymptotic behavior of some bifurcation curves of the two-point boundary value problem -u′ (x) =λf(u(x)) for 0 < x < 1; u(0) = u(1) = 0. Infact we prove that λ grows linearly with respective to p(p = u(1/2)) for p large     

Rapid and efficient sonochemical formation of gold nanoparticles under ambient conditions using functional alkoxysilane

Gold nanoparticles (NPs) are rapidly and efficiently formed under ambient conditions with a novel and highly-efficient sonochemical promoter. Despite of the presence of free oxygen, 3-glycidoxypropyltrimethoxysilane (GPTMS) showed remarkable efficiency in promoting the reduction rate of Au (III) than that of conventional promoters (primary alcohols). This is likely attributed to the formation of a variety of radical scavengers, which are alcoholic products from sonochemical hydrolysis of the epoxide group and methoxysilane moieties of GPTMS under weakly acidic conditions. Interestingly, the promotion is quenched by amine- or thiol-functionalized alkoxysilane, thereby producing marginal amounts of gold NPs. Furthermore, products of hydrolyzed GPTMS were confirmed to attach on the surface of gold NPs by attenuated total reflectance-Fourier transform infrared spectroscopy. However, according to transmission electron microscopy images, gold NPs that were produced in the presence of GPTMS tend to fuse with each other as condensation of silanols occurs, forming worm- or nugget-like gold nanostructures. The use of long chain surfactants (i.e. polyethylene glycol terminated with hydroxyl or carboxyl) inhibited the fusion, leading to mono-dispersed gold NPs. Additionally, the fact that this approach requires neither an ultrasound source with high frequency nor anaerobic conditions provides a huge advantage. These findings could potentially open an avenue for rapid and large-scale green-synthesis of gold NPs in future work.     

Application of experimental design for optimization of erbium determination by high-resolution continuum source electrothermal atomic absorption spectrometry using lanthanum as a chemical modifier

ABSTRACT

In this paper, lanthanum was used as a chemical modifier for the direct determination of erbium by high-resolution continuum source electrothermal atomic absorption spectrometry. A two-step experimental design was used for optimization, first a full factorial design was conducted for identification of significant factors, and then a central composite design was carried out for final optimization of the significant factors. The optimum parameters were obtained as follows: atomization temperature of 2500°C, pyrolysis temperature of 1600°C, and pyrolysis time of 10?s in the presence of lanthanum as a chemical modifier. Under optimum conditions, the characteristic mass, limit of detection, and limit of quantification were 29?pg, 0.71, and 2.4?µg?L^?1, respectively. The precision of the method, estimated as the relative standard deviation for 10 replicate measurements of 50?µg?L^?1 of erbium, was 1.8%. The optimized method was applied to determine erbium content in sediments and rock samples. The determined values of erbium in sediment certified reference materials were in satisfactory agreement with the certified values according to the t-test for a 95% confidence level.     

Monitoring real-time curing of epoxies in situ using single-sided NMR

Adhesively bonded joints using epoxy are widely used in aircraft and aerospace structures. Quality control and defect detection during epoxy curing in such applications is critical. We used single-sided nuclear magnetic resonance (NMR) to nondestructively probe and spatially resolve the change in the characteristic NMR relaxation time (T₂) of epoxies during curing on a substrate. Time-dependent T₂ values were fit to a Weibull function to model temporal changes in the NMR measurables. Our results demonstrate that the reduction in molecular mobility of various epoxy/curing agent mixtures occurs more rapidly at the interface than in the bulk. Further use of single-sided NMR to acquire spatially resolved T₂ data will provide a route for elucidatory epoxy curing studies. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 616–623