Rain Height in Relation to 0°C Isotherm Height Over Some Indian Tropical Locations and Rain Attenuation for an Indian South Coastal Station for Microwave and Millimeter Wave Communication Systems

There is a dearth of results on rain height over Indian tropical stations.The results on rain height in relation to 0°C isotherm height over four stations having different latitudes are presented in this paper. Four stations have been chosen in such a way that all have different latitudes and are located in different geographical regions having different local weather conditions. The seaonal variation of rain height in relation to 0°C isotherm height has been found to be appreciable over the station located in Indian east coast and Gujarat region, while seasonal variation is not significant at lower and intermediate probability levels over the stations located in Indian south-east coast and island. The prevailing local weather conditions over different stations also have been discussed. Based on observed rain heights and rain rates, the attenuation of radio wave at different frequencies lying in the range from 10 GHz to 150 GHz for different probability levels over Indian south-east coastal station have been deduced and presented in this paper.     

Experimental observation of dust circulation in unmagnetized cogenerated dusty plasma

The vortex motion of a dust cloud was experimentally observed in unmagnetized cogenerated dusty plasma in different experimental parameters. Particle image velocimetry analysis demonstrated that several vortex zones exist in the dust cloud at relatively low pressures (0.06 mbar (or 6 Pa)–0.08 mbar (or 8 Pa)) and low discharge voltages (peak‐to‐peak voltage 540–560 V), whereas in relatively high pressure (0.4 mbar (or 40 Pa)–0.7 mbar (or 70 Pa)) and high discharge voltage (peak‐to‐peak voltage 690–740 V), dust vortices formed in dense dust cloud with background plasma fluctuation.     

Role of buried ultra thin interlayer silicide on the growth of Ni film on Si(100) substrate

The presence of a buried, ultra-thin amorphous interlayer in the interface of room temperature deposited Ni film with a crystalline Si(100) substrate has been observed using cross sectional transmission electron microscopy (XTEM). The electron density of the interlayer silicide is found to be 2.02 e/?³ by specular X-ray reflectivity (XRR) measurements. X-ray diffraction (XRD) is used to investigate the growth of deposited Ni film on the buried ultra-thin silicide layer. The Ni film is found to be highly textured in an Ni(111) plane. The enthalpy of formation of the Ni/Si system is calculated using Miedema’s model to explain the role of amorphous interlayer silicide on the growth of textured Ni film. The local temperature of the interlayer silicide is calculated using enthalpy of formation and the average heat capacity of Ni and Si. The local temperature is around 1042 K if the interlayer compound is Ni₃Si and the local temperature is 1389 K if the interlayer compound is Ni₂Si. The surface mobility of the further deposited Ni atoms is enhanced due to the local temperature rise of the amorphous interlayer and produced highly textured Ni film. Received: 2 March 2000 / Accepted: 28 March 2000 / Published online: 11 May 2000     

Tween-80–n-Butanol–Diesel–Water Microemulsion System—A Class of Alternative Diesel Fuel

Tween-80–n–butanol–diesel–water microemulsion systems with various surfactant:cosurfactant (S:C) ratio have been reported as a class of alternative diesel fuel from their phase behavior, clouding phenomena, conductivity, turbidity, and inflammation studies. Temperature induced clouding of microemulsion containing 2% brine at an S:C ratio of 1:1 from a suitable turbid zone has been examined to see the stability of the diesel–water microemulsion systems. Regression models have been proposed to understand the impact of various components of the microemulsion on their cloud point (CP) values. Conductivity of the microemulsions at various S:C ratio increases with the volume of brine having two cut points depicting the presence of three microheterogenous phases within the system, whereas turbidity shows a linear increase. Dye-probed investigation of water-rich and oil-rich zones of the microemulsions indicates the involvement of a dynamic mass transfer process within the various zones. The intensities of flames produced during burning of the microemulsions with various O:E:W weight percentages selected from the isotropic regions of the phase diagrams have been estimated using MATLAB image processing method and the impacts of various components on the fuel use of the microemulsions have been analyzed.     

Evidence for Electron Transfer between Graphene and Non-Covalently Bound π-Systems

Hybridizing graphene and molecules possess a high potential for developing materials for new applications. However, new methods to characterize such hybrids must be developed. Herein, the wet-chemical non-covalent functionalization of graphene with cationic π-systems is presented and the interaction between graphene and the molecules is characterized in detail. A series of tricationic benzimidazolium salts with various steric demand and counterions was synthesized, characterized and used for the fabrication of graphene hybrids. Subsequently, the doping effects were studied. The molecules are adsorbed onto graphene and studied by Raman spectroscopy, XPS as well as ToF-SIMS. The charged π-systems show a p-doping effect on the underlying graphene. Consequently, the tricationic molecules are reduced through a partial electron transfer process from graphene, a process which is accompanied by the loss of counterions. DFT calculations support this hypothesis and the strong p-doping could be confirmed in fabricated monolayer graphene/hybrid FET devices. The results are the basis to develop sensor applications, which are based on analyte/molecule interactions and effects on doping.     

Optical and static dielectric study of a terminally fluorinated liquid crystalline compound

Optical and static dielectric studies on a terminally fluorinated liquid crystalline compound have been carried out. Measurements of temperature variation of refractive indices of the compound are done by using thin prism method. A four-parameter model is validated by fitting the experimentally measured values of refractive indices, birefringence and average refractive indices of the compound with the theoretical ones. Refractive index and density data are utilized for determination of orientational order parameter. The temperature variation of dielectric permittivities of the compound are measured by a LCR meter.     

Fabrication of PECVD-grown fluorinated hydrocarbon nanoparticles and circular nanoring arrays using nanosphere lithography

Nanosphere lithography (NSL) masks were created by spin-coating of polystyrene particles onto silicon surfaces. Fluorinated hydrocarbon films were coated on the nanosphere lithography masks using plasma-enhanced chemical vapor deposition (PECVD) to obtain ordered arrays of fluorinated hydrocarbon. Atomic force microscope images show hexagonally ordered nanodots of dimension 225 ± 11 nm with a height of 23 ± 4 nm. Every hexagon encloses a circular ring of diameter 540 ± 24 nm having a height and width of 13.5 ± 0.6 nm and 203 ± 16 nm, respectively. FTIR analysis shows two distinct zones of atomic bonding of CH_x and CF_x in the plasma coated ordered fluorinated hydrocarbon films.     

Aggregation‐Induced and Polymorphism‐Dependent Thermally Activated Delayed Fluorescence (TADF) Characteristics of an Oligothiophene: Applications in Time‐Dependent Live Cell Multicolour Imaging

Typically, molecules with a twisted donor–acceptor (D‐A) architecture have been exploited for constructing thermally activated delayed fluorescence (TADF) materials. Herein, we report the first example of a thiophene‐based thermally activated delayed fluorescent molecule without a D‐A architecture. Compound 1 (2,5‐bis(2,2‐di(thiophen‐2‐yl)vinyl)thiophene) is conformationally flexible and shows weak fluorescence in the solution state but displays bright TADFin both condensed and solid states. Compound 1 crystallized in two different polymorphs ( 1 a and 1 b ). Interestingly, both polymorphs show distinctly different TADF features. The broad spectral features and the TADF characteristics of 1 have been explored for the time‐dependent multicolor (green, yellow and red) imaging of living cells.     

Interaction of moderately reactive molecules with organic superhalogens: a theoretical perspective

The interaction of four moderately reactive molecules (MRMs), benzene (BZ), water, ammonia and silicon dioxide, with three aromatic organic superhalogens (OSHs) has been investigated at the density functional theory (DFT) level. The strength of the interaction is analysed from the distortions in the structures of both the MRMs and OSHs after complexation and the calculated binding energy (BE) values between the two interacting moieties. The interaction becomes stronger as we move from BZ to H₂O to NH₃ and strongest for SiO₂ molecule. Contributions from different terms in total interaction energy have been examined by energy decomposition analysis (EDA). The charge flow values between MRMs and OSHs, and Mulliken spin density localised on the moderately reactive molecules have been evaluated to ensure whether the interaction is ionic or not. Atoms in Molecules (AIM) analysis has been performed to characterise the bonds formed between the two. Overall, our study gives a comprehensive account of the interaction between the moderately reactive molecules and three theoretically designed aromatic organic superhalogens, which will further motivate researchers in the field of superhalogen chemistry.     

Boron-Containing Lipids and Liposomes: New Conjugates of Cholesterol with Polyhedral Boron Hydrides

A series of boron-containing lipids were prepared by reactions of cyclic oxonium derivatives of polyhedron boranes and metallacarboranes (closo-dodecaborate anion, cobalt and iron bis(dicarbollides)) with amine and carboxylic acids which are derived from cholesterol. Stable liposomal formulations, on the basis of synthesized boron-containing lipids, hydrogenated soybean l -α-phosphatidylcholine and (HSPC) 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DSPE-PEG) as excipients, were prepared and then characterized by dynamic light scattering (DLS) that revealed the formation of particles to be smaller than 200 nm in diameter. The resulting liposomal formulations showed moderate to excellent loading and entrapment efficiency, thus justifying the design of the compounds to fit in the lipid bilayer and ensuring ease of in vivo use for future application. The liposomal formulations based on cobalt and iron bis(dicarbollide)-based lipids were found to be nontoxic against both human breast normal epithelial cells MCF-10A and human breast cancer cells MCF-7.