Configuration assignments and decay of 126La high-spin bands

High spin states of ¹²⁶La have been populated using the reaction ¹¹⁶Sn+¹⁴N at 68 MeV. γ-rays and conversion electrons were detected with the GAREL array. Multipolarities of the lowest-lying in-band dipole transitions have been determined from the deduced internal conversion coefficients. Experimental B(M1)/B(E2) ratios have been derived for the bands and compared with calculated values using the D?nau-Frauendorf geometrical model. Configurations are proposed for the bands comparing them with cranked shell model calculations and on the basis of the measured B(M1)/B(E2) ratios. The β-decay of ¹²⁶La has also been revisited. The population of the ¹²⁶Ba levels gives a probable spin value of five for the decaying high-spin ¹²⁶La state with T _1/2≈ 64 s which may indicate a signature inversion in the πh_11/2νh_11/2 band. Received: 12 October 1999     

Quantum Probes for the Characterization of Nonlinear Media

Active optical media leading to interaction Hamiltonians of the form H=λ˜(a+a†)ζ represent a crucial resource for quantum optical technology. In this paper, we address the characterization of those nonlinear media using quantum probes, as opposed to semiclassical ones. In particular, we investigate how squeezed probes may improve individual and joint estimation of the nonlinear coupling λ˜ and of the nonlinearity order ζ. Upon using tools from quantum estimation, we show that: (i) the two parameters are compatible, i.e., the may be jointly estimated without additional quantum noise; (ii) the use of squeezed probes improves precision at fixed overall energy of the probe; (iii) for low energy probes, squeezed vacuum represent the most convenient choice, whereas for increasing energy an optimal squeezing fraction may be determined; (iv) using optimized quantum probes, the scaling of the corresponding precision with energy improves, both for individual and joint estimation of the two parameters, compared to semiclassical coherent probes. We conclude that quantum probes represent a resource to enhance precision in the characterization of nonlinear media, and foresee potential applications with current technology.     

A reference-gene-based quantitative PCR method as a tool to determine <Emphasis Type="Italic">Fusarium</Emphasis> resistance in wheat

In recent years, plant breeders made great progress in breeding Fusarium-tolerant wheat lines. However, total resistance to this genus of plant pathogenic fungi has not yet been achieved as the resistance genes are located on several distinct genetic regions. Visual scoring of disease symptoms in combination with the analysis of mycotoxins is commonly applied to assess the tolerance of new lines. Both approaches are indirect methods and do not mandatorily determine the accumulated fungal biomass. Quantitative PCR is a useful tool to assess fungal biomass based on the abundance of organism-specific DNA. The aim of this study was the development of a quantitative PCR assay for trichothecene-producing Fusarium species and to adapt this method for resistance assessment of wheat lines artificially infected with Fusarium graminearum and Fusarium culmorum. Several DNA-extraction methods for wheat samples were evaluated and optimized for downstream real-time PCR analysis and furthermore, a new reference-gene-based approach for more accurate quantification of Fusarium biomass in cereals is presented. The co-determination of a plant gene was used to compensate for unequal DNA-extraction efficiencies.     

Coupling versus surface-etching reactions of alkyl halides on GaAs(100): I. CF3CH2I reactions

We report the rich surface chemistry exhibited by the reactions of 1,1,1-trifluoroethyl iodide (CF3CH2I) adsorbed onto gallium-rich GaAs(100)-(4 x 1), studied by temperature-programmed desorption (TPD) and low-energy electron diffraction (LEED) studies and X-ray photoelectron spectroscopy (XPS). CF3CH2I adsorbs molecularly at 150 K but dissociates, below room temperature, to form a chemisorbed monolayer of CF3CH2 and I species. Recombinative desorption of molecular CF3CH2I competes with the further reactions of the CF3CH2 and I chemisorbed species. The CF3CH2 species can either undergo beta-fluoride elimination to yield gaseous CF2=CH2 or it can undergo self-coupling to form the corresponding higher alkane, CF3CH2CH2CF3. A second coupling product, CF3CH2CH=CF2, is also evolved, and it is postulated that migratory insertion of the liberated CF2=CH2 into the surface-carbon bond of the chemisorbed CF3CH2 is responsible for its formation. The iodines, formed by C-I scission in the chemisorbed CF3CH2I, and the fluorines, derived from beta-fluoride elimination in CF3CH2, react with the surface gallium dimers, and Ga-As back-bonds to generate five etch products (GaF, AsF, GaI, AsI, and As2) that desorb in the temperature range of 420 to >600 K. XPS data reveal that the surface stoichiometry remains constant throughout the entire annealing temperature range because of the desorption of both gallium- and arsenic-containing etch products, which occur sequentially. In this article, plausible mechanisms by which all products form and the binding sites of these reactions in the (4 x 1) reconstruction are discussed. Factors that control the rate constants of etch product versus hydrocarbon product formation and in particular how they impact on the respective desorption temperatures will be discussed.     

Mechanochemical formation of a 1:1 C60: tert-butylcalix[4]azulene supramolecular complex: solid-state NMR and DFT computational studies

Abstract

Solid-state NMR data are presented to clearly support the formation of a 1:1 supramolecular complex between C₆₀ and the tetra-tert-butylated analogue of calix[4]azulene by a simple mechanochemical hand-grinding of host and guest in a mortar and pestle. The experimental results are supported by a DFT study.     

Characterization of classical Gaussian processes using quantum probes

We address the use of a single qubit as a quantum probe to characterize the properties of classical noise. In particular, we focus on the characterization of classical noise arising from the interaction with a stochastic field described by Gaussian processes. The tools of quantum estimation theory allow us to find the optimal state preparation for the probe, the optimal interaction time with the external noise, and the optimal measurement to effectively extract information on the noise parameter. We also perform a set of simulated experiments to assess the performances of maximum likelihood estimator, showing that the asymptotic regime, where the estimator is unbiased and efficient, is approximately achieved already after few thousands repeated measurements on the probe system.     

EB/UV treatment of protective coatings for porous materials

A method for improving surface properties of porous inorganic materials is presented. The method is particularly tailored to cement-based materials in order to obtain properties suitable for mechanical applications such as dies manufacturing, where hardness, abrasion resistance and low friction are requested. The coating system is based upon using two coatings of different characteristics. The underlying base coating layer is infiltrated in air on three different formulations of hardened cement composite. Two different bi-component resins, one relatively soft and the other relatively hard, were tested as underlying surface coating. The outer surface coating, based upon a bi-component resin characterized by high hardness, is added after hardening and curing of the first layer. Both coatings were chemically hardened and then cured with EB. UV curing is also suitable for the outer surface coating. An experimental campaign was carried out in order to evaluate the influence of radiation processing as curing treatment with reference to particular investigated materials. Hardness and resistance to peeling of coating systems have been measured and are presented.     

Pigments and enamelling/gilding technology of Mamluk mosque lamps and bottle

On‐site Raman spectroscopy is used to investigate four mosque lamps and a bottle dating back to the 13–14th centuries (Syria and/or Egypt, Mamluk period) from the Department of Islamic Art, Musée du Louvre, Paris. The pigments and the enamelled glass matrix have been identified in order to discuss their technology. A comparison is made with one masterpiece from the 19th century made by Brocard. The results obtained for blue (lapis lazuli or Co‐coloured glass), yellow (Naples yellows or zinc/chrome yellow), green (mixture of the aforementioned blue and yellow pigments or lead chromate for restorated foot) red (hematite), white (cassiterite or arsenate) and pink (hematite and cassiterite) pigments are presented. The consistency of the pigments period of use/technology with the datation proposed for each artefact is evaluated. For one lamp, the detection of quartz in some places of the hematite‐rich glassy layer supporting the gold is related to the search of a physical bonding with the artefact body. Carbon residues in such enamel are consistent with the use of an organic medium to place the enamel powder before the firing. Copyright © 2012 John Wiley & Sons, Ltd.