CO2 Capture by Hydroxylated Azine-Based Covalent Organic Frameworks

Covalent organic frameworks (COFs) RIO-13, RIO-12, RIO-11, and RIO-11m were investigated towards their CO₂ capture properties by thermogravimetric analysis at 1 atm and 40 °C. These microporous COFs bear in common the azine backbone composed of hydroxy-benzene moieties but differ in the relative number of hydroxyl groups present in each material. Thus, their sorption capacities were studied as a function of their textural and chemical properties. Their maximum CO₂ uptake values showed a strong correlation with an increasing specific surface area, but that property alone could not fully explain the CO₂ uptake data. Hence, the specific CO₂ uptake, combined with DFT calculations, indicated that the relative number of hydroxyl groups in the COF backbone acts as an adsorption threshold, as the hydroxyl groups were indeed identified as relevant adsorption sites in all the studied COFs. Additionally, the best performing COF was thoroughly investigated, experimentally and theoretically, for its CO₂ capture properties in a variety of CO₂ concentrations and temperatures, and showed excellent isothermal recyclability up to 3 cycles.     

Molecular dynamics and quantum chemical approaches in the study of the hydration of protonated cyclohexyldiamines

Explicit hydration of the neutral and charged cyclohexylamine and of the cyclohexyldiamine isomers in their mono- or diprotonated forms is investigated through classical molecular dynamics (MD) simulations in aqueous solutions combined with DFT calculations in amine–water complexes. The MD studies performed in the monoamines reveal that the structure of the hydration shell around the neutral amino group (NH₂) is quite distinct from that around the charged one (NH₃⁺). On average, the number of water molecules surrounding the two groups is calculated to be ～2 and 3–4, respectively. The variation of the hydration structure prompted by the groups’ proximity is discussed based on the data found for the mono- and diprotonated diamines. To have a more detailed picture of the water molecules’ arrangement around the amino groups and of the amine–water hydrogen bonds, geometry optimisations in hydrates with up to six water molecules are carried out at the B3LYP/aug-cc-pVDZ level. Complexation energies are also computed. The main findings emerging from these calculations are found to be very helpful to rationalise the mutual influence of the amino groups and therefore to better elucidate the MD findings. The complementary nature of the two research methods is emphasised as an excellent tool in order to closely examine the hydration of polyamines, as exemplified for the cyclohexyldiamines.     

Pigment Production by Filamentous Fungi on Agro-Industrial Byproducts: an Eco-Friendly Alternative

The search for new sources of natural pigments has increased, mainly because of the toxic effects caused by synthetic dyes used in food, pharmaceutical, textile, and cosmetic industries. Fungi provide a readily available alternative source of natural pigments. In this context, the fungi Penicillium chrysogenum IFL1 and IFL2, Fusarium graminearum IFL3, Monascus purpureus NRRL 1992, and Penicillium vasconiae IFL4 were selected as pigments producers. The fungal identification was performed using ITS and part of the β-tubulin gene sequencing. Almost all fungi were able to grow and produce water-soluble pigments on agro-industrial residues, with the exception of P. vasconiae that produced pigments only on potato dextrose broth. The production of yellow pigments was predominant and the two strains of P. chrysogenum were the largest producers. In addition, the production of pigments and mycotoxins were evaluated in potato dextrose agar using TOF-MS and TOF-MS/MS. Metabolites as roquefortine C, chrysogine were found in both extracts of P. chrysogenum, as well fusarenone X, diacetoxyscirpenol, and neosolaniol in F. graminearum extract. In the M. purpureus extract, the pigments monascorubrin, rubropunctatin, and the mycotoxin citrinin were found. The crude filtrates have potential to be used in the textile industry; nevertheless, additional pigment purification is required for food and pharmaceutical applications.     

A numerical analysis of a class of generalized Boussinesq‐type equations using continuous/discontinuous FEM

An improved class of Boussinesq systems of an arbitrary order using a wave surface elevation and velocity potential formulation is derived. Dissipative effects and wave generation due to a time‐dependent varying seabed are included. Thus, high‐order source functions are considered. For the reduction of the system order and maintenance of some dispersive characteristics of the higher‐order models, an extra O(μ²ⁿ⁺²) term (n ∈ ?) is included in the velocity potential expansion. We introduce a nonlocal continuous/discontinuous Galerkin FEM with inner penalty terms to calculate the numerical solutions of the improved fourth‐order models. The discretization of the spatial variables is made using continuous P₂ Lagrange elements. A predictor‐corrector scheme with an initialization given by an explicit Runge–Kutta method is also used for the time‐variable integration. Moreover, a CFL‐type condition is deduced for the linear problem with a constant bathymetry. To demonstrate the applicability of the model, we considered several test cases. Improved stability is achieved. Copyright © 2011 John Wiley & Sons, Ltd.     

Applicability of Microaerobic Technology to Enhance BTEX Removal from Contaminated Waters

As the addition of low concentrations of oxygen can favor the initial degradation of benzene, toluene, ethylbenzene, and xylenes (BTEX) compounds, this work verified the applicability of the microaerobic technology to enhance BTEX removal in an anaerobic bioreactor supplemented with high and low co-substrate (ethanol) concentrations. Additionally, structural alterations on the bioreactor microbiota were assessed throughout the experiment. The bioreactor was fed with a synthetic BTEX-contaminated water (~ 3 mg L^?1 of each compound) and operated at a hydraulic retention time of 48 h. The addition of low concentrations of oxygen (1.0 mL min^?1 of atmospheric air at 27 °C and 1 atm) assured high removal efficiencies (> 80%) for all compounds under microaerobic conditions. In fact, the applicability of this technology showed to be viable to enhance BTEX removal from contaminated waters, especially concerning benzene (with a 30% removal increase), which is a very recalcitrant compound under anaerobic conditions. However, high concentrations of ethanol adversely affected BTEX removal, especially benzene, under anaerobic and microaerobic conditions. Finally, although bacterial community richness decreased at low concentrations of ethanol, in general, the bioreactor microbiota could deal with the different operational conditions and preserved its functionality during the whole experiment.     

Certification of nitrate in spinach powder reference material SPIN-1 by high-precision isotope dilution GC–MS

A high-precision exact-matching quadruple isotope dilution method (ID⁴MS) was employed for the quantitation of nitrate in an air-dried spinach powder Certified Reference Material (CRM). The analyte was extracted in hot water following addition of ¹⁵NO\({}_{3}^{-}\) internal standard. The blend was then treated with sulfamic acid to remove nitrite and with triethyloxonium tetrafluoroborate to promote aqueous conversion of nitrate into volatile EtONO₂. The derivative was analyzed by headspace GC–MS with 3-min elution time. The method performance was validated with a series of tests which demonstrated adequate selectivity and ruggedness. This method supported the development of novel SPIN-1 CRM giving a modest contribution to its uncertainty (u_char = 0.85%). With respect to previous attempts, the SPIN-1 was proven stable, homogeneous (u_hom = 0.44%), and suitable for spinach monitoring under EU regulations. On dried basis, the nitrate content of SPIN-1 was found to be 22.53 ± 0.43 mg/g (U_c = 1.9%, k = 2). The material was also used in an inter-laboratory study where four laboratories employed a total of ten measurement methods.

SPIN-1 Certified Reference Material for nitrate in spinach powder

     

Development of a method for quantitative determination of the cytotoxic agent piplartine (piperlongumine) in multiple skin layers

This study reports the development of a simple and reproducible method, with high rates of recovery, to extract the cytotoxic agent piplartine from skin layers, and a sensitive and rapid UV‐HPLC method for its quantification. Considering the potential of piplartine for topical treatment of skin cancer, this method may find application for formulation development and pharmacokinetics studies to assess cutaneous bioavailability. Porcine skin was employed as a model for human tissue. Piplartine was extracted from the stratum corneum (SC) and remaining viable skin layers (VS) using methanol, vortex homogenization and bath sonication, and subsequently assayed by HPLC using a C₁₈ column, and 1:1 (v/v) acetonitrile–water (adjusted to pH 4.0 with acetic acid 0.1%) as mobile phase. The quantification limit of piplartine was 0.2 μg/mL (0.6 μm ), and the assay was linear up to 5 μg/mL (15.8 μm ), with within‐day and between‐days assay coefficients of variation and relative errors <15%. Piplartine recovery from SC and VS varied from 86 to 96%. The method was suitable to assay samples from skin penetration studies, enabling detection of differences in cutaneous delivery in different skin compartments resulting from treatment with various formulations and time periods.     

Bursting synchronization in networks with long-range coupling mediated by a diffusing chemical substance

Many networks of physical and biological interest are characterized by a long-range coupling mediated by a chemical which diffuses through a medium in which oscillators are embedded. We considered a one-dimensional model for this effect for which the diffusion is fast enough so as to be implemented through a coupling whose intensity decays exponentially with the lattice distance. In particular, we analyzed the bursting synchronization of neurons described by two timescales (spiking and bursting activity), and coupled through such a long-range interaction network. One of the advantages of the model is that one can pass from a local (Laplacian) type of coupling to a global (all-to-all) one by varying a single parameter in the interaction term. We characterized bursting synchronization using an order parameter which undergoes a transition as the coupling parameters are changed through a critical value. We also investigated the role of an external time-periodic signal on the bursting synchronization properties of the network. We show potential applications in the control of pathological rhythms in biological neural networks.     

Viscosity Mixing Rules for Binary Systems Containing One Ionic Liquid

In this work the applicability of four of the most commonly used viscosity mixing rules to [ionic liquid (IL)+molecular solvent (MS)] systems is assessed. More than one hundred (IL+MS) binary mixtures were selected from the literature to test the viscosity mixing rules proposed by 1) Hind (Hi), 2) Grunberg and Nissan (G–N), 3) Herric (He) and 4) Katti and Chaudhri (K–C). The analyses were performed by estimating the average (absolute or relative) deviations, AADs and ARDs, between the available experimental data and the predicted ideal mixture viscosity values obtained by means of each rule. The interaction terms corresponding to the adjustable parameters inherent to each rule were also calculated and their trends discussed.