Thorough evaluation of the validity of conventional enantio-gas chromatography in the analysis of volatile chiral compounds in mandarin essential oil: A comparative investigation with multidimensional gas chromatography

The present research is focused on the determination of the enantiomeric distribution of chiral compounds, contained in mandarin essential oils, by means of conventional chiral gas chromatography with flame ionization detection (enantio-GC-FID); the results attained were compared with those derived from heart-cutting multidimensional GC-mass spectrometry (MDGC/MS), to evaluate the reliability of the monodimensional technique as a tool for quality control. The Deans-switch MDGC system was equipped with two GC ovens, which were connected via a heated transfer line, a flame ionization detector (FID1) in the first dimension and a quadrupole MS as second-dimension detector. The a priori knowledge of potential co-elutions concerning target compounds (an enantiomer and an interfering compound), when using enantio-GC-FID, could enable the use of corrected enantiomer excess values. Correction factors could be calculated through a preliminary GC-FID analysis (using an apolar column), considering the peak areas of the known interferences. The method used for the calculation of a so-called “coelution correction factor” is described, along with some examples.     

β-Phenylproline: the high β-turn forming propensity of proline combined with an aromatic side chain

The conformational propensities of the proline analogue bearing a phenyl substituent attached to the β carbon, in either a cis or a trans configuration relative to the carbonyl group, have been investigated. The behaviour of cis- and trans(βPh)Pro has been compared with that of proline in homochiral and heterochiral dipeptide sequences. NMR and IR studies as well as X-ray diffraction analysis provide evidence that the β-phenyl substituent does not disrupt the tendency of proline to occupy the i+1 position of a β-turn. The puckering of the pyrrolidine ring is significantly affected by the presence of the aromatic substituent, which tends to occupy positions that minimize steric repulsions. As a consequence, this substituent adopts specific well-defined orientations, which are more restricted for the cis derivative. Interactions between this aromatic group and that in the adjacent phenylalanine residue may be responsible for some of the conformational differences observed among the different peptides studied.     

Boron‐Containing Probes for Non‐optical High‐Resolution Imaging of Biological Samples

Boron has been employed in materials science as a marker for imaging specific structures by electron energy loss spectroscopy (EELS) or secondary ion mass spectrometry (SIMS). It has a strong potential in biological analyses as well; however, the specific coupling of a sufficient number of boron atoms to a biological structure has proven challenging. Herein, we synthesize tags containing closo‐1,2‐dicarbadodecaborane, coupled to soluble peptides, which were integrated in specific proteins by click chemistry in mammalian cells and were also coupled to nanobodies for use in immunocytochemistry experiments. The tags were fully functional in biological samples, as demonstrated by nanoSIMS imaging of cell cultures. The boron signal revealed the protein of interest, while other SIMS channels were used for imaging different positive ions, such as the cellular metal ions. This allows, for the first time, the simultaneous imaging of such ions with a protein of interest and will enable new biological applications in the SIMS field.     

Structural flexibility and role of vicinal 2-thienyl rings in 2,3-dicyano-5,6-di(2-thienyl)-1,4-pyrazine, [(CN)2Th2Pyz], its palladium(II) complex [(CN)2Th2Pyz(PdCl2)2], and the related pentametallic pyrazinoporphyrazines [(PdCl2)4Th8TPyzPzM] (M = Mg(II)(H2O), Zn(II))

The solid state and solution structure of 2,3-dicyano-5,6-di(2-thienyl)-1,4-pyrazine, [(CN)(2)Th(2)Pyz], and its Pd(II) derivative, [(CN)(2)Th(2)Pyz(PdCl(2))(2)]·H(2)O, formed by reaction of [(CN)(2)Th(2)Pyz] with [(C(6)H(5)CN)(2)PdCl(2)] were characterized by X-ray, UV-visible, (1)H and (13)C NMR, and extended X-ray absorption fine structure (EXAFS) spectral measurements. The X-ray crystal structure of [(CN)(2)Th(2)Pyz] shows the presence of one thienyl ring positioned orthogonal to the rest of the molecule, with the two vicinal thienyl rings lying orthogonal to each other in a rare arrangement. NMR studies of [(CN)(2)Th(2)Pyz] in the solid state and in solutions of dimethylformamide or dimethyl sulfoxide confirm a nonequivalence of the thienyl rings in the solid state and also in solution. EXAFS results indicate that two distinct Pd(II) coordination sites are formed at the di(2-thienyl)pyrazino moiety of [(CN)(2)Th(2)Pyz(PdCl(2))(2)]·H(2)O, with identical Pd-N(pyz) (2.03(3) ?) and Pd-Cl (2.36(3) ?) bond lengths but with different Pd-S1 (2.25(4) ?) and Pd-S2 (3.21(5) ?) bond distances in an overall asymmetric molecular framework. Density functional theory (DFT) and time-dependent DFT (TDDFT) theoretical studies also provide information about the structure and spectral behavior of the precursor and its metalated Pd(II) derivative. (1)H/(13)C NMR and UV-visible spectral measurements were also carried out on two heteropentametallic porphyrazine macrocycles which were prepared by a reaction of PdCl(2) with [Th(8)TPyzPzM] where Th(8)TPyzPz = tetrakis-2,3-[5,6-di-(2-thienyl)-pyrazino]porphyrazinato dianion and M = Mg(II)(H(2)O) or Zn(II). Spectroscopic data on the newly synthesized [(PdCl(2))(4)Th(8)TPyzPzM] compounds suggest that the binding of PdCl(2) involves coordination sites of the type S(2(th))PdCl(2) with the two thienyl rings of each di(2-thienyl)pyrazino fragment bound to Pd(II) in an equivalent manner ("th-th" coordination). This is similar to what was found for the corresponding octapyridinated analogues ("py-py" coordination).     

Trimethoxysilylpolymethacrylate as new material for stone conservation. Porosimetric and colorimetric investigations

Aimed to obtain new materials for the conservation of stone substrates, we report here on the synthesis of a polymer which has been obtained by inducing polymerization on a methacrylate monomer functionalized by alchoxysilane groups. Two lithotypes, the Comiso calcarenite and Mistretta quartzite, stones largely used in artworks of north-eastern Sicily, were treated with the above polymer and its conserving efficacy evaluated in terms of porosimetric features, hydric properties and appearance. The collected data were compared to those provided, under the same experimental conditions, by an ethylmethacrylate/methylmethacrylate copolymer and an alkylalchoxysilane, products widely employed in the protection of stones. Experiments aimed to test the durability of the above polymer against UV artificial ageing are also reported.     

Synthesis of 1-(4-substituted)benzyl-6-hydroxyisoquinolines with potential activity on NA+,K+-atpase

The synthesis of 1-(4-substituted)benzyl-6-hydroxyisoquinolines, to be evaluated in the displacement of the specific ³H-ouabain binding to Na⁺,K⁺-ATPase, is described. The key step involved a cyclization to the isoquinoline ring under Pictet-Gams conditions which was best performed with the 6-hydroxy group protected as the benzyl ether. When an unsaturated ester group was present in position 4 of the 1-benzyl group, this was best introduced before the cyclization step, since the IIeck reaction on 1-(4-bromobenzyl)-6-hydroxyisoquinoline ( 8 ) with acrylic acid derivatives was not successful in all cases.     

Mechanically-based approach to non-local elasticity: Variational principles

The mechanically-based approach to non-local elastic continuum, will be captured through variational calculus, based on the assumptions that non-adjacent elements of the solid may exchange central body forces, monotonically decreasing with their interdistance, depending on the relative displacement, and on the volume products. Such a mechanical model is investigated introducing primarily the dual state variables by means of the virtual work principle. The constitutive relations between dual variables are introduced defining a proper, convex, potential energy. It is proved that the solution of the elastic problem corresponds to a global minimum of the potential energy functional. Moreover, the Euler–Lagrange equations together with the natural boundary conditions associated to the total potential energy functional are established with variational calculus and they coincide with analogous relations already obtained by means of mechanical considerations. Numerical analysis of a tensile specimen has been introduced to show the capabilities of the proposed approach.     

Understanding the mechanism of direct visible-light-activated [2 + 2] cycloadditions mediated by Rh and Ir photocatalysts: combined computational and spectroscopic studies

The mechanism of [2 + 2] cycloadditions activated by visible light and catalyzed by bis-cyclometalated Rh(iii) and Ir(iii) photocatalysts was investigated, combining density functional theory calculations and spectroscopic techniques. Experimental observations show that the Rh-based photocatalyst produces excellent yield and enantioselectivity whereas the Ir-photocatalyst yields racemates. Two different mechanistic features were found to compete with each other, namely the direct photoactivation of the catalyst–substrate complex and outer-sphere triplet energy transfer. Our integrated analysis suggests that the direct photocatalysis is the inner working of the Rh-catalyzed reaction, whereas the Ir catalyst serves as a triplet sensitizer that activates cycloaddition via an outer-sphere triplet excited state energy transfer mechanism.

The mechanism of [2 + 2] cycloadditions activated by visible light and catalyzed by bis-cyclometalated Rh(iii) and Ir(iii) photocatalysts was investigated, combining density functional theory calculations and spectroscopic techniques.