Simultaneous spectrofluorimetric determination of europium, dysprosium, gadolinium and terbium using chemometric methods

A spectrofluorimetric method for the simultaneous determination of dysprosium, europium, gadolinium and terbium in ternary and quaternary mixtures by the use of pyridine-2,6-dicarboxylic acid as a chelating agent was developed. The influence of chemical variables affecting the analytical reaction was evaluated. A partial least-squares procedure and PC Quant software were used to assess data obtained from a variable number of calibration solutions and wavelengths. The ensuing method was validated by applying it to the analysis of synthetic ternary (Eu-Dy-Tb) and quaternary mixtures (Eu-Dy-Gd-Tb) over the concentration ranges 60-550 mug Eu l(-1), 30-400 mug Dy l(-1) and 30-400 mug Tb l(-1) in the former, and 20-220 mug Eu l(-1), 20-235 mug Dy l(-1), 25-230 mug Gd l(-1) and 75-230 mug Tb l(-1) in the latter. The results obtained by using the two quantitation procedures are compared. The relative errors in the determinations were less than 8% in most cases.     

CO(2) Fixation by Novel Copper(II) and Zinc(II) Macrocyclic Complexes. A Solution and Solid State Study

Solutions containing Zn(II) and Cu(II) complexes with [15]aneN(3)O(2) rapidly adsorb atmospheric CO(2) to give {[ZnL](3)(&mgr;(3)-CO(3))}.(ClO(4))(4) (2) and {[CuL](3)(&mgr;(3)-CO(3))}.(ClO(4))(4) (4) complexes. The crystal structures of both complexes have been solved (for 2, space group R3c, a, b = 22.300(5) ?, c = 17.980(8) ?, V = 7743(4) ?(3), Z = 6, R = 0.0666, R(w)(2) = 0.1719; for 4, space group R3c, a, b = 22.292(7) ?, c = 10.096(8) ?, V = 7788(5) ?(3), Z = 6, R = 0.0598, R(w)(2) = 0.1611), and the spectromagnetic behavior of 4 has been studied. In both compounds a carbonate anion triply bridges three metal cations. Each metal is coordinated by one oxygen of the carbonate, three nitrogens, and an oxygen of the macrocycle; the latter donor weakly interacts with the metals. Although the two compounds are isomorphous, they are not isostructural, because the coordination geometries of Zn(II) in 2 and Cu(II) in 4 are different. The mixed complex {[CuZn(2)L(3)](&mgr;(3)-CO(3))}.(ClO(4))(4) has been synthesized. X-ray analysis (space group R3c, a, b = 22.323(7) ?, c = 17.989(9) ?, V = 7763(5) ?(3), Z = 6, R = 0.0477, R(w)(2) = 0.1371) and EPR measurements are in accord with a &mgr;(3)-carbonate bridging one Cu(II) and two Zn(II) ions in {[CuZn(2)L(3)](&mgr;(3)-CO(3))}(4+). Both the Zn(II) and Cu(II) cations exhibit the same coordination sphere, almost equal to that found in the trinuclear Zn(II) complex 2. The systems Zn(II)/L and Cu(II)/Lhave been studied by means of potentiometric measurements in 0.15 mol dm(-)(1) NaCl and in 0.1 mol dm(-)(3) NaClO(4) aqueous solutions; the species present in solution and their stability constants have been determined. In both systems [ML](2+) species and hydroxo complexes [M(II)LOH](+) (M = Zn, Cu) are present in solution. In the case of Cu(II), a [CuL(OH)(2)] complex is also found. The process of CO(2) fixation is due to the presence of such hydroxo-species, which can act as nucleophiles toward CO(2). In order to test the nucleophilic ability of the Zn(II) complexes, the kinetics of the promoted hydrolysis of p-nitrophenyl acetate has been studied. The [ZnLOH](+) complex promotes such a reaction, where the Zn(II)-bound OH(-) acts as a nucleophile to the carbonyl carbon. The equilibrium constants for the addition of HCO(3)(-) and CO(3)(2)(-) to the [ZnL](2+) complex have been potentiometrically determined. Only [ML(HCO(3))](+) and [ML(CO(3))] species are found in aqueous solution. A mechanism for the formation of {[ML](3)(&mgr;(3)-CO(3))}.(ClO(4))(4) is suggested.     

Analytic correlated wave functions in momentum space and related properties of helium like ions

We obtain analytic correlated wave functions in momentum space as the Fourier transform of correlated wave functions which are able to incorporate almost all of the correlation energy for the ground-state of two-electron atoms. Then we study the atomic momentum-density, the Compton profile and the elastic and inelastic scattering factors for this kind of wave functions. The scattering factors are also compared with the ones provided by a more accurate correlated wave function. All the calculations can be analytically performed, provided the correlated wave function in position space has been determined.     

A Formal Total Synthesis of (+)-Methyl Trachyloban-18-oate and (+)-Methyl 16-Oxo-17-norkauran-18-oate: Regio- and Diastereoselective Preparation of Methyl (13S)-13-Hydroxyisoatisiren-18-oate from (−)-Abietic Acid

A novel preparation of methyl (13S)-13-hydroxyisoatisiren-18-oate ( 4 ), a key-intermediate in a synthesis of (+)-methyl trachyloban-18-oate ((+)- 1 ), from (?)-abietic acid, is described. Since (?)- 1 has been previously converted into (?)-methyl 16-oxo-17-norkauran-18-oate ((?)- 16 ), our preparation of 4 constitutes also a formal total synthesis, from (?)-abietic acid, of (+)- 16 . Key steps in this approach were the allene photoaddition to podocarp-8(14)-en-13-one ( 5 ) and the conversion of the endo-toluene-4-sulfonate 11 into the exo-benzoate 12b .     

Water-soluble gold nanoparticles protected by fluorinated amphiphilic thiolates

The preparation and the properties of gold nanoparticles (Au NPs) protected by perfluorinated amphiphiles are described. The thiols were devised to form a perfluorinated region close to the gold surface and to have a hydrophilic portion in contact with the bulk solvent to impart solubility in water. The monolayer protected clusters were prepared, in an homogeneous phase using sodium thiolates because of the low nucleophilicity of the alpha-perfluorinated thiols, and fully characterized with (1)H, (19)F NMR spectrometry, IR and UV-vis absorption spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Au NPs with core diameters ranging from 1.6 to 2.9 nm, depending on the reaction conditions, were obtained. Water-soluble NPs (MPC-F8-PEGs) were obtained with the thiol HS-F8-PEG ending with a short poly(ethylene glycol) unit (PEG-OMe 550), whereas thiols with shorter PEG chains give rise to NPs insoluble in water. MPC-F8-PEGs undergo an exchange reaction with amphiphilic alkyl thiols. ESR investigations, using a hydrophobic radical probe, indicate that the MPC-F8-PEG monolayer shows a greater hydrophobicity compared to the analogous hydrogenated monolayer.     

Study of the magnetorheological response of aqueous magnetite suspensions stabilized by acrylic acid polymers

In this paper we describe the magnetorheological (MR) behavior of aqueous suspensions consisting of magnetite particles stabilized by poly(acrylic acid) polymers (PAA). A previous work on the colloidal stability of the same systems for different pH values and polymer concentrations demonstrated that the addition of PAA polymers has a very significant effect on the stability. In the present contribution, we study the MR effect of the suspensions stabilized by two different commercial polymers, as a function of pH, magnetic field strength and magnetite volume fraction. All the results are discussed in terms of the interfacial properties of the systems. It is demonstrated that for a given concentration of micrometer particles, the rheological response strongly depends on pH, on the volume fraction of magnetite particles, on the type of polymer added for increasing the stability and on the magnetic field strength. Changing the polymer used provokes clear rheological differences for the same sample conditions (field strength, volume fraction and pH). This is suggested to be due to the hydrophobic/hydrophilic balance of the polymer affecting the magnetic field ability to form magnetic structures by aggregation of the magnetized particles. The results are compared to the predictions of the so-called standard chain model, based on the assumption that the MR effect is the result of the balance between the magnetic interactions (tending to establish some degree of order in the suspension by formation of particle chains in the direction of the field) and hydrodynamic ones (tending to destroy the formed structures by viscous stress on the chains). It is found that the behavior of the yield stress does not agree well with the predictions of the model when the relative proportion of both particle and polymer confers optimum stability to the dispersions. This is likely due to the fact that the presence of the stabilizing polyelectrolyte provokes that the magnetic field is not as effective in structuring the suspension as deduced from the chain model.     

Marine derived polysaccharides for biomedical applications: chemical modification approaches

Polysaccharide-based biomaterials are an emerging class in several biomedical fields such as tissue regeneration, particularly for cartilage, drug delivery devices and gelentrapment systems for the immobilization of cells. Important properties of the polysaccharides include controllable biological activity, biodegradability, and their ability to form hydrogels. Most of the polysaccharides used derive from natural sources; particularly, alginate and chitin, two polysaccharides which have an extensive history of use in medicine, pharmacy and basic sciences, and can be easily extracted from marine plants (algae kelp) and crab shells, respectively. The recent rediscovery of poly-saccharidebased materials is also attributable to new synthetic routes for their chemical modification, with the aim of promoting new biological activities and/or to modify the final properties of the biomaterials for specific purposes. These synthetic strategies also involve the combination of polysaccharides with other polymers. A review of the more recent research in the field of chemical modification of alginate, chitin and its derivative chitosan is presented. Moreover, we report as case studies the results of our recent work concerning various different approaches and applications of polysaccharide-based biomaterials, such as the realization of novel composites based on calcium sulphate blended with alginate and with a chemically modified chitosan, the synthesis of novel alginate-poly(ethylene glycol) copolymers and the development of a family of materials based on alginate and acrylic polymers of potential interest as drug delivery systems.     

Reactions of indoles with nitrogen dioxide and nitrous acid in an aprotic solvent

The reaction of 2-phenyl- and 1-methyl-2-phenylindole with nitrogen dioxide or with nitrous acid (NaNO2-CH3COOH) in benzene leads mainly to the formation of the isonitroso and 3-nitroso indole derivatives, respectively. When reacted with nitrous acid, 1-methyl-2-phenylindole gives also the corresponding azo-bis-indole in good yields. The reaction of indole with nitrogen dioxide leads to 2-(indol-3-yl)-3H-indol-3-one as the main product together with small amounts of 2-(indol-3-yl)-3H-indol-3-oxime; whereas the major product obtained when the same indole is reacted with nitrous acid is represented by 2-(indol-3-yl)-3H-indol-3-oxime. The reaction of 3-alkyl substituted indoles with nitrogen dioxide is rather complex and results in the formation of different nitro indoles, whereas nitrosation is observed when nitrous acid is used. Crystal structures of 2-(indol-3-yl)-3H-indol-3-one and of 4-nitro-N-acetyltryptamine have been determined by X-ray analysis.     

Applications of chiral C3-symmetric molecules

Throughout history symmetry and chirality have inspired artists and scientists alike. Given that rotational axes are the only elements of symmetry compatible with chirality, it is not surprising that C2- and C3-symmetrical molecules have attracted considerable attention. In recent years, the aesthetic appeal of C2-symmetrical molecules has been translated into many widely-used applications some of which are of commercial importance by its exploitation in the area of asymmetric catalysis. In contrast, exploitation of the arguably greater aesthetic appeal of C3-symmetric molecules is still in its infancy. This review, which surveys the applications of chiral C3-symmetrical molecules in the areas of asymmetric catalysis, molecular recognition and nanoarchitecture, has been designed with a view to identifying some of the most promising areas of application of these very beautiful molecules.     

Colloidal stability of magnetite/poly(lactic acid) core/shell nanoparticles

In this work, we describe an experimental investigation on the colloidal stability of suspensions of three kinds of particles, including magnetite, poly(lactic acid) (PLA), and composite core/shell colloids formed by a magnetite core surrounded by a PLA shell. The experiments were performed with dilute suspensions, so that recording the optical absorbance with time gives a suitable indication of the aggregation and sedimentation of the suspensions. The method allowed us to distinguish very accurately between the different surface and magnetic forces responsible for the structures acquired by particle aggregates. Thus, the pure PLA suspensions are very sensitive to ionic strength and almost unaffected by pH changes. On the contrary, the stability of magnetite systems is mainly controlled by pH. The effect of vertical magnetic fields on the stability of magnetite and magnetite/PLA suspensions is also investigated. The PLA shell reduces the magnetic responsiveness of magnetite, but it is demonstrated that the mixed particles can also form structures induced by the field, despite their lower magnetization, and they can be considered in magnetically targeted biomedical applications.