Investigation of the Crystallisation Behaviour of Lead Titanate (PT), Lead Zirconate (PZ) and Lead Zirconate Titanate (PZT) by EXAFS-Spectroscopy and X-Ray Diffraction

Two solid solutions of lead zirconium titanates PbZr _x Ti_{1 – x} O₃ (x = 0.1 and 0.35) as well as the reference compounds lead titanate and lead zirconate were prepared from zirconium and titanium n-propoxide, dissolved in 2-methoxyethanol, by sol-gel process. The amorphous products after pyrolysis of the dried gels and the crystalline phases were studied by EXAFS spectroscopy to monitor the structural changes from the amorphous oxide mixture to the crystalline ceramics after calcination. Additionally, the crystalline phases were identified by X-ray diffraction (XRD).It follows from the analysis of the EXAFS data that the local order of the amorphous phases seems to be completely different from that of the crystalline phase. There is no indication of a preformation of the local order of the perovskite structure. The analysis of our EXAFS spectra can be interpreted very consistently with the assumption that in the amorphous samples a segregation exists on molecular level and the low crystallisation temperatures are a consequence of very short diffusion paths.     

From supramolecular block copolymers to advanced nano-objects

The formation of asymmetric bis-complexes, based on terpyridine ligands and ruthenium ions, is described as a powerful tool for the self-assembly of polymer blocks end-functionalized with terpyridine units. This is illustrated in this contribution for the synthesis of amphiphilic metallo-supramolecular block copolymers, which are further used to produce aqueous micelles. Finally, the reversibility of the supramolecular bond opens new avenues for the preparation and manipulation of these nano-objects.     

Cluster and periodic DFT calculations of MgO/Pd(CO) and MgO/Pd(CO)(2) surface complexes

The bonding and vibrational properties of Pd(CO) and Pd(CO)(2) complexes formed at the (100) surface of MgO have been investigated using the gradient-corrected DFT approach and have been compared to the results of infrared and thermal desorption experiments performed on ultrathin MgO films. Two complementary approaches have been used for the calculation of the electronic properties: the embedded cluster method using localized atomic orbital basis sets and supercell periodic calculations using plane waves. The results show that the two methods provide very similar answers, provided that sufficiently large supercells are used. Various regular and defect adsorption sites for the Pd(CO) and Pd(CO)(2) have been considered: terraces, steps, neutral and charged oxygen vacancies (F and F(+) centers), and divacancies. From the comparison of the computed and experimental results, it is concluded that the most likely site where the Pd atoms are stabilized and where carbonyl complexes are formed are the F(+) centers, paramagnetic defects consisting of a single electron trapped in an anion vacancy.     

Temperature-dependent behavior of a symmetric long-chain bolaamphiphile with phosphocholine headgroups in water: from hydrogel to nanoparticles

The temperature-dependent self-assembly of the single-chain bolaamphiphile dotriacontan-1,1'-diyl-bis[2-(trimethylammonio)ethyl phosphate] (PC-C32-PC) was investigated by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), X-ray scattering, rheological measurements, and dynamic light scattering (DLS). At room temperature this compound, in which two phosphocholine headgroups are connected by a C(32) alkyl chain, proved to be capable of gelling water very efficiently by forming a dense network of nanofibers (Kohler et al. Angew. Chem., Int. Ed. 2004, 43, 245). A specific feature of this self-assembly process is that it is not driven by hydrogen bonds but solely by hydrophobic interactions of the long alkyl chains. The nanofibers have a thickness of roughly the molecular length and show a helical superstructure. A model for the molecular structure of the fibrils which considers the extreme constitution of the bolaamphiphile is proposed. Upon heating the suspensions three different phase transitions can be detected. Above 49 degrees C, the temperature of the main transition where the alkyl chains become "fluid", a clear low-viscosity solution is obtained due to a breakdown of the fibrils into smaller aggregates. Through mechanical stress the gel structure can be destroyed as well, indicating a low stability of these fibers. The gel formation is reversible, but as a drastic rearrangement of the molecules takes place, metastable states occur.     

Self-assembly approach toward magnetic silica-type nanoparticles of different shapes from reverse block copolymer mesophases

In the present study poly(isoprene-block-ethylene oxide), PI-b-PEO, block copolymers are used to structure iron oxide and silica precursors into reverse mesophases, which upon dissolution of the organic matrix lead to well-defined nanoparticles of spheres, cylinders, and plates based on the original structure of the mesophase prepared. The hybrid mesophases with sphere, cylinder, and lamellar morphologies containing the inorganic components in the minority phases are characterized through a combination of small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), and electron energy loss spectroscopy (EELS). After heat treatments the respective nanoparticles on mica surfaces are characterized by scanning force microscopy (SFM). X-ray diffraction (XRD) and superconducting quantum interference device (SQUID) magnetometer measurements are performed to demonstrate that the heat treatment leads to the formation of a magnetic gamma-Fe2O3 crystalline phase within the amorphous aluminosilicate. The results pave the way to functional, i.e., magnetic nanoparticles where the size, shape, and iron oxide concentration can be controlled opening a range of possible applications.     

Chemical Bonding and Pressure‐Induced Change of the Electron Configuration of Ytterbium in β‐YbAgGa2

Single‐phase polycrystalline samples of the intermetallic compound β‐YbAgGa₂ were synthesized by inductive heating and subsequent annealing for eight weeks at 670 K. Magnetic properties were characterized by susceptibility measurements and indicated intermediate valence of ytterbium at ambient pressure. Angle‐dispersive X‐ray powder diffraction data of orthorhombic β‐YbAgGa₂ indicate stability of the phase in the investigated pressure range from 0.1 MPa (ambient pressure) to 19 GPa. The pressure‐induced volume decrease is accompanied by an increase of the effective valence from 2.17 at ambient conditions to 2.71 at 16 GPa as evaluated by X‐ray absorption spectroscopy at the Yb L_III threshold. Analysis of the chemical bonding in β‐YbAgGa₂ by integrating the electron density of the polyanion in basins as defined by the electron localization function results in an electron count Yb^2.7+[(Ag^0.2—)(Ga1(3b)^1.0—)(Ga2(4b)^1.5—)]. This finding is close to the expected values calculated by means of the Zintl rules and fits well the results of magnetic susceptibility measurements and XAS investigations.     

Detection of traces of oxidized and reduced sulfur compounds in small samples by combination of different high-performance liquid chromatography methods

Depending on the sulfur species, picomoles of different inorganic sulfur compounds can be detected and separated by HPLC in one arrangement in a sample volume less than 50 μl. The combination of fluorescence labelling of reduced inorganic sulfur compounds such as sulfide (S²⁻), sulfite(SO₃²⁻ and thiosulfate (S₂O₃²⁻) with monobromobimane followed by an extraction of elemental sulfur (S°) by chloroform treatment enables the detection of all mentioned sulfur compounds as well as sulfate (remaining aqueous phase) in the same sample. While the derivatized sulfur compounds could be detected by their fluorescence emission at 480 nm, elemental sulfur is identified by its UV absorption at 263 nm. Sulfate in the remaining aqueous phase is detected by HPLC with indirect UV detection at 254 nm. Detection ranges for the different sulfur compounds examined are as follows: sulfide (5 μM to 1.5 mM), sulfite (5 μM to 1.0 mM), thiosulfate (1 μM to 1.5 mM), elemental sulfur (2 μM to 32 mM) and sulfate (5 μM to >1 mM).     

Bordismus verzweigter Überlagerungen von Niedrigdimensionalen Sphären

The concept of bordism between branched coverings is a generalization of the concept of regular homotopy between such maps as given in [3].The main result of this article states that for n=2,3 any two branched coverings of the n-sphere with a finite and equal number of sheets are bordant.

---

---

Diese Arbeit entstand während eines Aufenthaltes des Autors am Sonderforschungsbereich Theoretische Mathematik der Universität Bonn.