Discovery of 5-Methylthiazole-Thiazolidinone Conjugates as Potential Anti-Inflammatory Agents: Molecular Target Identification and In Silico Studies

A series of previously synthesized 5-benzyliden-2-(5-methylthiazole-2-ylimino)thiazoli- din-4-one were evaluated for their anti-inflammatory activity on the basis of PASS predictive outcomes. The predictive compounds were found to demonstrate moderate to good anti-inflammatory activity, and some of them displayed better activity than indomethacin used as the reference drug. Structure–activity relationships revealed that the activity of compounds depends not only on the nature of the substituent but also on its position in the benzene ring. The most active compounds were selected to investigate their possible mechanism of action. COX and LOX activity were determined and found that the title compounds were active only to COX-1 enzymes with an inhibitory effect superior to the reference drug naproxen. As for LOX inhibitory activity, the derivatives failed to show remarkable LOX inhibition. Therefore, COX-1 has been identified as the main molecular target for the anti-inflammatory activity of our compounds. The docking study against COX-1 active site revealed that the residue Arg 120 was found to be responsible for activity. In summary, the 5-thiazol-based thiazolidinone derivatives have been identified as a novel class of selective COX-1 inhibitors.     

分级骨架和多层的Pt-Ni纳米晶体用于高效氧还原和甲醇氧化反应

燃料电池是电动汽车和电子设备最有前途的清洁能源之一.Pt催化剂在氧还原反应(ORR)和甲醇氧化反应(MOR)中的电催化性能对电池系统的能源效率和电池的价格起着至关重要的作用,因此设计高效的电催化剂以最大限度地提高铂的利用率,从而增强电催化效果、降低成本,已经成为燃料电池发展的一个重要方向.早期的研究表明,铂基催化剂可以有效地提高电催化性能,并且它们的组成和形貌被认为是影响催化剂活性的两个关键因素.至今,已合成出各种各样的Pt基催化剂,如Pt-Pb/Pt核壳纳米盘、Pt3Co凹面立方体、Pt-Cu-Rh纳米笼、Pt-Pd纳米枝晶等,其中纳米枝晶结构的催化剂表现出很好的氧还原性能,其高效的催化活性被认为是暴露出的较高的比表面积促进了电子转移以及拥有较多的Pt活性位点.本文采用简单的溶剂热法合成了具有大比表面积的Pt-Ni分层骨架结构(Pt-Ni HSNs)催化剂,为了验证反应物所起的作用,通过收集不同反应时间下的产物和控制单一变量,我们发现在合成配方中加入H2SO4是此类Pt-Ni纳米晶体成功生长的关键触发因素.在H2SO4的诱导下,Pt和Ni原子倾向于沉积在(111)面,促使Pt-Ni合金沿晶面方向生长为八面体结构,在此过程中发生了粒子自组装成长以及相分离过程,最后我们用酸蚀法制造了Pt-Ni HSNs,并通过TEM,XRD和XPS表征其微观结构及组成,证实了Pt-Ni HSNs已经形成合金结构.在酸性条件下,Pt-Ni HSNs在ORR反应中展示出比商业Pt/C更好的活性.在0.9 V时的质量活性为1.25 A mgpt–1,是商业Pt/C质量活性的8.9倍,并且在10000圈的耐久性测试中,Pt-Ni HSNs的质量活性仅仅损失了21.6％,远低于Pt/C损失的活性比例.Tafel曲线和旋转环盘测试结果表明,Pt-Ni HSNs在ORR反应中发生的是4电子过程,证实了它的高活性.另外,在酸性溶液中,Pt-Ni HSNs表现出了比商业Pt/C更好的MOR催化活性,且抗CO中毒能力更强.这可归因于两点:(1)Pt-Ni HSNs是由多个小颗粒组装而成,大大提高了与电解液的接触面积;(2)它独特的骨架结构减少了颗粒间团聚的可能性,有利于质子的转移.本文为设计先进的铂基电催化剂提供了一种新的自组装方法.     

Trace Elements in Pleurotus Ostreatus,P. Eryngii,and P. Nebrodensis Mushrooms Cultivated on Various Agricultural By-Products

Abstract

Mushrooms are efficient accumulators of essential and toxic elements. Although oyster (Pleurotus spp.) mushrooms are widely commercialized and consumed, few data exist regarding trace elements content and bioaccumulation in cultivated P. ostreatus and P. eryngii, while no data are available for P. nebrodensis. The contents of Al, As, Ba, Cd, Co, Cr, Cs, Cu, Fe, K, Mn, Na, Ni, Pb, Rb, Sr, V, and Zn were monitored using inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (AES) in P. ostreatus, P. eryngii, and P. nebrodensis mushrooms and their cultivation substrates that include wheat straw (WHS), grape marc (GMC), olive leaves (OLV), and two-phase olive mill wastes (OMW), separately or in mixtures. Bioaccumulation factors (BAFs) less than 0.3 were obtained for Al, Ba, Co, Cr, Fe, Mn, Ni, Pb, Sr, and V; BAFs exceeding 1 for K?>?Zn?>?Cd?>?Cr?>?Rb?>?As, while the BAFs for Na were less 0.7. Mushrooms grown on OLV and OMW presented lower BAFs than those grown on WHS and GMC for all elements except for K, Cd, and Cu. P. ostreatus was an effective accumulator for Cr, Fe, and Zn; P. eryngii for Al, Cs, Ni, and V; and P. nebrodensis for As and Cd. The estimated daily intakes (μg kg^?1 body weight) from mushroom consumption were less than 0.010 for As, Cd, Co, Cs, Pb, and V, 0.010–0.10 for Ba, Cr, Ni, and Sr, 0.10–5.0 for Al, Cu, Fe, Mn, Rb, and Zn, 65–83 for Na, and 858–1030 for K. Overall, the mushrooms studied provide significant amounts of K, adequate amounts of Mn and Zn and low amounts of Na and toxic elements.     

A click-flipped enzyme substrate boosts the performance of the diagnostic screening for Hunter syndrome

We report on the unexpected finding that click modification of iduronyl azides results in a conformational flip of the pyranose ring, which led to the development of a new strategy for the design of superior enzyme substrates for the diagnostic assaying of iduronate-2-sulfatase (I2S), a lysosomal enzyme related to Hunter syndrome. Synthetic substrates are essential in testing newborns for metabolic disorders to enable early initiation of therapy. Our click-flipped iduronyl triazole showed a remarkably better performance with I2S than commonly used O-iduronates. We found that both O- and triazole-linked substrates are accepted by the enzyme, irrespective of their different conformations, but only the O-linked product inhibits the activity of I2S. Thus, in the long reaction times required for clinical assays, the triazole substrate substantially outperforms the O-iduronate. Applying our click-flipped substrate to assay I2S in dried blood spots sampled from affected patients and random newborns significantly increased the confidence in discriminating between these groups, clearly indicating the potential of the click-flip strategy to control the biomolecular function of carbohydrates.

Click-triggered flip of the conformation of a sulfated iduronyl azide afforded a superior enzyme substrate to screen for Hunter syndrome.     

Surfactant-induced forces between carbon nanotubes

Dissipative particle dynamics simulations are employed to study surfactant-mediated forces between a pair of perpendicular carbon nanotubes (CNTs) coated by surfactants which form spherical micelles in bulk solution and on the tubes. Two force regimes are observed: at small tube/tube distances the force is attractive, whereas it is repulsive at larger distances. The attractive regime is dominated by a central micelle binding the tubes, while in the repulsive regime the contact region is depleted. The two regimes are separated by a discontinuous transition. The repulsive regime is critical for stabilizing CNT suspensions. Viewing rebundling as a thermally activated process, a connection between the repulsive force and the rebundling rate is established. We find that a larger hydrophilic surfactant headgroup creates a stronger and longer ranged tube/tube force, which reduces the rebundling rate significantly. The longer range originates directly from the further reaching head corona of the adsorbed surfactant layer. The larger magnitude of the force appears to be related to the axial compression force the adsorbed phase can sustain. This compression force appears to be the most critical factor for suspension design.     

Asymmetric potentials and motor effect: a homogenization approach

We provide a mathematical analysis for the appearance of motor effects, i.e., the concentration (as Dirac masses) at one side of the domain, for the solution of a Fokker–Planck system with two components, one with an asymmetric potential and diffusion and one with pure diffusion. The system has been proposed as a model for motor proteins moving along molecular filaments. Its components describe the densities of different conformations of proteins.     

Square wave anodic stripping voltammetry determination of eco-toxic metals in samples of biological and environmental importance

Square wave anodic stripping voltammetry was used in simultaneous determinations of eco-toxic metals (Pb, Cd, Cu and Zn) on bismuth film electrodes. The electrodes were prepared in situ on a glassy-carbon electrode (GCE) from 0.1 M acetate buffer (pH 4.5) containing 200 μg L^?1 of bismuth (III), as well ex situ on electrochemically oxidized graphitized polyacrylonitrile carbon fibres from 200 mg L^?1 Bi(NO₃)₃ in 1% HNO₃ (aqueous) solution. Preparation of a Bi-modified carbon fibre electrode (CFE) was by cation exchange of Bi⁺³ ions for H⁺ of the acidic surface groups of the electro-oxidized carbon fibres, followed by electrochemical reduction to Bi⁰. For the Bi-GCE the linear range was 20–280 μg L^?1 for zinc, 10–100 μg L^?1 for lead, 10–80 μg L^?1 for copper, and 5–50 μg L^?1 for cadmium. For the Bi-CFE it was 20–160 μg L^?1 for zinc, 10–100 μg L^?1 for lead, 10–100 μg L^?1 for copper, and 2–120 μg L^?1 for cadmium. For both kinds of bismuth modified carbon electrodes, low limits of detection and satisfactory precision were achieved. The method was successfully applied to certified reference materials of biological (bovine liver) and environmental (mussel tissue) importance.      

Modification of Guanine with Photolabile N‐Hydroxypyridine‐2(1H)‐thione: Monomer Synthesis,Oligonucleotide Elaboration,and Photochemical Studies

The photochemistry of N‐hydroxypyridine‐2(1H)‐thione (NHPT), inserted as a photolabile modifier at the 6‐position of 2′‐deoxyguanosine or guanosine, has been evaluated. In particular, 6‐[(1‐oxidopyridin‐2‐yl)sulfanyl]‐ ( 1a ) and 6‐[(pyridin‐2‐yl)sulfanyl]‐2′,6‐dideoxyguanosine ( 2a ), novel photolabile derivatives of the natural nucleosides, were synthesized and characterized. The observed photolysis products of 1a in organic solvents could only be rationalized by assuming a rapid equilibrium with the corresponding 6‐[(2‐thioxopyridin‐1(2H)‐yl)oxy] analogue 3a (Scheme 5). Transient spectroscopy of 1a indicated a strong triplet‐excited state suitable for triplet → triplet energy transfer or singlet‐oxygen generation. The NHPT function was stable enough for (slightly modified) automated solid‐phase oligonucleotide synthesis. The utility of the above compounds is discussed, as well as their potential use in photosensitization of reactive oxygen species in DNA.     

Integrated analytical techniques for the study of ancient Greek polychromy

The materials used in the decoration of three painted astragaloi (knucklebones) from the Koroneia cave (Greece) were investigated by means of sequential application of non-destructive and destructive techniques: optical microscopy, environmental scanning electron microscopy coupled with X-ray microanalysis (ESEM-EDX), Fourier transform infrared spectroscopy (FTIR) with micro-attenuated total reflection (μ-ATR) technique, high performance liquid chromatography (HPLC) coupled with UV-fluorescence and gas chromatography-mass spectrometry (GC-MS) were used.The main results highlighted that the three astragaloi were prepared with a ground of ochre or iron clay and painted with a proteinaceous matter such as binder egg tempera. Both FTIR and GC-MS agree in the detection of lipids that can be related to egg. Organic dyestuffs identified as madder lake and shellfish purple were used together with inorganic pigments.     

Impact of Pre-Patterned Structures on Features of Laser-Induced Periodic Surface Structures

The efficiency of light coupling to surface plasmon polariton (SPP) represents a very important issue in plasmonics and laser fabrication of topographies in various solids. To illustrate the role of pre-patterned surfaces and impact of laser polarisation in the excitation of electromagnetic modes and periodic pattern formation, Nickel surfaces are irradiated with femtosecond laser pulses of polarisation perpendicular or parallel to the orientation of the pre-pattern ridges. Experimental results indicate that for polarisation parallel to the ridges, laser induced periodic surface structures (LIPSS) are formed perpendicularly to the pre-pattern with a frequency that is independent of the distance between the ridges and periodicities close to the wavelength of the excited SPP. By contrast, for polarisation perpendicular to the pre-pattern, the periodicities of the LIPSS are closely correlated to the distance between the ridges for pre-pattern distance larger than the laser wavelength. The experimental observations are interpreted through a multi-scale physical model in which the impact of the interference of the electromagnetic modes is revealed.