氘化物阴极真空弧放电光斑分布

氘化物真空弧放电在许多领域均有应用,如无损检测、石油探井、中子活化分析等。和金属阴极不同,氘化物阴极放电时会释放大量的气体分子,表现出许多不同性质。采用放大镜头和ICCD相机观察了氘化物阴极真空弧放电光斑分布。测量系统的空间分辨率约为5 μm,时间分辨率最小2 ns。放电脉冲半高全宽（FWHM）0.9 μs,弧流波形为半周期正弦波。实验结果表明,氘化物真空弧放电时,所有阴极斑聚集为一个群落,表现为一个大光斑;在液滴作用下,阴极斑群落偶尔也会分裂为两个或多个群落;光斑形状不受弧流影响,但面积和亮度会随弧流增加而增大。氘化物阴极放电斑点聚集有利于产生高密度等离子体,提高放电效率。     

C-Mg掺杂GaN电子结构和光学性质的第一性原理研究

基于密度泛函理论第一性原理的方法,计算了GaN、C单掺、Mg单掺和C-Mg共掺体系的电子结构和光学性质,计算结果表明:掺杂后,GaN体系的晶格发生畸变,有利于光生空穴-电子对的分离,C-Mg共掺体系结构最稳定,掺杂体系的禁带宽度均减小,其中C-Mg共掺体系的禁带宽度最小,在禁带中引入了杂质能级,说明掺杂可有效降低电子跃迁所需的能量.在光学性质方面,掺杂后,GaN在低能区介电峰和吸收峰均发生红移,且静介电常数增大;其中C-Mg共掺体系的对可见光的吸收最强,极化能力最强,因此C-Mg共掺将有望提高GaN在光催化性能和极化能力.     

压水堆核电站燃料组件弯曲对堆芯中子学的影响分析计算

在压水堆核电站中,由于燃料组件装配的压紧力、冷却剂流动、辐射蠕变、燃耗等因素会导致燃料组件的弯曲,燃料组件的弯曲对组件间的水隙分布产生影响,从而影响中子的慢化行为及堆芯的传热性能,进而对反应堆堆芯的运行参数造成影响。本文分析了组件弯曲的成因及机理、影响及后果（包括对堆芯功率分布、径向功率倾斜、焓升因子、热点因子等参数的影响）,并使用蒙特卡罗软件JMCT,对组件弯曲的确定论计算程序的正确性进行了验证。最后通过确定论的计算程序模块,对CPR1000核电站的组件弯曲情况进行了模拟分析,计算结果表明:在某一燃耗下,随着水隙增加或减小,燃料组件功率会随之增加或减小,使堆芯的功率分布发生倾斜,影响核电站的安全运行。     

含氘电极真空弧等离子体空间分布特性诊断研究

真空弧放电等离子体含有多种离子成分,并且各离子在空间上具有不同的分布规律.本文针对金属氘化物电极真空弧离子源,搭建了一台紧凑型磁分析装置,用来研究放电等离子体中氘离子与金属离子的空间分布.当离子源弧流为100 A左右时,该装置能有效地传输引出束流,并且具有较好的二次电子抑制效果,可准确获得各离子流强.利用该装置测量并获得了氘化钛含氘电极真空弧放电等离子体内氘离子和钛离子空间分布规律,结果表明:径向上,氘离子和钛离子都呈高斯分布,但氘离子分布均匀,而钛离子相对集中在轴线附近,导致轴线附近氘离子比例最低;轴向上,所有离子数量都以自然指数函数减少,而且相对幅度接近,所以氘离子比例几乎不变.本文研究结果不仅有助于理解真空弧放电等离子体膨胀过程,还可以指导金属氘化物电极真空弧离子源及其引出设计.     

激光惯性约束聚变中光学汤姆逊散射研究进展

当前,激光惯性约束聚变在越来越接近点火的极端能量密度条件下,实验与模拟的偏离逐渐增大,一个关键原因是缺乏对黑腔等离子体状态及其影响黑腔能量学和内爆对称性的细致研究和判断。光学汤姆逊散射主动式、诊断精确、参数完备的优点,使之成为激光惯性约束聚变黑腔等离子体状态参数精密诊断的标准方法。中国面向激光惯性约束聚变研究的光学汤姆逊散射实验技术的发展与神光系列激光装置的建设和在其上开展的物理实验紧密相关。近年来,四倍频汤姆逊散射实验技术在神光III原型和100 kJ激光装置上相继建立,部分实验结果不仅加深了对激光惯性约束聚变靶物理的认识,还反映了实验条件对汤姆逊散射诊断的影响,促进了实验技术的精密化发展。在未来,还需要进一步发展多支路汤姆逊散射、五倍频汤姆逊散射和超热相干汤姆逊散射等新技术,面向点火黑腔条件,大幅提升激光等离子体状态参数的诊断精度,开展新物理机制的探索和研究,在激光惯性约束聚变和其他高能量密度物理科学领域发挥更重要的作用。     

Fast Liquid Phase Epitaxial Growth for Perovskite Single Crystals

Semiconductors grown by the solution-processed method have shown low-cost,facile fabrication process and comparable performance.However,there are many reasons why it is difficult to achieve high quality films.For example,lattice constant mismatch is one of the problems when photovoltaic devices made of organ metallic perovskites.In this work,MAPbBr^{MA=CH3NH3^+}perovskites single crystals grown on the surface of MAPbBr2.5 CI0.5 perovskites single crystals via liquid epitaxial growth method is demonstrated.It is found that when the lattice constants of the two perovskite single crystals are matched,another crystal can be grown on the surface of one crystal by epitaxial growth.The whole epitaxy growth process does not require high heating temperature and long heating time.X-ray diffraction method is used to prove the lattice plane of the substrate and the epitaxial grown layer.A scanning electron microscope is used to measure the thickness of the epitaxial layer.Compared with perovskite-based photodetectors without epitaxial growth layer,perovskite-based photodetectors with epitaxial growth layer have lower dark current density and higher optical responsibility.     

正火和回火处理过程中W/Fe/RAFM钢接头W/Fe界面组织和剪切性能的演化

对热等静压(HIP)扩散焊制备的W/Fe/RAFM钢接头进行了正火和回火处理,以恢复其中RAFM钢的组织和性能.采用电子探针微分析器(EPMA)和掠入射X射线衍射(GIXRD)对W/Fe界面组织的演化进行了分析,采用剪切测试和扫描电镜(SEM)对接头连接性能的演化进行了测试和分析.结果表明,正火处理后,RAFM钢中的C...     

Amorphous High-Entropy Hydroxides of Tunable Wide Solar Absorption for Solar Water Evaporation

The high-entropy materials have raised much attention in recent years due to their extraordinary performances in mechanical, catalysis, energy storage fields. Herein, a new type of high-entropy hydroxides (e.g., NiFeCoMnAl(OH)_x) that are amorphous and capable of broad solar absorption is reported. A facile one-pot co-precipitation method is employed to synthesize these amorphous high-entropy hydroxides (a-HEHOs) under ambient conditions. The a-HEHOs thus obtained display widely tunable bandgap (e.g., from 2.6 to 1.1 eV) due to their high-entropy and amorphous characteristics, enabling efficient light absorbance and photothermal conversion in the solar regime. Further solar water evaporation measurements show that the a-HEHOs delivered a considerable energy conversion efficiency of 55%, comparable to black titanium oxides that are synthesized using more complex and expensive methods.     

Parameter and state estimation algorithm for single-input single-output linear systems using the canonical state space models

This paper presents a new parameter and state estimation algorithm for single-input single-output systems based on canonical state space models from the given input–output data. Difficulties of identification for state space models lie in that there exist unknown noise terms in the formation vector and unknown state variables. By means of the hierarchical identification principle, those noise terms in the information vector are replaced with the estimated residuals and a new least squares algorithm is proposed for parameter estimation and the system states are computed by using the estimated parameters. Finally, an example is provided.     

A NEW PERTURBATION SIMPLEX ALGORITHM FOR LINEAR PROGRAMMING

1.IntroductionThedualsimplexalgorithm[1,91andtheprimal-dualsimplealgorithm[6]arewellknownandefficientsimplexvariants.However,bothofthemneedaninitialdualfeasiblebasistogetstarted,andthereforecannotbedirectlyappliedtosolvingproblemsthatdonothavesuchane...