Ambient temperature sol–gel synthesis of CeO2–SiO2 and TiO2–CeO2–SiO2 films with high efficiency of UV absorption and without destructive oxidation on heat sensitive organic substrate

Highly efficient UV absorption films of CeO₂–SiO₂ and TiO₂–CeO₂–SiO₂ were synthesized through an epoxide assisted sol–gel strategy. As proven by their UV–vis transmittance spectra, the obtained films show very strong absorption in the UV region, at the same time, keeping the high transparency in the visible range. Due to the unique chemistry of this route and the delicate selection of Ce precursor salts, the ceria in the film can be crystallized at ambient temperature, resulting in the effective UV absorption and oxidation minimization of the films. These advantages guarantee their application in the protection of heat-sensitive organic materials.     

Theoretical study on the reaction mechanisms of CH2SH + NO reaction

The mechanisms for the CH₂SH + NO reaction were investigated on both of the singlet and triplet PES at the BMC-CCSD//B3LYP/6-311+G(d,p) level. The results indicate that the singlet PES is much lower than the triplet PES energetically; therefore, the reaction occurs on the singlet PES dominantly. The most favorable channel on the singlet PES takes place by a barrierless addition of N atom to CH₂SH radical to form HSCH₂NO. Subsequently, the rearrangement of the initial adduct HSCH₂NO (IM1) to form another intermediate IM3 via a four-center transition state, followed by the C–O bond fission in IM3 leading to the major product CH₂S + HNO. Due to high barriers, other product including HC(N)SH + HO, HON + CH₂S, and HNO + CHSH could be negligible. The direct abstraction channel was also determined to yield CH₂S + HON. With high barrier (33.3 kcal/mol), it is not competitive with the addition channel, in which all stationary points are lower than reactant energetically. While on the triplet PES, with the lowest barrier height (18.8 kcal/mol), the direct N-abstracted channel to form CH₂S + HNO is dominant. However, it is not competitive with the channels on the singlet PES. Our results are in good accordance with experimental conclusions that the reaction proceeds via addition mechanism.     

Molecular Photoacoustic Tomography with Colloidal Nanobeacons

Spotting clots : Vascularly constrained colloidal gold nanobeacons (GNBs; see picture) can be used as exogenous photoacoustic contrast agents for the targeted detection of fibrin, a major biochemical feature of thrombus. Fibrin‐targeted GNBs provide a more than tenfold signal enhancement in photoacoustic tomography in the near‐IR wavelength window, indicating their potential for diagnostic imaging.

     

Two‐Way Molecular Switches with Large Nonlinear Optical Contrast

Molecular switches : Highly efficient acido‐ and photoswitchable frequency doublers (see scheme) based on the indolinooxazolidine core are studied by means of hyper‐Rayleigh experiments and quantum‐chemical calculations.

     

Synthesis,Structures, and Properties of Two Novel Supramolecular Architectures Constructed from [2,3‐f]Pyrazino[1,10]phenanthroline‐2,3‐dicarboxylic Acid

Two new compounds, [Ag(Hppdb)]_n ( 1 ) and {[Ag₂(Hppdb)₂(bpe)] · 5.5H₂O}_n( 2 ) [H₂ppdb = [2,3‐f]pyrazino[1,10]phenanthroline‐2,3‐dicarboxylic acid, bpe = trans‐1,2‐bis(4‐pyridyl)ethylene], were synthesized and characterized. In 1 , Hppdb^– ions link Ag^I cations to form an infinite 1D [–Ag–(Hppdb)–Ag–]_n chain, furthermore, the dimensionality is extended to 2D layers through synergistic π–π stacking, hydrogen‐bonding and weak Ag ··· O interactions. Correspondingly, the dimeric [(Ag)(Hppdb)]₂ subunits in 2 are connected by bpe ligands to generate a loop‐link‐shaped 1D chain motif, which is further joined through a R₂²(18)C–H ··· O hydrogen‐bonding ring to afford interesting diagonal/diagonal inclined catenation 2D + 2D → 3D supramolecular architectures. In addition, solid‐state properties such as photoluminescence and thermal stability of the two compounds were studied.     

Consideration of molecular weight during compound selection in virtual target-based database screening

Virtual database screening allows for millions of chemical compounds to be computationally selected based on structural complimentary to known inhibitors or to a target binding site on a biological macromolecule. Compound selection in virtual database screening when targeting a biological macromolecule is typically based on the interaction energy between the chemical compound and the target macromolecule. In the present study it is shown that this approach is biased toward the selection of high molecular weight compounds due to the contribution of the compound size to the energy score. To account for molecular weight during energy based screening, we propose normalization strategies based on the total number of heavy atoms in the chemical compounds being screened. This approach is computationally efficient and produces molecular weight distributions of selected compounds that can be selected to be (1) lower than that of the original database used in the virtual screening, which may be desirable for selection of leadlike compounds or (2) similar to that of the original database, which may be desirable for the selection of drug-like compounds. By eliminating the bias in target-based database screening toward higher molecular weight compounds it is anticipated that the proposed procedure will enhance the success rate of computer-aided drug design.     

Chiral Lewis acid-catalyzed asymmetric Baylis-Hillman reactions

An effective chiral Lewis acid-catalyzed asymmetric Baylis-Hillman reaction is described. Good to high enantioselectivities were obtained using 3 mol % chiral catalyst. Novel camphor-derived dimerized ligands were prepared from the condensation of (+)-ketopinic acid with the corresponding diamines and hydrazine under acidic conditions. When alpha-naphthyl acrylate was used as a Michael acceptor, the reaction is complete within 20 min with high stereoselectivity and in reasonable chemical yields.     

Spectra and structure of silicon containing compounds. XXXII. Raman and infrared spectra,conformational stability,vibrational assignment and ab initio calculations of n-propylsilane-d0 and Si-d3

The infrared (3100-40 cm(-1)) and Raman (3100-20 cm(-1)) spectra of gaseous and solid n-propylsilane, CH(3)CH(2)CH(2)SiH(3) and the Si-d(3) isotopomer, CH(3)CH(2)CH(2)SiD(3), have been recorded. Additionally, the Raman spectra of the liquids have been recorded and qualitative depolarization values obtained. Both the anti and gauche conformers have been identified in the fluid phases but only the anti conformer remains in the solid. Variable temperature (-105 to -150 degrees C) studies of the infrared spectra of n-propylsilane dissolved in liquid krypton have been recorded and the enthalpy difference has been determined to be 220+/-22 cm(-1) (2.63+/-0.26 kJ mol(-1)) with the anti conformer the more stable form. A similar value of 234+/-23 cm(-1) (2.80+/-0.28 kJ mol(-1)) was obtained for deltaH for the Si-d(3) isotopomer. At ambient temperature it is estimated that there is 30+/-2% of the gauche conformer present. The potential function governing the conformation interchange has been estimated from the far infrared spectral data, the enthalpy difference, and the dihedral angle of the gauche conformer, which is compared to the one predicted from ab initio MP2/6-31G(d) calculations. The barriers to conformational interchange are: 942, 970 and 716 cm(-1) for the anti to gauche, gauche to gauche, and gauche to anti conformers, respectively. Relatively complete vibrational assignments are proposed for both the n-propylsilane-d(0) and Si-d(3) molecules based on the relative infrared and Raman spectral intensities, infrared band contours, depolarization ratios, and normal coordinate calculations. The geometrical parameters, harmonic force constants, vibrational frequencies, infrared intensities, Raman activities and depolarization ratios, and energy differences have been obtained for the anti and gauche conformers from ab initio MP2/6-31G(d) calculations. Structural parameters and energy differences have also been obtained utilizing the larger 6-311 + G(d,p) and 6-311 + G(2d,2p) basis sets. From the isolated Si-H stretching frequency from the Si-d(2) isotopomer the r(0) distances of 1.484 and 1.485 A have been determined for the SiH(s) and SiH(a) bonds, respectively, for the anti conformer, and 1.486 A for the SiH bond for the gauche conformer. Utilizing previously reported microwave rotational constants for the anti conformer and the determined SiH distances along with ab initio predicted parameters 'adjusted r(0)' parameters have been obtained for the anti conformer. The results are discussed and compared to those obtained for some similar molecules.     

基于遗传算法的PTP1B抑制剂的二维定量构效关系研究

利用遗传算法,并结合线性回归和交叉验证方法,对一系列43个苯并呋喃/噻吩联二苯类PTP1B抑制剂作了二维定量构效关系的研究.计算得到了一组效果较好的定量构效关系模型.模型不仅具有好的回归能力,而且还具有很好的预测能力.同时,通过分析在遗传优化过程中参数在精华种群中所占的比例,还得到了可能对活性影响较大的成分.计算结果表明,分子的4个参数:lgP(分配系数)、Area（表面积）、MW（分子量）以及Dip（偶极距）是影响化合物活性的最重要的参数,这对抑制剂的设计和改造提供了指导.     

Synthesis and evaluation of a C8 stationary phase on a silica hydride surface by hydrosilation of 1-octyne

The silanization/hydrosilation method is used to bond an alkyne (1-octyne) to a silica hydride surface. The new bonded material is characterized by elemental analysis and diffuse reflectance infrared Fourier transform spectroscopy. The hydrophobic behavior of this material was determined by the retention characteristics of aromatic solutes and the shape selectivity as well as phase classification (monomeric or polymeric) was measured by the polycyclic aromatic hydrocarbon mixture standard reference material 869. The presence of residual silanols on the bonded phase was probed by several basic solutes at pH 7. Long-term stability studies were conducted by measuring retention and peak symmetry of basic compounds over several thousand column volumes at pH 10.