人γ晶体蛋白的一级结构测定 1.γ晶体蛋白的分离提纯及其顺序测定方法(GC/MS法)的研究

成功地从人眼晶体中分离出单纯组分的γ晶体蛋白,对γ晶体蛋白的纯度、相对分子质量、氨基酸组成、N末端氨基酸组成等进行了测定,利用酸水解法和酶解法对γ晶体蛋白进行了水解和酶解条件的摸索、找出了使γ晶体蛋白断裂成适合于GC/MS联用仪进行结构测定的肽段的裂解条件。对进行氨基酸顺序测定的GC/MS法化学衍生化条件作了一系列的摸索,找出了化学衍生化的合适条件。对衍生化过程中的一些影响因素也进行了探讨。     

PBT／PC共混体系流变性能与形态结构研究

采用毛细管流交仪测定了ＰＢＴ／ＰＣ共混物的表观粘度、剪切应力，观察了不同共混物组成和不同温度下共混物的流变行为，并借助扫描电镜对共混物和微观形态结构进行分析。结果表明：ＰＢＴ／ＰＣ熔体共混物的流变行为接近假塑性流体．温度对共混物的流变行为影响很大，共混物的熔体粘度在ＰＢＴ／ＰＣ为９０／１０和６０／４０时呈双极值．共混物为两相结构，ＰＣ含量为４－５０％时呈两互锁结构。     

丙烯腈水相沉淀聚合研究进展

结合近几年的研究成果,笔者对丙烯腈水相沉淀聚合机理、聚合动力学、动力学数学模型诸方面问题进行了系统的综述,反映了该领域的研究概况和最新研究成果.     

Morphology and thermal properties of a PC/PE blend with reactive compatibilization

Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC‐graft‐ethylene‐co‐acrylic acid (PC‐graft‐EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene‐acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC‐graft‐EAA. Copyright © 2007 John Wiley & Sons, Ltd.     

Solid-state synthesis of a conducting polythiophene via an unprecedented heterocyclic coupling reaction

Prolonged storage ( approximately 2 years) or gentle heating (50-80 degrees C) of crystalline 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) affords a highly conducting, bromine-doped poly(3,4-ethylenedioxythiophene) (PEDOT), as confirmed by solid-state NMR, FTIR, CV, and vis-NIR spectroscopies. The novel solid-state polymerization (SSP) does not occur for 2,5-dichloro-3,4-ethylenedioxythiophene (DCEDOT), and requires a much higher temperature (>130 degrees C) for 2,5-diiodo-3,4-ethylenedioxythiophene (DIEDOT). X-ray structural analysis of the above dihalothiophenes reveals short Hal.Hal distances between adjacent molecules in DBEDOT and DIEDOT, but not in DCEDOT. The polymerization may also occur in the melt but is significantly slower and leads to poorly conductive material. Detailed studies of the reaction were performed using ESR, DSC, microscopy, and gravimetric analyses. SSP starts on crystal defect sites; it is exothermic by 14 kcal/mol and requires activation energy of approximately 26 kcal/mol (for DBEDOT). The temperature dependence of the conductivity of SSP-PEDOT (sigma(rt) = 20-80 S/cm) reveals a slight thermal activation. It can be further increased by a factor of 2 by doping with iodine. Using this approach, thin films of PEDOT with conductivity as high as 20 S/cm were fabricated on insulating flexible plastic surfaces.     

动态法测定耐硫甲烷化催化剂的有效导热系数

本文采用动态法原理，用单丝直径为０．２ｍｍ的铜－录铜热偶作为测温元件，在３１３－５３３Ｋ温度区间，测定了耐硫甲烷化催化剂的有地热系数。用石蜡和锡作为参比物，对所用仪器及实验方法进行了可靠性检验。实验表明，动态法是测定多孔硫化物催化剂导热系数的有效方法。其精度符合工程要求，亦能用于其它材料导热系数的测定。对所测数据用单纯形方法优化拟合，得到大于３５３Ｋ范围内的有效导热系数的经验公式。     

Enzymatic reaction of the immobilized enzyme on porous silicon studied by matrix-assisted laser desorption/ionization-time of flight-mass spectrometry

Desorption/ionization on silicon mass spectrometry (DIOS-MS) is a matrix-free technique that allows for the direct desorption/ionization of low-molecular-weight compounds with little or no fragmentation of analytes. This technique has a relatively high tolerance for contaminants commonly found in biological samples. DIOS-MS has been applied to determine the activity of immobilized enzymes on the porous silicon surface. Enzyme activities were also monitored with the addition of a competitive inhibitor in the substrate solution. It is demonstrated that this method can be applied to the screening of enzyme inhibitors. Furthermore, a method for peptide mapping analysis by in situ digestion of proteins on the porous silicon surface modified by trypsin, combined with matrix-assisted laser desorption/ionization-time of flight-MS has been developed.     

4-乙烯基吡啶-镍(钴)及丙烯酰胺-镍(钴)的制备、结构、聚合及聚合物的催化性能

制备了4-乙烯基吡啶-镍(钴)和丙烯酰胺-镍(钴)络合物并研究了它们的结构。在自由基引发剂的作用下,4-乙烯基吡啶-镍可进行溶液聚合,也可与苯乙烯共聚合,测定了单体的竞聚率。所得的聚(4-乙烯基吡啶-镍)及聚(4-乙烯基吡啶-钴)以NaBH_4还原后可作为一些有机化合物的加氢催化剂。由IR及XPS分析说明在丙烯酰胺-镍络合物中,与镍离子发生了络合作用的是羧基上的氧原子。     

铈、镨二乙基磷酸盐的晶体结构

合成了Ce[PO_2(OC_2H_5)_2]_3和Pr[PO_2(OC_2H_5)_2]_3(简称Ce(DEP)_3和Pr(Pr(DEP)_3)。用四圆衍射仪测定了其晶体结构。它们均属三斜晶系,空间群P1。晶胞参数,对Ce(DEP)_3:α=10.324(4)A,b=12.861(4)A,c=13.998(5)A,x=106.49(3)°,β=112.83(4)° γ=115.61(3)°,V=1296(1)A~3,Z=2;对Pr(DEP)_3:α=10.27(1)A,b=11.81(1)A,c=12.51(1)A,x=109.93(9)°,β=111.9(9)°,γ=93.0(1)°,V=1293(3)A~3,Z=2。用Patterson法并经分块全矩阵最小二乘法修正,最后的R值,Ce的为0.1071,Pr的为0.1066。结构分析指出,两种配合物结构类似,Ce和Pr原子均由二乙基磷酸根的六个氧原子配位形成八面体构型。     

小波变换用于高效液相色谱的基线校正

本文根据小波变换将信号分频的性质，用Ｄａｕｂｅｃｈｉｅｓ小波成功地解决了高效液相色谱中基线校正问题，用于定量分析乳酸－稀土络合物体系中的十六个稀土元素，所得结果与仪器给出了结果进行比较，准确度提高，重现性良好。