Increase of refractive index induced by absorbing centres

An analytical expression of the complex permittivity is derived for absorbing centres featuring inhomogeneous absorption-line broadening. Such an expression gives the dispersion law of the real part of the permittivity when the imaginary part has a Gaussian lineshape. Our mathematical approach starts from an overlap integral of Lorentzian-type dielectric susceptibilities weighted by a Gaussian probability distribution of the resonance absorption energies. The analytical solution found is consistent with the Kramers–Kronig relation. We demonstrate that, like in the case of homogeneous absorption-line broadening, the refractive index increases at photon energies lower than the resonance absorption energy also for inhomogeneous absorption-line broadening; if the absorbing centres emit Stokes-shifted radiation, such an increase can be exploited for passive and active waveguiding applications. An example is reported regarding active waveguides based on colour centres in a lithium fluoride crystal.     

FexNi100−x nanometric films deposited by laser ablation on SiO2/Si substrates

Fe_xNi_100−x nanometric films were deposited on SiO₂/Si substrates at room temperature using the pulsed laser deposition technique. The targets were Fe-Ni amorphous magnetic foils with composition Fe₅₀Ni₅₀, Fe₃₅Ni₆₅ and Fe₂₂Ni₇₈. Morphological and structural properties of the deposited films were investigated using scanning electron microscopy, Rutherford backscattering spectrometry, grazing incidence X-ray diffraction, and X-ray reflectivity. Electrical and magnetic characteristics of the films were investigated by using the four-point probe and the magneto-optic Kerr effect techniques, respectively. The film properties are strictly dependent on the Fe-Ni compositional ratio.     

Thickness dependence of free‐standing thin films

Below a critical thickness, of about 60 nm, the glass transition temperature of polystyrene (PS) films decreases with film thickness, as demonstrated using free‐standing films. A geometrical model is developed here describing this phenomenon in the case of ideal (Gaussian) chains. This model, which can be considered as an application of the free volume model, assumes that the decrease of the glass transition temperature from thick to ultrathin films is due to the modification of the interpenetration between neighboring chains. The theoretical curve deduced from the model is in excellent agreement with the PS experimental results, without using any adjustable parameters. From these results, it can be concluded that new chain motions, usually buried in bulk samples, are expressed by the presence of the surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 10–17, 2007     

Fluorine incorporation in silica glass by the MCVD process: Study of fluorine incorporation zone,evaluation of optical properties and structure of the glass

A theoretical approach was made to find out a complete fluorine incorporation zone on a ternary diagram which serves as a useful graphical representation to select the flows of the supplied reagents for incorporation of the suitable amount of fluorine into cladding glass of optical fiber preform made by the MCVD process using CCl₂F₂ as a source of fluorine under oxygen abundance, oxygen deficiency and intermediate oxygen state conditions. The possible mechanism for incorporation of fluorine into cladding glass of optical fiber is also evaluated on the basis of the thermodynamical data. The fluorine incorporation mechanism in silica glass by the MCVD process is found to be dependent on the CCl₂F₂/SiCl₄ ratio in the input gas mixture. Fluorine doping is found to be effective for removing the strained Si–O–Si bonds, which govern the optical transparency in deep ultra-violet (DUV) and vacuum ultra-violet (VUV) regions. The maximum refractive index depression of ?0.5 × 10^?3 is obtained with incorporation of fluorine into silica cladding glass by the MCVD process using CCl₂F₂ as a dopant precursor with suitable flow of SiCl₄ vapor along with O₂ through backward deposition pass. The structure of fluorine doped silica glass preform samples containing 1.70–1.79 mol% fluorine incorporated by the MCVD process based on the analyses of ¹⁹F MAS spectra done by high-resolution ¹⁹F NMR spectroscopy reveal the presence of two distinct types of fluorine environments. The majority of the fluorine environments are formed in SiO_1.5F polyhedral and less abundant species is observed to be highly unusual, yielding a fivefold coordinated silicon of the type SiO₂F polyhedral which become increased with increasing the fluorine content.     

Circular dichroism spectra of langasite family crystals in the range of electronic transitions of structure defects

The absorption and circular dichroism spectra of langasite family crystals are studied. Wide bands in the range of 285–500 nm that are related to the structure lattice defects are found. For all the crystals, these bands are in approximately the same spectral region, have identical structures, and can be attributed to one type of defects formed by cation vacancies and excess oxygen atoms in the optically active positions.     

Specific features of the formation of submicron inclusion in Ti:sapphire

Specific features of the formation of submicron (70–300 nm) inclusions in Ti:sapphire (Al₂O₃:Ti) grown in a carbon-containing medium have been investigated. These inclusions are caused by deviation from the melt stoichiometry and are formed during the melt-crystal phase transition. These defects are submicropores containing excess aluminum and its suboxides; they can be destroyed by thermal loading of a crystal.     

A semi-analytic meshfree method for Almansi–Michell problems of piezoelectric cylinders

Saint-Venant’s Problem, Almansi–Michell Problems, Meshfree Methods, Piezoelectricity. We present a semi-analytical method for analyzing prismatic nonhomogeneous piezoelectric cylinders with arbitrary cross-sectional geometry. The prescribed loads considered in this study include axial forces, torques, moments, and voltage resultants prescribed at the cylinder’s ends, as well as body forces, lateral surface shears, voltages, and pressures as long as they can be represented by a power series in the axial coordinate. This problem can be considered as an extension of Saint-Venant and Almansi–Michell problems for elastic bodies to piezoelectric bodies. In this computationally efficient method, the cross-sectional plane is discretized with a meshfree approach, and the solution is obtained analytically with respect to the axial coordinate. A number of examples are provided to demonstrate the veracity and utility of the proposed method.     

Identification of nonstationary axisymmetric load distributed along a cylindrical shell

The paper outlines a procedure to identify the space-and time-dependent external nonstationary load acting on a closed circular cylindrical shell of medium thickness. Time-dependent deflections at several points of the shell are used as input data to solve the inverse problem. Examples of numerical identification of various nonstationary loads, including moving ones are presented. The relationship between the external load and the stress-strain state of the shell is described by the Volterra equation of the first kind. The identification problem is solved using Tikhonov's regularization method and Apartsin's h-regularization method __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 7, pp. 91–100, July 2008.     

Thermal degradation of composites of poly(methyl methacrylate) with alkoxysilane hydrolyzates

Organic-inorganic composites of poly(methyl methacrylate) with alkoxysilane hydrolyzates form transparent films. Their thermal and oxidative thermal degradation were studied by differential scanning calorimetry and thermogravimetric analysis.