Ionenaustauschchromatographie mit gepackten Capillars?ulen und amperometrischer Detektion

Zusammenfassung Herstellung und Anwendung gepackter Capillarsäulen (innerer Durchmesser: 0,3 mm) zur analytischen Trennung von Kationen durch Komplexelution im Mikromaßstab werden beschrieben. Als Säulenpackung dienen Kugeln eines stark sauren Kationenaustauschers mit einem mittleren Durchmesser von 25 . Die Detektion der getrennten Kationen erfolgt kontinuierlich im Effluent mit Hilfe einer amperometrischen Mikromeßzelle. Die Trennleistung einer 125 mm langen Capillarsäule wird am System Ni²⁺/Co²⁺/Iminodiessigsäure gezeigt. Die dosierten Probemengen liegen in der Größenordnung von 5–12 g je Kation.

---

Summary Preparation and application of packed capillary columns (interior diameter: 0.3 mm) for analytical separations of cations in micro-scale by means of complex elution are described. The capillary columns are filled with spherical grains in the range of 25 .The detection of separated cations in the effluent is performed by means of an amperometric micro-cell.The separation efficiency of a capillary column (length: 125 mm) is shown for the system Ni²⁺/Co²⁺/iminodiacetic acid. The injected quantities of samples are in the range of 5–12 g per cation.

---

---

Herrn Dr. habil. K. Wetzel danken wir für Anregungen und Diskussionen, den Herren W. Rose und K. Rupprecht für praktische Unterstützung bei der vorliegenden Arbeit.     

Synthetic analogues of wedelolactone

The syntheses of 7′-methoxy- and 5′,7′,6-trimethoxy-coumarino(3′,4′:3,2)coumarones (IIa and IIb) are described.     

Spectral study of the conversion of porphyrins during interaction with molecular negative ions

In the interaction of ethioporphyrin and of several of its metal derivatives with negative ions of pyridine and anthracene in tetrahydrofuran solutions, an electron transfer takes place which results in the conversion of the pyridine and anthracene ions into neutral molecules, whereas the molecules of the pigment are first transformed into monovalent anions and subsequently into the di-, tri-, tetra-, and sometimes even into the hexavalent anions. In the first stage of this interaction, ferriethioporphyrin is reduced to ferro-ethioporphyrin, whereas the unmetallized pigment and its copper complex are transformed into the disodium derivative of ethioporphyrin. When the temperature is lowered, the rate of the electron transfer from pyridine ions to zinc-ethioporphyrin is decreased, and illumination leads to a substantial rate increase. The photochemical sensitivity of this system is possibly linked to the formation of stable complexes between pigment molecules and pyridine ions.     

Metal coordination polymers. II. Molecular weight studies of beryllium phosphinate polymers in toluene

The number-average molecular weights of beryllium 4-biphenyl(phenyl)phosphinate, di-n-pentylphosphinate, di-n-heptylphosphinate, and trifluoromethyl(phenyl)phosphinate are degraded by the presence of water in toluene. It is proposed that easily hydrolyzable P? O? P bonds contribute, in part, to the bonding of these polymers.     

Electrode Processes in a Eutectic KCl–KF Melt Containing Gadolinium Oxide

The electroreduction of gadolinium from a eutectic KCl–KF melt containing 0.210–1.233 wt % Gd₂O₃ on molybdenum and glassy carbon electrodes is studied at 1008 K. The solubility of gadolinium oxide is determined. It is shown that the reduction of a gadolinium oxyfluoride complex proceeds reversibly, with a subsequent reversible chemical reaction. The gadolinium reduction on an iron electrode in a eutectic KCl–KF melt purified of unwanted oxide ion impurities yields an iron-gadolinium alloy.     

Electroviscous Effect in Dilute Suspensions of Alumina

A study on the electroviscous effect of alumina suspensions has been made. At the low volume fraction of the particles studied here only a first-order effect was detected. Ubbelohde-type capillary viscometers have been used. A simple method to determine the hydrodynamic constant k(1) has been proposed. The experimental primary electroviscous coefficients corresponding to different electrolyte concentrations have been compared with two different theoretical approachs (I. G. Watterson, and L. R. White, J. Chem. Soc. Faraday Trans. 2 77, 1115 (1981); F. J. Rubio-Hernández, E. Ruiz-Reina, and A. I. Gómez-Merino, J. Colloid Interface Sci. 206, 334 (1998)) and the results suggest that the presence of a dynamic Stern layer plays a certain role in this effect. Copyright 2000 Academic Press.     

Studies on the determination of diacetyl guanfubase A concentration in rabbit plasma and pharmacokinetics

A gas chromatographic method for monitoring diacetyl guanfubase A in plasma is described. The procedure involved a single solvent extraction of drug from rabbit plasma into ethyl acetate with guanfubase A as an internal standard. The extract was analyzed subsequently on a gas chromatograph equipped with a hydrogen flame ionization detector. The recovery was 86.43% +/- 6.90% (+/- SD); the RSD of within-day and between-day was 2.81%-5.26% and 5.22%-8.24%, respectively; the regression line was linear over the concentration range of 25-200 micrograms/mL, the limit of detection was 10 micrograms/mL. No endogeneous interference was found in chromatograms of the biological samples. This method was applied to the pharmacokinetic study of diacetyl guanfubase A in rabbits.     

Evaluation of a complete HPLC solvent optimization system involving piece-wise quadratic modelling

Summary Interpretive methods are accepted to give the best possible results for selectivity optimization in HPLC. However the methods are very complex, and most work so far has been detailed academic studies. This paper describes an evaluation of a complete integrated system incorporating peak labelling, modelling of retention behaviour and calculation of response surfaces, with particular emphasis on the retention modelling. The peak labelling section has been discussed previously.A piece-wise quadratic function is investigated for the modelling of retention times across an isoeluotropic plane to effect selectivity optimization in HPLC. This requires 10 data-points on the isoeluotropic plane. The predicted global optimum and local optima are evaluated by comparison of calculated and experimental retention data, for a nine component sample. Seven interstitial points, distributed across the whole plane between the data-points, are similarly evaluated for a related sample. The typical error (in retention time) is less than 2%, often 1%, and the maximum error is 4.2%. At the global optimum the error was found be less than 1.3% for all 9 peaks.     

Determination of lead by selective chelatometric titration with HEDTA after separation as its sulphate by an improved method of precipitation

A selective titrimetric determination of Pb after separation by a modified method of precipitation as its sulphate is proposed. Pb(II), present as the perchlorate, is precipitated by gentle boiling in 3.6M H(2)SO(4) presaturated with PbSO(4) and free from any extraneous anions. The customary time-consuming evaporation to fumes of sulphuric acid is dispensed with. The precipitate is collected, and dissolved in excess of HEDTA, the surplus of which is back-titrated with Zn(II) at pH 5.0-5.5. Use of Catechol Violet and Xylenol Orange as a mixed indicator gives a sharper end-point. The standard deviation of the proposed method for 60 mg of lead is 0.35 mg. The method has been successfully used to determine Pb in non-ferrous alloys.