Simultaneous determination of mono-, di- and tributyltin in environmental samples using isotope dilution gas chromatography mass spectrometry

The development of a rapid, precise and accurate speciation method for the simultaneous determination of mono-, di- and tributyltin in environmental samples is described. The method is based on using isotope dilution gas chromatography/mass spectrometry (GC/MS) with electron ionization, a widely used technique in routine testing laboratories. A mixed spike containing (119)Sn-enriched monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) was used for the isotope dilution of the samples. Five molecular ions were monitored for each analyte, corresponding to the (116)Sn, (117)Sn, (118)Sn, (119)Sn and (120)Sn isotopes. The detection at masses corresponding to (116)Sn and (117)Sn were used to correct for m + 1 and m + 2 contributions of (13)C from the organic groups attached to the tin atom on the (118)Sn, (119)Sn and (120)Sn masses with simple mathematical equations and the concentrations of the butyltin compounds were calculated based on the corrected (118)Sn/(119)Sn and (120)Sn/(119)Sn isotope ratios. The (119)Sn-enriched multispecies spike was applied with satisfactory results to the simultaneous determination of MBT, DBT and TBT in three certified reference materials: two sediments, PACS-2 and BCR 646, and the mussel tissue CRM 477. The method was compared with a previously published GC/inductively coupled plasma MS isotope dilution procedure, developed in our laboratory, by injecting the same samples into both instruments. Comparable analytical results in terms of precision and accuracy are demonstrated for both atomic and molecular mass spectrometric detectors. Thus, reliable quantitative organotin speciation analysis can be achieved using the more widespread and inexpensive GC/MS instrument.     

Theoretical characterization of the low-lying electronic states of NbC

We have studied the potential-energy curves and the spectroscopic constants of the ground and low-lying excited states of NbC by employing the complete active space self-consistent field method with relativistic effective core potentials followed by multireference configuration-interaction calculations. We have identified 23 low-lying electronic states of NbC with different spin multiplicities and spatial symmetries within 40,000 cm(-1). At the multireference single and double configuration interaction level of theory the 2sigma+ and 2delta states are nearly degenerated, with the 2delta state located 187 cm(-1) lower than the 2sigma+ state. The estimated spin-orbit splitting for the 2delta state results in a 2delta(3/2) ground state and A 2sigma+ which is placed 650 cm(-1) above the ground state, in reasonable agreement with the experimental result, 831 cm(-1). Our computed spectroscopic constants are in good agreement with experimental values although our results differ from those of a previous density-functional investigation of the excited states of NbC, mainly due to the strong multiconfigurational character of NbC. In the present work we have not only suggested assignments for the observed states but also computed more electronic states that are yet to be observed experimentally.     

Flow injection determination of selenium by successive retention of Se(IV) and tetrahydroborate(III) on an anion-exchange resin and hydride generation electrothermal atomization atomic absorption spectrometry with in-atomizer trapping: Part 1. Method development and investigation of interferences

A sample solution was passed at 20 ml min⁻¹ through a column (150×4 mm²) of Amberlite IRA-410Stron anion-exchange resin for 60 s. After washing, a solution of 0.1% sodium borohydride was passed through the column for 60 s at 5.1 ml min⁻¹. Following a second wash, a solution of 8 mol l⁻¹ hydrochloric acid was passed at 5.1 ml min⁻¹ for 45 s. The hydrogen selenide was stripped from the eluent solution by the addition of an argon flow at 150 ml min⁻¹ and the bulk phases were separated by a glass gas–liquid separator containing glass beads. The gas stream was dried by passing through a Nafion® dryer and fed, via a quartz capillary tube, into the dosing hole of a transversely heated graphite cuvette containing an integrated L’vov platform which had been pretreated with 120 μg of iridium as trapping agent. The furnace was held at a temperature of 250°C during this trapping stage and then stepped to 2000°C for atomization. The calibration was performed with aqueous standards solution of selenium (selenite, SeO₃²⁻) with quantification by peak area. A number of experimental parameters, including reagent flow rates and composition., nature of the gas–liquid separator, nature of the anion-exchange resin, column dimensions, argon flow rate and sample pH, were optimized. The effects of a number of possible interferents, both anionic and cationic were studies for a solution of 500 ng 1⁻¹ of selenium. The most severe depressions were caused by iron (III) and mercury (II) for which concentrations of 20 and 10 mg  1⁻¹ caused a 5% depression on the selenium signal. For the other cations (cadmium, cobalt, copper, lead,. magnesium, and nickel) concentrations of 50–70 mg 1⁻¹ could be tolerated. Arsenate interfered at a concentration of 3 mg⁻¹, whereas concentrations of chloride, bromide, iodide, perchlorate, and sulfate of 500–900 mg l⁻¹ could be tolerated. A linear response was obtained between the detection limit of 4 ng 1⁻¹, with a characteristic mass of 130 pg. The RSDs for solutions containing 100 and 200 ng 1⁻¹ selenium were 2.3% and 1.5%, respectively.     

Mechanism and kinetics of ordering in diblock copolymer thin films on chemically nanopatterned substrates

Lamellae forming diblock copolymer domains can be directed to assemble without defects and in registration with chemically nanopatterned substrates. Initially, thin films of the lamellar poly(styrene-b-methyl methacrylate) block copolymer form hexagonally close-packed styrene domains when annealed on chemical nanopatterned striped surfaces. These styrene domains then coalesce to form linear styrene domains that are not fully registered with the underlying chemical surface pattern. Defects coarsen, until defect-free directed assembly is obtained, by breaking linear styrene domains and reforming new structures until registered lamellae have been formed. At all stages in the process, two factors play an important role in the observed degree of registration of the block copolymer domains as a function of annealing time: the interfacial energy between the blocks of the copolymer and the chemically nanopatterned substrate and the commensurability of the bulk repeat period of the block copolymer and the substrate pattern period. Insight into the time-dependent three-dimensional behavior of the block copolymer structures is gained from single chain in mean field simulations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3444–3459, 2005     

Aryl palladium carbene complexes and carbene-aryl coupling reactions

Transmetalation of an aminocarbene moiety from [W(CO)5{C(NEt2)R}] to palladium leads to isolable monoaminocarbene palladium aryl complexes [{Pd(mu-Br)Pf[C(NEt2)R]}2] (R = Me, Ph; Pf = C6F5). When [W(CO)5{C(OMe)R}] is used, the corresponding palladium carbenes cannot be isolated since these putative, more electrophilic carbenes undergo a fast migratory insertion process to give alkyl palladium complexes. These complexes could be stabilized in the eta3-allylic form for R = 2-phenylethenyl or in the less stable eta3-benzylic fashion for R = Ph. Hydrolysis products and a pentafluorophenylvinylic methyl ether (when R = Me) were also observed. The monoaminocarbenes slowly decompose through carbene-aryl coupling to produce the corresponding iminium salts and, depending on the reaction conditions, the corresponding hydrolysis products. The electrophilicity of the carbene carbon, which is mainly determined by the nature of the heteroatom group, controls the ease of evolution by carbene-aryl coupling. Accordingly, no carbene-aryl coupling was observed for a diaminocarbene palladium aryl complex.     

Experimental study of the interplay between long-range electron transfer and redox probe permeation at self-assembled monolayers: evidence for potential-induced ion gating

Evidence for the competition between long-range electron transfer across self-assembled monolayers (SAMs) and incorporation of the redox probe into the film is reported for the electroreduction of Ru(NH(3)) at hydroxyl- and carboxylic-acid-terminated SAMs on a mercury electrode, by using electrochemical techniques that operate at distinct time scales. Two limiting voltammetric behaviors are observed, consistent with a diffusion control of the redox process at mercaptophenol-coated electrodes and a kinetically controlled electron transfer reaction in the presence of neutral HS-(CH(2))(10)-COOH and HS-(CH(2))(n)()-CH(2)OH (n = 3, 5, and 10) SAMs. The monolayer thickness dependence of the standard heterogeneous electron transfer rate constant shows that the electron transfer plane for the reduction of Ru(NH(3)) at hydroxyl-terminated SAMs is located outside the film | solution interface at short times. However, long time scale experiments provide evidence for the occurrence of potential-induced gating of the adsorbed structure in some of the monolayers studied, which takes the form of a chronoamperometric spike. Redox probe permeation is shown to be a kinetically slow process, whose activation strongly depends on redox probe concentration, applied potential, and chemical composition of the intervening medium. The obtained results reveal that self-assembled monolayers made of mercaptobutanol and mercaptophenol preserve their electronic barrier properties up to the reductive desorption potential of a fully grown SAM, whereas those of mercaptohexanol, mercaptoundecanol, and mercaptoundecanoic acid undergo an order/disorder transition below a critical potential, which facilitates the approach of the redox probe toward the electrode surface.     

The interactions of surfactant viologens with cyclodextrins

N-ethyl-N-hexadecyl-4,4-bipyridinium bromide (C₁₆VBr₂) andN-ethyl-N-octadecyl-4,4-bipyridinium bromide (C₁₈VBr₂) were used as electroactive probes to assess the interactions between surfactants and cyclodextrins. Cyclic voltammetry, visible spectroscopy, fluorescence spectroscopy and surface tension techniques were used to detect the formation of complexes between the surfactant viologen probes and- and-cyclodextrins. The voltammetric results suggest the formation of inclusion compounds in which the hydrophobic tail of the surfactant viologens penetrate the cyclodextrin cavity. The dimerization of the viologen cation radicals is essentially suppressed by the presence of-cyclodextrin (ACD) while no effects are observed in the presence of-cyclodextrin (BCD). The observed results are best explained by the relative solubility in aqueous media of each of the inclusion complexes in the several accessible viologen oxidation states.     

On-line electrochemical preconcentration and flame atomic absorption spectrometric determination of manganese in urine samples

A sensitive and selective method was developed for the determination of traces of manganese in urine using on-line electrochemical preconcentration followed by flame atomic absorption spectrometry detection. A home made flow-through polypropylene cell (4.5 cm long × 0.8 cm diameter filled with glass marbles) with an effective inner volume of 0.5 ml containing a working and a counter electrode, both of glassy carbon and a Pt pseudo reference electrode was located in a flow injection manifold specially designed for the purpose of this work. The manganese was deposited from buffer solution of NH₃/NH₄Cl at pH 9.00 through an oxidizing process at a current of 400 mA during 7 min. A flow of HCl 0.1 mol l⁻¹ at 4 ml min⁻¹ through the cell, chemically dissolved the deposit. A small portion (15 μl) of the concentrate was introduced in a continuously flowing system by means of a timing device and was then carried to the detector for the manganese quantification. All electrochemical and spectroscopic variables as well as possible interferences in both systems were systematically studied. The relative standard deviations for ten consecutive measurements of manganese solutions of 2.0 and 20 μg l⁻¹ were of 2.3 and 1.5%, respectively, while for a sample processed five times was less then 5%. The accuracy of the developed procedure was evaluated by adding known amounts of manganese standard to urine samples and following the whole procedure. Recoveries within the range 97.2-102.8% were obtained. To further prove the accuracy, a Seronorm Trace Elements in Urine, Batch 403125 sample with a reported concentration of 13 μg Mn l⁻¹ was also analyzed. The experimental value obtained was of 12.7 ± 0.1 μg l⁻¹, which does not differ significantly from the reported amount (p < 0.05). A preconcentration factor of 40, a linear range between 0.015 and 60 μg l⁻¹ and a limit of detection of 15 ng l⁻¹ permitted the determination of manganese in real urine samples from non-exposed subjects in the range 0.5-2.8 μg l⁻¹.     

Thiolate ligands for synthesis of water-soluble gold clusters

Water-soluble monolayer-protected gold clusters (MPCs) have been an object of investigation by many research groups since their first syntheses were reported in 1998 and 1999. The basic requirements for a ligand to form a monolayer protecting a gold cluster were established some time ago for alkanethiolate MPCs, but there has been no such information published for water-soluble MPCs. We identify 6 new ligands capable of forming water-soluble MPCs, as well as 22 water-soluble ligands that fail to form MPCs. Our findings contribute not only to the definition of the requirements for MPC formation but also to the variety of MPCs available for applications in chemistry and biology.     

First-principles analyses and predictions on the reactivity of barrier layers of Ta and TaN toward organometallic precursors for deposition of copper films

We present theoretical studies based on first-principles density functional theory calculations on the mechanisms of chemical vapor deposition of Cu-hexafluoracetylacetonato-trimethylvinylsilane (Cu(hfac)(tmvs)) on tantalum surfaces. This process has been used in the past to grow copper films via a disproportionation reaction and was found to exhibit adhesion problems. We show that the Ta surfaces are highly reactive and that the organic ligands in a copper precursor would undergo spontaneous decomposition upon contact with the Ta substrates. This may lead to contamination of the metal surfaces caused by the formation of carbide, fluoride, oxide species, or other fragments of the copper precursor on the barrier layer. We propose a practical solution for these adhesion problems caused by the CVD process by passivating the metal surfaces with N(2) to reduce their activity toward the precursor. Our extensive first-principles molecular dynamics simulations under typical deposition conditions predict that, for properly passivated TaN surfaces, only the copper atoms are firmly adsorbed on the surface, with loose Cu-ligand bonds. The ligands are sufficiently stable on these passivated surfaces, remaining slightly above the surface due to the repulsion between the electron-rich N-layer and the electron-rich ligand groups, and subsequently liberated upon the disproportionation reaction.