Synthesis,characterization and catalytic performance of nanosized iron-cobalt catalysts for light olefins production

Nanosized Fe-Co catalysts were prepared by co-precipitation method and studied for the conversion of synthesis gas to light olefins.In particular,the effects of a range of preparation variables such as Co/Fe molar ratios of the precipitation solution,pH value of precipitate,temperature of precipitation,promoters and loading of optimum promoter on the structure and catalytic performance are investigated.The optimal nano catalyst for light olefins (C2-C4) production was obtained over the catalyst with Co/Fe molar ratio of 3/1 which promoted with 2 wt% K.The results show that the best operational conditions were GHSV=2200 h-1 (H2/CO=2/1) at 260℃ under atmospheric pressure.Characterization of catalysts were carried out using X-ray diffraction (XRD),thermal gravimetric analysis (TGA),differential scanning calorimetry (DSC),scanning electron microscopy (SEM),transmission electron microscopy (TEM) and N2 physisorption measurements such as Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) methods.     

Kinetic study of oxidative coupling of methane over Mn and/or W promoted Na_2SO_4/SiO_2 catalysts

A comprehensive kinetic model for oxidative coupling of methane(OCM)over Mn and/or W promoted Na2SO4/SiO2 catalysts was developed based on a micro-catalytic reactor data.The methane conversion and ethylene,ethane,carbon monoxide and carbon dioxide selectivities were obtained in a wide operating condition range of 750 - 825-C,CH4/O2=2.5 - 10 and contact time=267 - 472 kg s m-3.Reaction networks of six models with different rate equation types were compared together.The kinetic rate parameters of each reaction network were estimated using linear regression or genetic algorithm optimization method(GA).A reaction network suggested by Stansch et al.for OCM was found to be the best one and was further used in this work.The suggested model could predict the experimental results of OCM reaction within a deviation range of ± 20%.     

A Novel Zirconium-Based Perovskite-Type Membrane Material for Oxygen Permeation

Zirconia with fluorite structure stabilized by doping rare earth or alkaline earth metal oxides such as Y2O3 and CaO (YSZ and CSZ) is a class of traditional mixed conducting membrane materials, which have been widely investigated for their high oxygen ionic conductivity and excellent chemical and thermal stability1-3. But the electronic conductivity of these materials is very small, unless operated with an internal or external circuitry, the oxygen flux through membranes in usual ranges of …     

Adaptation of Cu/ZnO/Al_2O_3 to Temperature Change in Methanol Synthesis from CO_2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change. The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation, and that this tendency was related to the difference in Cu/Cun+ ratio caused by CO2 and CO produced at different reaction temperatures. However, the reverse water-gas shift reaction (RWGS) induced at four temperatures was completely different from that of methanol synthesis. It implied that the two so-called competitive reactions in CO2+H2, RWGS and methanol synthesis, have different active centers.     

GaAs探测器实验标定

叙述了在闪光Ⅰ上用6MV轫致辐射实验标定快响应GaAs光电探测器的原理实验结果以及分析讨论。     

利用宽带声场干涉结构特性对移动船只距离的连续估计

浅海移动船只的宽带辐射声场在距离-频率上通常表现为有规则的干涉条纹结构,这些条纹的特性(数目和斜率)可用波导不变量理论来表征并已被用于多种水声反演问题中,如沉积层声学参数反演和宽带声源距离的估计。基于波导不变量理论和干涉条纹的结构特性,利用扩展卡尔曼滤波器分析移动船只LOFAR图中干涉条纹的距离-频率特征可对其距离进行连续估计。该方法不需要海洋环境的信息和前向拷贝声场计算,具有较高的计算效率。海试数据处理结果和GPS数据计算结果比较一致,证实了本方法的准确性。试验数据处理同样证实该方法对初始距离的选择有着较高的稳健性。     

含R_2dtc配体Mo-Cu化合物的动态~(95)Mo NMR

本实验利用动态~(95)Mo NMR监测Mo-Cu系列化合物的形成过程,对反应CuCl+NaR_2dtc+MoO_nS,摩尔比3:3:1,溶剂为DMF;R=Et,n=0(Ⅰ);R=Me,n=0(Ⅱ);R=Et,n=2(Ⅲ)进行了研究,观察到具有不同簇骼的多种中间产物的存在及随反应进程相互转化等现象。     

对DSC单峰纯度测定法的评述

指出了当前流行的差示扫描量热法DSC单峰法测样品纯度所基于的假定有一些不确切的地方,并用计算机动态摸拟了DSC实验过程,结果证实了本文的论断。