Self-assembly of electron donor-acceptor dyads into ordered architectures in two and three dimensions: surface patterning and columnar "double cables"

We report the synthesis and characterization of covalent dyads and multiads of electron acceptors (A) and donors (D), with the purpose of exploiting their nanophase separation behavior toward (a) two-dimensional (2D) surface patterning with well-defined integrated arrays of dissimilar molecular electronic features and (b) bulk self-assembly to noncovalent columnar versions of the so-called "double cable" systems, the likes of which could eventually provide side-by-side percolation pathways for electrons and holes in solar cells. Soluble, alkylated hexa-peri-hexabenzocoronenes (HBCs) bearing tethered anthraquinones (AQs) are shown by scanning tunneling microscopy (STM) to self-assemble at the solution-graphite interface into either defect-rich polycrystalline monolayers or extended 2D crystalline domains, depending on the number of tethered AQs. In the bulk, the thermal stability of the room-temperature HBC columnar phase is increased, which is attributed to the desired nanotriphase separation of HBC columns, insulating alkyl sheaths, and AQ units. Homeotropic alignment (columns normal to surfaces), predicted to be ideal for potential exploitation of such "double cables" in photovoltaic devices, is demonstrated.     

2,2'-二乙炔基-1,1'-联萘为模板构筑的新的环芳化合物的合成及其光学性质

基于2,2'-二取代的联萘衍生物在手性构型上高度稳定的特点,分别以光学活性的(R)-和(S)-2,2'-二乙炔基-1,1'-联萘为模板,设计了2个有趣的拓扑环芳分子四联萘笼状对映异构体(R,R,R,R)-2和(S,S,S,S)-2.其合成路线涉及保护基的控制导入、苯连接桥的链接、保护基的脱去以及偶合成环反应4个步骤.用MS,IR,UV-Vis,1HNMR,13CNMR和元素分析等技术对其进行了表征,并比较了其光学性质.研究结果表明,采用这种模板合成方法能够有效地获得具有单一手性的目标化合物.镜像特征的圆二色(CD)谱和比旋光度[α]D的测定结果清楚地反映了它们的对映异构关系.     

Ion Recognition and Analytical Application of a Fibroin Modified Electrode

A novel fibroin modified electrode with ion recognition was reported. The membrane with isoelectric point of pH 4.5, was modified on graphite and carbon fiber electrodes. The pH-responsive ion recognition of the modified electrode was investigated by use of some neurocompounds. The fibroin carbon fiber electrode has been used for in-vivo determination.     

Uniform Rice-like CdS Particles Prepared from Water-in-oil Microemulsions

IntroductionNano-sized semiconductors are of great interestdue to their special optical and electronic proper-ties[1,2].As one of the mostimportantⅡ—Ⅵsemicon-ductors,CdS has importantapplications in many fields,such as the solar cell field,non linear o…     

C反应蛋白免疫电极的研究

C反应蛋白(CRP)是临床医学中重要的检验项目之一。本文以醋酸纤维素-戊二醛-己二胺载体膜与自制的原电极研制成非标记CRP免疫电极。研究了载体膜的组成对电极灵敏度的影响,并采用均匀设计法对载体膜的活化条件、抗原抗体结合时间以及电极测试条件等进行了优化。该电极响应快、灵敏度高、重现性和稳定性良好。在最佳实验条件下,电极线性范围为1.8～60μg/ml,所得线性回归方程为E=0.2+0.091[CRP];相关系数0.9989。在用于血清样品的测定中,取得满意结果。     

共聚高分子混合物的分子热力学模型

以硬球链流体的分子热力学模型为基础 ,引入方阱位能相互作用的贡献 ,建立了共聚高分子混合物的分子热力学模型 .模型中具有物理意义的链节参数 (链节数、链节直径和链节间的相互作用能 )由纯物质的pVT关系拟合得到 ,而用来校正交叉作用能和交叉碰撞直径的可调参数需由液液平衡的实验数据回归得到 .采用了相对简单的处理方法来确定这些可调参数 .对所选共聚高分子混合物的共存曲线、互溶窗和互溶图等相行为的关联结果令人满意 .     

测定核黄素的化学发光新方法

研究了核黄素的化学发光性质，建立了一种测定核黄素的化学发光新方法，并应用于实际样品中核黄素的测定，与文献相比，本方法无需避光，而且分析体系和样品处理简单；干扰小，牛血清白蛋白、抗坏血酸、天冬氨酸等８种生物有机物质和 Ｃｕ（Ⅱ）、Ｚｎ（Ⅱ）、Ｆｅ（Ⅲ）等１５种常见金属离子的允许量较大；核黄素溶液浓度在０． １０～５０ ｍｇ／Ｌ范围内，与化学发光强度成正比，方法线性范围宽；测定１．０ｍｇ／Ｌ核黄素溶液１２次，求得相对标准偏差为２．９％，方法精密度高；方法的检测限为０．０７５ ｍｇ／Ｌ，灵敏度高。     

Synthesis of Molecularly Imprinted Polymer Particles by Suspension Polymerization in Silicon Oil

Molecular imprinting is a method to prepare polymers with recognition site of desired and predetermined selectivity1. Molecularly imprinted polymers (MIP) are prepared by copolymerizing functional and cross-linking monomers in the presence of a molecular …     

Novel Water Soluble Fluorescent Trimethine Indocyanines Containing N-ρ-Carboxybenzyl Group

Indocyanine dyes as fluorescent labeling reagents have been used in bioanalysis1,2. Arylsulfonate indocyanine dyes 1d and 1e developed by Waggoner A. S. et al.3,4 have excellent fluorescent properties combined with good aqueous solubility, are a new generation of fluorescent label compounds for proteins, oligonucleotides and other compounds containing hydroxyl, mercaptol or primary amine groups5. However, photostability of these dyes has been a problem. Z. G. YAO et al.6 reported that p…     

Efficient Synthesis of p-Hydroxyphenyl Ethanol from Hydrogenation of Methyl p-Hydroxyphenylacetate with CNTs-promoted Cu-Zr Catalyst

Hydrogenation of methyl p-hydroxyphenylacetate has been used for the synthesis of p-hydroxyphenyl ethanol. The reaction was catalyzed by Cu_iZr_j-x%(mass fraction) carbon nanotubes(CNTs) catalysts. Incorporation of a minor amount of CNTs into Cu_iZr_j oxide can visibly increase the catalytic activity for the synthesis of p-hydroxyphenyl ethanol. The yield of p-hydroxyphenyl ethanol reaches 94.2% over a co-precipitated catalyst of Cu₃Zr₁ oxide with 11.0%CNTs. Its catalytic activity shows no obvious decrease after three cycles. This is much better than the CNT-free co-precipitated catalyst with a good yield of 81.1%, Cu₃Zr₁-0%CNTs.