碳纳米颗粒的放射性99mTc标记

探索了影响氯化亚锡还原法制备碳纳米管和不同粒径纳米碳黑的99mTc标记化合物的多种因素, 在给定实验条件下, 99mTc的标记率能够稳定达到90％以上。 细胞培养液中标记物的放射化学纯度在2.5 h中保持在(86±4)%范围内。 制备的标记化合物满足碳纳米颗粒细胞摄取率测定和细胞毒性机制研究的实验要求。 实验结果提示, 99mTc标记过程是基于还原得到的低价Tc在碳纳米颗粒表面上的物理吸附机理。 The effects of experimental conditions on preparation of 99mTc labeled carbon nanotubes and nanocarbon blacks by SnCl2 were investigated. At given conditions the labeling yields were over 90%. In a culture medium, the radiochemical purity of the labeling compounds kept (86±4)% within 2.5 h. The 99mTc labeled multi walled carbon nanotubes (MWNTs) and nanocarbon blackes (NCBs) obtained in this work met satisfactory experimental demands for study of cellular uptake and toxicity. The experiments showed that the labeling process was based on physical adsorption of low valent technetium resulted from reduction reaction on the surface of the carbon nanomaterials.     

显示用上转换绿色发光材料NaYF4∶Er,Yb及其特性

采用喷射微波燃烧合成法制备了上转换发光显示器中发绿光的上转换发光材料NaYF4∶Er,Yb.测试了该材料的XRD衍射图谱和发光效率.给出了该材料在1 064 nm三种激光功率激发下的发光光谱.分析了该材料的上转换发光机理,得到545 nm和662 nm峰值发光分别是Er3+的4S3/2→4I15/2和4F9/2→4I15/2跃迁产生的.NaYF4∶Er,Yb具有较强的上转换绿光,同时存在的较弱的红光易于用滤色膜滤除,满足显示对三基色中绿色的要求;并且喷射微波燃烧合成法制备的该材料达到了高分辨率显示应用超细粉体的要求.     

数字投影三维数字成像的并行DSP实现

提出一种基于数字白光投影的三维数字成像嵌入式DSP处理系统.该系统根据时序变频条纹投影原理,利用TMS320DM642定点DSP和FPGA硬件电路以及多线程软件技术实现了条纹编码、编码图像采集和条纹分析的流水线处理过程.为了提高相位解调算法的速度,使用软件流水对其进行了优化.对于512×512像素图像,五步相移时的条纹图处理速度可达到39.7 fps,能满足快速条纹图处理的要求.测量实验表明,该系统可以实现快速、准确的三维轮廓测量.     

Influence of Dopants in ZnO Films on Defects

The influence of dopants in ZnO films on defects is investigated by slow positron annihilation technique. The results show S that parameters meet S_Al>S_un>S_Ag for Al-doped ZnO films, undoped and Ag-doped ZnO films. Zinc vacancies are found in all ZnO films with different dopants. According to S parameter and the same defect type, it can be induced that the zinc vacancy concentration is the highest in the Al-doped ZnO film, and it is the least in the Ag-doped ZnO film. When Al atoms are doped in the ZnO films grown on silicon substrates, Zn vacancies increase as compared to the undoped and Ag-doped ZnO films. The dopant concentration could determine the position of Fermi level in materials, while defect formation energy of zinc vacancy strongly depends on the position of Fermi level, so its concentration varies with dopant element and dopant concentration.     

金刚石中氦、氢含量的变化及在金刚石生长中的意义

天然金刚石自中心至边缘的显微傅里叶变换红外光谱研究表明:氮和氢在金刚石中的分布是不均匀的,这说明金刚石在整个生长过程中的物质环境是有差异的;中心至边缘的含氮总量、C-H键含量的总体降低趋势表明金刚石的生长过程是一个氮、氢的消耗过程,而中部的升高变化说明金刚石生长环境中存在氮、氢的补充,但氮补充得比氢更早一些.据此,可以将金刚石的生长过程划分为早期成核与长大、中期长大及末期长大三个阶段,其中早期和末期是氮和氢的消耗阶段,中期需要进行氮和氢的补充,且氮应该更早补充.氢对金刚石的生长是有利的,氢和氮不是以氮氢化合物的形式存在于金刚石生长的物质环境中,这暗示着在高温高压合成金刚石中欲引入氢,应当避免氮氢化合物的形成.     

Two Classes of New Exact Solutions to (2+1)-Dimensional Breaking Soliton Equation

The singular manifold method is used to obtain two general solutions to a (2 1)-dimensional breaking soliton equation, each of which contains two arbitrary functions. Then the new periodic wave solutions in terms of the Jacobi elliptic functions are generated from the general solutions. The long wave limit yields the new types of dromion and solitary structures.     

与双单色场作用的三能级原子的荧光光谱及双光子过程

本文应用修饰(Dress)变换理论研究了与一强单色激光场和一弱单色激光场相互作用的三能级原子系统,分析了系统的双光子过程特性,得出了原子的荧光光谱分布,并证明了它们与驱动激光场的强度以及频差的依赖关系。 关键词：     

Spatial anisotropy: a method to study anisotropic flow in heavy ion collisions

We introduce a method to study anisotropic flow parameter v<,n> as a collective probe to Quark Gluon Plasma in relativistic heavy ion collisions. The emphasis is put on the use of the Fourier expansion of initial spatial azimuthal distributions of participant nucleons in the overlapped region. The coefficients ε<,n> of Fourier expansion are called the spatial anisotropy parameter for the n-th harmonic. We propose that collective dynamics can be studied by v<,n>/ε<,n>. In this paper, we will discuss in particular the second (n=2) and the fourth (n=4) harmonics.     

一种光栅信号细分算法的FPGA实现

提出了一种基于FPGA的光栅位移传感器信号细分处理技术,采用CORDIC(坐标旋转数字计算机)解算相位,同时结合单准确度浮点运算,将辩向、粗码计数、相位解算、粗码精码浮点运算集成于单片FPGA实现,保证了细分的准确度、细分数据的有效计算准确度及信号处理的速度、设计中采用Altera公司的Cyclone Ⅱ_EP2C20...     

腔QED中利用超导量子干涉仪实现Toffoli门

基于腔量子电动力学技术,提出了利用三能级超导量子干涉仪实现Toffoli门的理论方案.利用超导量子干涉仪与腔场发生耦合,以及与外加经典脉冲发生共振跃迁来实现量子态的演化控制.该方案可以拓展到N比特Toffoli门的实现.最后,讨论了逻辑门的实验可行性,四比特Toffoli 门的作用时间约为30 nm,它远小于腔衰减时间...