考虑流体湿润性影响的核沸腾RohsenoW修正模型

添加界面活性剂的核沸腾在改变蒸气泡生长特性的同时，主要是强化了对流换热．本文考虑流体湿润性影响，对核沸腾换热沿用最广的对流类比模型－Ｒｏｈｓｅｎｏｗ模型进行了修正．通过对实验数据的检验，表明修正后的模型预示值与实测结果吻合很好．     

Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

T-RBAC访问控制模型及其约束描述语言

一种结合了基于任务的访问控制模型TBAC和基于角色的访问控制模型RBAC特点的新型访问控制模型-T-RBAC.该模型采用了以任务为中心的"用户-角色-任务-权限"的四级访问控制结构,较好地解决了当前工作流系统中存在的安全性问题.此外,在新模型的基础上设计了一套描述约束机制的语言ETCL,该语言在RCL2000的基础上扩充了时间特性和任务的概念,使新模型具备了较完整的约束描述能力.     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.     

生长曲线模型中回归系数阵的极大似然估计的精确分布

对于生长曲线模型,基于理论发展和应用效果的考虑,本文引入了Gauss型误差．在此误差下,本文研究了模型中回归系数阵的极大似然估计的精确分布,求出了此分布的密度和特征函数．     

Spatially Inhomogeneous Gain Modification in Photonic Crystals

The electric and magnetic energy distributions in photonic crystals （PC） are calculated by using the plane wave expansion （PWE） method. Even though the total electric and magnetic energy in each unit cell of photonic crystals are equal to each other, the ratio of electric and magnetic energy densities varies depending on the local position. Based on Fermi＇s golden rule, the optical gain is analysed in the full quantum framework that takes the nonuniform energy density ratio into account. This nonuniform energy density ratio in photonic crystals, defined in an equal form as gain modification factor, leads to spatially inhomogeneous modification of optical gain. Results reported in the paper provide a new perspective for analysing gain characteristics, as well as the lasing properties, in photonic crystals.     

金属氧化物薄膜的多离子束反应共溅射模型(Ⅱ)——数值计算与结果讨论

结合实验中的工艺技术参数,以Pb,Ti两金属靶的反应共溅射为例,对我们提出的金属氧化物薄膜的多离子束反应共溅射模型进行数值计算,分别得出了各靶的溅射速率R,反应腔中反应气体分压p以及衬底Pb,Ti的金属单质和氧化物所占的有效面积百分比与反应共溅射中直接可调的物理量,即反应气体总量Q和溅射离子束流J的关系.计算结果表明,该模型揭示了反应溅射具有滞回效应的本质特征,反映了反应共溅射中相关参数的相互影响与相互耦合的特点,给出了薄膜中组分原子百分比及其氧化物的形态与溅射工艺的关系,指出了多离子束反应共溅射中稳恒溅 关键词：     

α－蒎烯／苯乙烯共聚产物微臭氧化－薄层层析分离研究

建立了一种α－蒎烯／苯乙烯共用产物分离分析微臭氧化－薄层层析法．通过标准样品的分离和ＩＲ、ＮＭＲ表征以及共聚体组分的测定，表明这种方法对α－蒎烯／苯乙烯均聚体混合物和共聚产物中均、共聚体的分离完全，样品回收率很高，解决了α－蒎烯／苯乙烯均、共聚体无法分离分析的难题．     

一维螺旋状3，6-哒嗪二甲酸镉(Ⅱ)配位聚合物的合成与结构

Using the ligand pyridazine-3，6-dicarboxylate (H₂pzdc)， a coordination polymer [Cd₂(pzdc)₂(H₂O)₄] was synthesized and characterized by elemental analysis， thermal analysis， IR and single-crystal X-ray diffraction. The complex crystallizes in the tetragonal system with space group I4₁/a. The crystallographic data are: a=1.470 6(4) nm， c=1.489 8(6) nm， V=3.222 0(19) nm³， Z=16， μ=2.725 mm^-1， D_c=2.594 g·cm^-3， R₁=0.017 8， wR₂=0.044 6. In the complex， the cadmium(Ⅱ) ions with the eight-coordinated dodecahedral geometry are linked by the pzdc ligands to generate one-dimensional chains， which are associated into the three-dimensional architecture via O-H…O hydrogen bonding. CCDC: 658853.     

从芒果皮中提取果胶的工艺研究

果胶是一种大分子多糖类物质 ,具有良好的胶凝作用 ,用途广泛 ,在国内外市场上的销量很好。 1 990年世界上果胶总产量约 2 5 0 0 0吨 ,而我国 1 990年仅在食品工业上消耗的果胶就达 1 0 0 0吨 ,但国内市场上销售的果胶大部分为进口货[1] 。果胶在我国的生产仍处于开发阶段 ,所以发掘新的提取资源、提高果胶质量、降低果胶生产成本的意义十分重大。目前 ,已有以柑桔皮、向日葵盘、苹果皮、香蕉皮、马铃薯渣为原料提取果胶的研究报道 ,如何从芒果皮中提取果胶却未见报道。芒果在制造罐头和饮料中副产大量下脚料———芒果皮 ,未能得到充分利用…