二水·2-羰基丙酸水杨酰腙合铜(Ⅱ)配合物的晶体结构及生物活性

在水中,以2-羰基丙酸水杨酰腙与硫酸铜反应,制得新配合物Cu(C₁₀H₈N₂O₄)(H₂O)₂(C₁₀H₈N₂O₄^2-为2-羰基丙酸水杨酰腙负离子),并以水为溶剂培养了单晶,测试了晶体结构,该单晶为深绿色,属单斜晶系,空间群为C2/c,晶胞参数a=1.1297(1)nm,b=0.9824(8)nm,c=2.1973(3)nm,β=91.91(8)°,V=2.43749(8)nm³,Z=8,μ=1.817mm^-1,D_c=1.743Mg·m^-3,F(000)=1304,R=0.0264,wR=0.0654,GOF=1.052。其测试结果表明在配合物中Cu²⁺处于五配位的四方锥配位环境,配位原子分别来自1个三齿配体2-羰基丙酸水杨酰腙负二价离子的2个O原子和1个N原子,2个水分子中的O原子,其中1个水分子的O原子处于四方锥的锥顶,锥底的配位原子基本处于同一平面上。对该配合物所作的皿内抑菌试验和盆栽活体实验表明,配合物对小麦条锈病、白菜黑斑病及辣椒疫霉菌等分别有96%、89%、100%的抑制率,且有一定的助长作用。     

离子色谱法同时测定水中六种阳离子

研究了用抑制电导离子色谱法一次进样同时测定水中Li^ ,Na^ , NH4^ ,Mg^2 ,Ca^2 的色谱法条件，相对标准偏差小于0．5％，加标回收率在97．5％－104．0％。在水质分析中运用t检验法，比较了用钙、镁离子浓度计算和传统方法测定的总硬度之间是否存在显著性差异。     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...     

A New HPLC Method to Determine Carbonyl Compounds in Air

In this paper,a new HPLC method was established to determine the earbonyl compounds in air.As the absorbent,2,4-dinitrophenylhydrazint(2,4-DNPH)reaeted with earbonyls specifieally,which form the corresponding 2,4-dinitrophenylhydrazones,then analyzed by HPLC.The chromatographic conditions,the recovery rate,stability of samples,reagent blank,sampling efficiency were all studied systematically.The results showed that this established method had high sensitivity and good selectivity compared with other analytical methods,and it can detemine ten earbonyl compounds in air in 26 min simultancously.     

A vacuum ultraviolet photoionization mass spectrometric study of acetone

The photoionization and dissociative photoionization of acetone have been studied at the photon energy range of 8-20 eV. Photoionization efficiency spectra for ions CH3COCH3+, CH3+, C2H3+, C3H3+, C3H5+, CH(2-)CO+, CH3CO+, C3H4O+, and CH3COCH2+ have been measured. In addition, the energetics of the dissociative photoionization has been examined by ab initio Gaussian-3 (G3) calculations. The computational results are useful in establishing the dissociation channels near the ionization thresholds. With the help of G3 results, the dissociation channels for the formation of the fragment ions CH3CO+, CH2CO+, CH3+, C3H3+, and CH3COCH2+ have been established. The G3 results are in fair to excellent agreement with the experimental data.     

水热法合成Ce0.67Zr0.33O0.2固溶体研究

采用两种不同前驱体通过水热法合成了Ce0.67Zr0.33O0.2固溶体,并通过XRD,BET,TPR等手段考察了样品的相结构,比表面及还原特性.结果表明,在180℃,12 h的水热条件下,以共沉淀产物为前驱体所制得的Ce0.67Zr0.33O0.2固溶体比表面积较高,但存在一定程度的相分离;以凝胶产物为前驱体制得的Ce0.67Zr0.33O0.2固溶体结构更完整,具有良好的还原特性及热稳定性.     

大环二萜天然产物(±)-Mayol的全合成

西松烷型二萜类化合物是一大类广泛分布于松脂、烟草、陆地动物及海洋生物体中的具有十四元碳环骨架的化合物.其结构新颖复杂,且大多具有显著和广谱的生物活性.近几十年来,有关这类化合物的研究已引起了人们的极大兴趣.因此,开展这类天然产物及其类似物的全合成及构效关系的研究不仅具有重要的学术价值,而且具有潜在的应用前景.     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．     

超声提取-超高效液相串联质谱分析沉积物中15种抗生素

在现有方法基础上对沉积物中磺胺类、喹诺酮类、大环内脂类和四环素类抗生素的提取、富集、净化以及仪器分析方法进行了优化。以EDTA-Mcllvaine缓冲溶液与乙腈(V:V,1:1)混合液作为提取液,利用超声波细胞破碎仪进行超声提取,串联强阴离子交换柱(SAX)和HLB固相萃取柱进行固相萃取(SPE),通过超高效液相/串联质谱(UPLC-MS/MS)测定沉积物中抗生素的含量。抗生素基质加标回收率在56.4%~110%,相对标准偏差为1.1%~24.3%,方法检出限0.0055~0.716 ng/g。本方法有效地提高了沉积物中抗生素的提取效率,并应用于实际样品的测定中。