金属氧化物薄膜的多离子束反应共溅射模型(Ⅱ)——数值计算与结果讨论

结合实验中的工艺技术参数,以Pb,Ti两金属靶的反应共溅射为例,对我们提出的金属氧化物薄膜的多离子束反应共溅射模型进行数值计算,分别得出了各靶的溅射速率R,反应腔中反应气体分压p以及衬底Pb,Ti的金属单质和氧化物所占的有效面积百分比与反应共溅射中直接可调的物理量,即反应气体总量Q和溅射离子束流J的关系.计算结果表明,该模型揭示了反应溅射具有滞回效应的本质特征,反映了反应共溅射中相关参数的相互影响与相互耦合的特点,给出了薄膜中组分原子百分比及其氧化物的形态与溅射工艺的关系,指出了多离子束反应共溅射中稳恒溅 关键词：     

电流控阈技术及二值 I2L 施密特电路设计

电流控阈技术及二值Ｉ~２Ｌ施密特电路设计黄瑞祥，杭国强（杭州大学电子工程系杭州３１００２８）在数字电路中，以往对施密特电路的分析与研究大多局限于用电压信号来表示逻辑值的电路，例如ＴＴＬ、ＣＭＯＳ、ＥＣＬ等电路［１－３］．然而，对于以电流为信号的电流型?..     

α－蒎烯／苯乙烯共聚产物微臭氧化－薄层层析分离研究

建立了一种α－蒎烯／苯乙烯共用产物分离分析微臭氧化－薄层层析法．通过标准样品的分离和ＩＲ、ＮＭＲ表征以及共聚体组分的测定，表明这种方法对α－蒎烯／苯乙烯均聚体混合物和共聚产物中均、共聚体的分离完全，样品回收率很高，解决了α－蒎烯／苯乙烯均、共聚体无法分离分析的难题．     

一维螺旋状3，6-哒嗪二甲酸镉(Ⅱ)配位聚合物的合成与结构

Using the ligand pyridazine-3，6-dicarboxylate (H₂pzdc)， a coordination polymer [Cd₂(pzdc)₂(H₂O)₄] was synthesized and characterized by elemental analysis， thermal analysis， IR and single-crystal X-ray diffraction. The complex crystallizes in the tetragonal system with space group I4₁/a. The crystallographic data are: a=1.470 6(4) nm， c=1.489 8(6) nm， V=3.222 0(19) nm³， Z=16， μ=2.725 mm^-1， D_c=2.594 g·cm^-3， R₁=0.017 8， wR₂=0.044 6. In the complex， the cadmium(Ⅱ) ions with the eight-coordinated dodecahedral geometry are linked by the pzdc ligands to generate one-dimensional chains， which are associated into the three-dimensional architecture via O-H…O hydrogen bonding. CCDC: 658853.     

过渡金属钼钒砷杂多化合物的合成与TPR,TPD研究

Seven transition metal molybdovanadoarsenic heteropoly compounds have been synthesized and characterized using IR, UV, TG-DTA, pH potential titration techniques. The molecular formulae of these compounds are pro-posed to be H_xM_yAsMO₁₀V₂O₄₀·zH₂O(x=1～3, y=1,2, M=Cr, Mn, Fe, Co, Ni, Cu, Zn).They are all keggin structure. Surface nature of these compounds have been investigated by temperature programmed desorption and temperature programmed reduction techniques. NH₃-TPD results show that in TPD profiles of the compounds there are two desorption peaks corresponding to weak acid sites of desorption, respectively. Desorbing activativon energy and preexponential factor of weak acid site of desorption for compounds have been calculated. H₂-TPR re-sults show that introducting transtion metal to molybdovanarsenic acid, the reduction peak temperatures of H₂-TPR shift regularly with increasing d electron numbers of transition metals. In addition, Zn and Cu heteropoly com-pounds have yet apparent effect of hydrogen spill over.     

电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

微量元素与老年性痴呆

阐明了几种微量元素在人体内某些部位的含量变化及其对神经系统产生的影响 ,以及与阿尔茨海默病 (老年性痴呆病 ,AD)临床症状的关系。研究表明 ,一些AD发病机制诸如突触及神经元的丢失、细胞内神经原的缠结和细胞外的老年斑等 ,与病人体内某些微量元素含量的异常密切相关 ,而且影响机制复杂 ,途径多样。探明微量元素的作用机制 ,对AD病的防治和诊断意义重大     

巯基棉分离富集-荧光分析法测定水中痕量汞

实验发现,在pH 7.8的KH_2PO_4-NaOH缓冲介质中,十二烷基硫酸钠(SDS)可使Hg(Ⅱ)与吖啶橙(AO)反应后的荧光明显增强,据此建立了测定汞的荧光分析新方法。在最佳实验条件下,其质量浓度线性范围为0～200μg／L,检出限为2.47×10~(-9)g／mL。新建方法通过巯基棉分离富集汞,用于环境水样中痕量汞的测定,相对标准偏差为2.1％～4.7％,样品加标回收率为99.3％～101.2％,结果满意。     

Current Trend in Synthesis,Post‐Synthetic Modifications and Biological Applications of Nanometal‐Organic Frameworks (NMOFs)

Since the early reports of MOFs and their interesting properties, research involving these materials has grown wide in scope and applications. Various synthetic approaches have ensued in view of obtaining materials with optimised properties, the extensive scope of application spanning from energy, gas sorption, catalysis biological applications has meant exponentially evolved over the years. The far‐reaching synthetic and PSM approaches and porosity control possibilities have continued to serve as a motivation for research on these materials. With respect to the biological applications, MOFs have shown promise as good candidates in applications involving drug delivery, BioMOFs, sensing, imaging amongst others. Despite being a while away from successful entry into the market, observed results in sensing, drug delivery, and imaging put these materials on the spot light as candidates poised to usher in a revolution in biology. In this regard, this review article focuses current approaches in synthesis, post functionalization and biological applications of these materials with particular attention on drug delivery, imaging, sensing and BioMOFs.