原位合成分子筛膜毛细管色谱柱的研制

吸附型多孔层毛细管柱既耐高温又对气体及烃类异构体有选择性，同时又具有毛细管色谱快速、高效等优点，是解决难分离组分的重要柱型．常用作气一固吸附色谱固定相的有强极性的硅、中极性的氧化铝、非极性的碳质及特殊吸附作用的分子筛．其中分子筛以其独特的吸附作用，在永久性气体和烃类碳数族组成分析中有重要地位．Pruecell和Soulages[1，2]等制备了涂渍型5A和13X型分子筛的毛细管柱，对低碳烃类化合物显示了良好的分离能力，分析柱温较填充柱降低约100℃．邹乃忠等[3～5]也先后制备了分子筛层的毛细管柱用来作直馏汽油的分析．由于通…     

异戊二烯稀土催化聚合过程中配合物结构及其转化的~(13)C-NMR研究

本文用~(13)C-NMR研究了异戊二烯(IP)在均相催化剂(CF_3CO_2)_2LnCl·EtOH—(i-Bu)AlH—o-C_6D_4Cl_2作用下的聚合过程。单体首先被活化同稀土配位生成η~4-IP稀土配合物(反式和顺式),然后η~4-IP的C-3和C-4插入Ln-H键生成η~3-烯丙基稀土配合物——η~3-(2-甲基)丁烯基稀土配合物(同式和对式)。二维~(13)C-NMR交换谱表明η~4-IP和0η~3-烯丙基的每对异构体在常温下分别进行慢交换反应(互变异构),这一过程使插入反应在常温下得以进行。     

新型咔唑类卟啉的合成与性能

以咔唑、对氟苯甲醛和吡咯为原料制得meso-四（4-咔唑）苯基卟啉（TCPP）。以对硝基苯甲醛与吡咯为原料制得meso-四(4-硝基)苯基卟啉（TNPP）； TNPP经还原反应制得meso-四（4-氨基苯基）卟啉（TAPP）; TAPP与咔唑苯甲醛经缩合反应制得新型meso-四[对-（P-N-咔唑基亚苄基亚氨基）]苯基卟啉(TCIPP)，其结构和性能经UV-Vis, ¹H NMR, ¹³C NMR, IR,元素分析和循环伏安法（CV）表征。结果表明：TCPP在270~300 nm处有新吸收峰；TCIPP的Q带和B带相比于TCPP有明显红移。TCPP和TCIPP的E_LUMO和E_HOMO分别为-3.18 eV, -5.17 eV和-3.49 eV, -5.08 eV，两者的能级结构与纳米TiO₂的导带能级相匹配。     

Multi-objective optimization of inverse planning for accurate radiotherapy

The multi-objective optimization of inverse planning based on the Pareto solution set, according to the multi-objective character of inverse planning in accurate radiotherapy, was studied in this paper. Firstly,the clinical requirements of a treatment plan were transformed into a multi-objective optimization problem with multiple constraints. Then, the fast and elitist multi-objective Non-dominated Sorting Genetic Algorithm (NSGA-Ⅱ)was introduced to optimize the problem. A clinical example was tested using this method. The results show that an obtained set of non-dominated solutions were uniformly distributed and the corresponding dose distribution of each solution not only approached the expected dose distribution, but also met the dosevolume constraints. It was indicated that the clinical requirements were better satisfied using the method and the planner could select the optimal treatment plan from the non-dominated solution set.     

ZrO2修饰Cu催化剂还原以及反应过程中表面组成的变化

通过热分解法制备Cu模型催化剂,然后经浸渍制备ZrO₂/Cu催化剂,采用SEM、XPS考察了催化剂表面形态和组成,并采用in-situ Raman考察了催化剂在还原和吸附CO和水的过程中随时间的变化。结果表明,还原前Cu催化剂表面主要存在CuO物种,而在ZrO₂/Cu表面,除了CuO物种,还存在着大量的表面羟基物种。ZrO₂/Cu相对Cu更加容易还原为Cu⁰,同时,ZrO₂在催化剂表面聚集形成絮状态,而Cu催化剂还原后主要形成Cu₂O物种。Cu催化剂表面吸附CO后,除了形成Cu-CO外,Cu₂O物种均会迅速消失形成CO₂。Cu催化剂对水的作用比较弱,但是ZrO₂/Cu催化剂和水作用较强,并且通过Cu-OH中间物形成Cu₂O物种。     

酸性AlCl3-BMIC离子液体中的铝阳极溶解

采用线性扫描伏安法研究了Lewis 酸性AlCl₃-BMIC (BMIC: 1-butyl-3-methylimidazolium chloride)离子液体中铝电极的溶解. 铝电极在阳极极化时出现了钝化现象, 钝化是由于在铝电极表面形成了固体AlCl₃钝化膜造成的. 铝的电化学溶解过程可以依次分为三个区: 电化学控制区、过渡区和钝化区. 在电化学控制区, 铝的电化学溶解速率随着电位的正移而逐渐增加; 在过渡区, 由于电极表面AlCl₄^-和Al₂Cl₇^-浓度发生改变而析出固体AlCl₃使得铝电化学溶解速率随着电位的正移而逐渐减小; 当钝化膜形成之后, 铝的电化学溶解速率不再随着电位的正移而发生改变, 铝溶解进入钝化区. 增加搅拌、升高温度、降低离子液体AlCl₃摩尔分数都可以增加铝溶解阳极极限电流密度.     

ZnO纳米管有序阵列与Cu2O纳米晶核壳结构的光电化学性能及全固态纳米结构太阳电池研究简

采用电化学方法在铟锡氧化物(ITO)导电玻璃基底上制备了高度有序的ZnO纳米管阵列,然后在ZnO纳米管阵列上电化学沉积Cu2O纳米晶颗粒,获得了一维有序Cu2O/ZnO核壳式纳米阵列结构,通过控制Cu2O纳米晶的沉积电量得到不同厚度的Cu2O壳层,并对该核壳式纳米阵列的形貌和结构进行了分析. 以Cu2O/ZnO一维核壳式纳米阵列结构为光电极组装全固态纳米结构太阳电池,研究了Cu2O壳层厚度对光电极光吸收性能、光电性能以及组装电池光伏性能的影响,优化了电池中对电极材料的喷金厚度. 结果表明,以Cu2O沉积电量为1.5 C的Cu2O/ZnO为光活性层,以4 mA电流下真空镀金20~25 min的铜基底为对电极组装的简易太阳电池最高可获得0.013%的光电转换效率.     

Fast-scan chip-calorimeter measurement on the melting behaviors of melt-crystallized syndiotactic polystyrene

We employed fast-scan chip-calorimeter (FSC) measurement (Flash DSC1) to study the melting of syndiotactic polystyrene after melt-crystallized at various cooling rates as well as after isothermally crystallized at various high temperatures. We attributed the observed double melting peak to a melting-recrystallization process of beta-form crystals upon heating, as evidenced by their variations with different cooling and heating rates. Our experiments demonstrated the advantages of FSC techniques in the investigation of crystallization and melting behaviors of polymer materials.     

Aromatic Nitrogen Mustard‐Based Prodrugs: Activity,Selectivity, and the Mechanism of DNA Cross‐Linking

Three novel H₂O₂‐activated aromatic nitrogen mustard prodrugs ( 6 – 8 ) are reported. These compounds contain a DNA alkylating agent connected to a H₂O₂‐responsive trigger by different electron‐withdrawing linkers so that they are inactive towards DNA but can be triggered by H₂O₂ to release active species. The activity and selectivity of these compounds towards DNA were investigated by measuring DNA interstrand cross‐link (ICL) formation in the presence or absence of H₂O₂. An electron‐withdrawing linker unit, such as a quaternary ammonia salt ( 6 ), a carboxyamide ( 7 ), and a carbonate group ( 8 ), is sufficient to deactivate the aromatic nitrogen mustard resulting in less than 1.5 % cross‐linking formation. However, H₂O₂ can restore the activity of the effectors by converting a withdrawing group to a donating group, therefore increasing the cross‐linking efficiency (>20 %). The stability and reaction sites of the ICL products were determined, which revealed that alkylation induced by 7 and 8 not only occurred at the purine sites but also at the pyrimidine site. For the first time, we isolated and characterized the monomer adducts formed between the canonical nucleosides and the aromatic nitrogen mustard ( 15 ) which supported that nitrogen mustards reacted with dG, dA, and dC. The activation mechanism was studied by NMR spectroscopic analysis. An in vitro cytotoxicity assay demonstrated that compound 7 with a carboxyamide linker dramatically inhibited the growth of various cancer cells with a GI₅₀ of less than 1 μM , whereas compound 6 with a charged linker did not show any obvious toxicity in all cell lines tested. These data indicated that a neutral carboxyamide linker is preferable for developing nitrogen mustard prodrugs. Our results showed that 7 is a potent anticancer prodrug that can serve as a model compound for further development. We believe these novel aromatic nitrogen mustards will inspire further and effective applications.