Solid‐phase extraction of phenoxyacetic acid herbicides in complex samples with a zirconium(IV)‐based metal–organic framework

A zirconium(IV)‐based metal–organic framework material (MOF‐808) has been synthesized in a simple way and used for the extraction of phenoxyacetic acids in complex samples. The material has good thermal and chemical stability, large specific surface area (905.36 m²/g), and high pore size (22.18 Å). Besides, it contains a large amount of Zr‐O groups, easy‐to‐form Zr‐O‐H bond with carboxyl groups of phenoxyacetic acids, and possesses biphenyl skeleton structure, easy to interact with compounds through π‐π and hydrophobic interactions. These characteristics make the material very suitable for the extraction of certain compounds with a high extraction efficiency and excellent selectivity. The extraction conditions were optimized, and then an analytical method was successfully established and applied for analysis of actual samples. The solid‐phase extraction method based on prepared material had a wide linear range of 0.2–250 μg/L and a low detection limit of 0.1–0.5 μg/L for four phenoxyacetic acid compounds including 2,4‐dichlorophenoxyacetic acid, 2‐(2,4‐dichlorophenoxy) propionic acid, 4‐chlorophenoxyacetic acid, and dicamba. The relative standard deviations of intra‐ and interday precision were 1.8–3.8 and 4.3–6.9%, and the recoveries after spiking were between 77.1 and 109.3%. The results showed that the material is a desired substituent for the extraction of compounds with benzene ring structure containing carboxyl groups.     

太阳能热气流系统内传热与流动的实验模拟

构建了小尺寸太阳能热气流发电的实验模型,测定了系统的温度随时间和空间的分布,测定了烟囱内的速度随时间的变化关系.实验结果表明:集热棚内温度分布和季节对系统传热与流动特性的影响符合理论分析结果,而由于烟囱较薄,散热较高,在烟囱内的温度降低显著.     

二氧化碳两相回路启动时的压力脉冲现象及其抑制

机械泵驱动的二氧化碳两相回路热控系统在热载荷启动时,由于蒸发段的液-汽相变需要形核而容易造成过热.本文介绍了这部分的启动实验,结果发现,采用长程毛细管结构的蒸发器对分布式热源进行集热时,在冷工况、高热载荷、低热流密度的情况下会因液一汽相变导致压力脉冲.实验还给出了简单有效的方法抑制这种脉冲的影响.     

Criticality of Parasitic Disease Transmission in a Diffusive Population

Through using the methods of finite-size effect and short time dynamic scaling, we study the critical behavior of parasitic disease spreading process in a diffusive population mediated by a static vector environment. Through comprehensive analysis of parasitic disease spreading we find that this model presents a dynamical phase transition from disease-free state to endemic state with a finite population density. We determine the critical population density, above which the system reaches an epidemic spreading stationary state. We also perform a scaling analysis to determine the order parameter and critical relaxation exponents. The results show that the model does not belong to the usual directed percolation universality class and is compatible with the class of directed percolation with diffusive and conserved fields.     

A study on the real-time radiation dosimetry measurement system based on optically stimulated luminescence

The optically stimulated luminescent (OSL) radiation dosimeter technically surveys a wide dynamic measurement range and a high sensitivity. Optical fiber dosimeters provide capability for remote monitoring of the radiation in the locations which are difficult-to-access and hazardous. In addition, optical fiber dosimeters are immune to electrical and radio-frequency interference. In this paper, a novel remote optical fiber radiation dosimeter is described. The optical fiber dosimeter takes advantage of the charge trapping materials CaS:Ce, Sm that exhibit OSL. The measuring range of the dosimeter is from 0.1 to 100 Gy.     

国内首次超导高频系统束流调试及高功率试验

2004—2007年BEPC高频系统从常温腔改建到超导腔, 逐渐解决了改频的物理问题和超导技术的工程难题, 实现了与国际先进技术接轨, 并按期保质完成了工程、调束任务. 高频系统是BEPCⅡ工程首个吸收国外超导技术、自主完成集成和调试成功的大型装置; 2006年7月国内首次超导高频大功率试验成功; 2006年11月完成系统联调, 按期投入BEPCⅡ首轮调束; 同年12月首次投入同步辐射运行; 2007年2至5月, 东、西两套超导高频系统在1MV以上的加速电压均已实现正/负电子1.89GeV注入积累和110/114mA对撞; 在同步辐射运行中, 逐渐达到2.5GeV/250mA、束流功率100kW, 接近国外同类机器水平; 束流试验证明两套高频系统的     

Establishment of Configuration with Optimized Current Profile in Pellet Fuelled Discharge on HL-2A

A sawtooth-free period is produced following the pellet injection in the pellet fuelled discharge of qa = 3.4 （where qa is the safety factor at the plasma boundary） in the HL-2A tokamak. Establishment of the current profile such as in the hybrid scenario is studied under the condition of pellet injection in HL-2A. It is shown that a q-profile of weak negative shear is produced immediately after the pellet injection, and it then evolves to a broad flat profile with q0 〉 1 （where qo is the safety factor at the centre）. The measured MHD mode structures evidence consistencies of the evaluated q-profile with locations of the q = 1 surface in the sawtoothing period and of the q = 2 surface in the sawtooth-free period. TRANSP analysis indicates that the energy confinement is enhanced substantially during and after pellet injection, which is resulted from the q-profile optimization and the plasma density peaking.     

Electronic Curves Crossing in Methyl Iodide by Spin--Orbit Ab Initio Calculation

An ab initio investigation of electronic curve crossing in a methyl iodide molecule is carried out using spin-orbit multiconfigurational quasidegenerate perturbation theory. The one-dimensional rigid potential curves and optimized effective curves of low-lying states, including spin-orbit coupling and relativistic effects, are calculated. The spin-orbit electronic curve crossing between ^3Qo＋ and ^1Q1, and the shadow minimum in potential energy curve of ^3Qo＋ at large internuclear distance are found in both sets of the curves according to the present calcu- lations. The crossing position is in the range of Re-1 = 0.2370 3：0.0001 nm. Comparisons with other reports are presented.     

Experimental Characterization of Sub-picosecond Electron Bunch Length with Coherent Diffraction Radiation

Diffraction radiation is one of the most promising candidates for electron beam diagnostics for the International Linear Collider, x-ray free electron lasers and energy recovery linac due to its non-intercepting characteristics. We report the non-intercepting measurement of sub-ps electron bunch length with coherent diffraction radiation. The bunch length is measured with a Martin--Puplett interferometer and the detailed longitudinal bunch shape is reconstructed with the Kramers--Kronig relation. The rms bunch length is found to be about 0.73ps, which confirms a successful commissioning of the bunch compressor and the interferometer.     

Growth Mechanism and Optimized Parameters to Synthesize Nafion-115 Nanowire Arrays with Anodic Aluminium Oxide Membranes as Templates

Nation-115 nanowire arrays are synthesized with an extrusion method using AAO membranes as templates. It is indicated that the vacuum treating of AAO templates before surface decoration plays an important role in obtaining high filling rate of the Nation-115 nanowires in the AAO templates, vchile the concentration of Nafion-115 DMSO solutions does not affect the flling rate greatly. The optimized parameters to synthesize the Nation-115 nanowire arrays are studied. The filling rate of the Nadion-115 nanowires in the AAO templates synthesized with the optimized parameters is about 95% discussed to qualitatively explain the experimental results The growth mechanism of Nafion-115 nanowires is